Scribd
Upload
21 views3 pages

Product Specification (Pre-Released) SL-1L-2P709019-E08-V06: Antenna Specifications

The document provides specifications for the SL-1L-2P709019-E08-V06 antenna, which operates in the 790-960 MHz frequency range with a gain of 19 dBi and features an integrated replaceable RCU. It includes detailed electrical and mechanical properties, such as a maximum input power of 350W, dimensions of 2560×448×188 mm, and supports a mast diameter of 50-114 mm. The antenna is designed for various environmental conditions, with an operating temperature range of -40 to +65°C and a maximum wind speed of 200 km/h.

Uploaded by

Павел Сторожев
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
21 views3 pages

Product Specification (Pre-Released) SL-1L-2P709019-E08-V06: Antenna Specifications

The document provides specifications for the SL-1L-2P709019-E08-V06 antenna, which operates in the 790-960 MHz frequency range with a gain of 19 dBi and features an integrated replaceable RCU. It includes detailed electrical and mechanical properties, such as a maximum input power of 350W, dimensions of 2560×448×188 mm, and supports a mast diameter of 50-114 mm. The antenna is designed for various environmental conditions, with an operating temperature range of -40 to +65°C and a maximum wind speed of 200 km/h.

Uploaded by

Павел Сторожев
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Product Specification(Pre-released)

SL-1L-2P709019-E08-V06
1*790-960MHz
33deg 19dBi X pol 2-port antenna
Integrated and replaceable RCU, each band individually adjustable
2x4.3-10(F) connectors @bottom
Antenna Specifications

Electrical Properties

R1:790-960
Frequency Range(MHz)
790-862 880-960

at middle tilt 18.8 19.0


Gain (dBi)
over all tilt 18.7±0.3 18.8±0.3

Polarization +45°/-45°

Horizontal -3dB Beamwidth(°) 37±3 33±3

Vertical -3dB Beamwidth(°) 7.9±0.5 7.0±0.5

Electrical Downtilt(°) 0-8, continuously adjustable

First Upper Side Lobe Suppression (Typ.)(dB) ≥15 ≥15

Cross Polar Ratio (0°)(dB) ≥15 ≥15

Front to Back Ratio, ±30°(dB) ≥26 ≥26

VSWR <1.5

Cross-polar Isolation (dB) ≥25

PIM3 (2×43 dBm carrier)(dBc) ≤-153

Impedance(Ω) 50

Grounding DC Ground

Max. Average Input Power per Port(W) 350

Values based on NGMN-N-P-BASTA V11.1

A member of

Certifications
Product Specification(Pre-released)
Mechanical Properties

Radome Material Fiberglass

Radome Colour Light Grey

Connector Type 4.3-10(F)×2

Antenna Dimension (H×W×D)(mm) 2560×448×188

Packing Size (H×W×D)(mm) 2745×483×223

Antenna Net Weight (approx.) (kg) 35

Installation Kit Weight(kg) 5.6 (2 units)

Mechanical Downtilt(°) 0-8

Mast Diameter Supported(mm) 50-114

Pole Length(mm) >2500

Operating Temperature(℃) -40-+65

Wind Load (at 150 km/h) 1618/679/1780 N (Frontal/Lateral/Rear side)

Maximum Wind Speed (km/h) 200

RET Properties

Power Supply 10-30V dc

Power Consumption ≤2W (Idle), ≤10W (in Motion)

RS 485A/B(pin5, pin3); power supply(pin1, pin6); DC return(pin 7); according to


Hardware Interface
AISG 2.0/3GPP

Logical Interface HEX Coded Commands Based on HDLC Protocol

Protocol Supported AISG 2.0/3GPP

Adjustment Time (Full Range) <90s(typical, depending on model)

Adjustment Cycles >20000

Torque Max. ≥160 mN.m

Lightning Protection Rate IEC 61000-4-5 Current Pulse Profile, 8/20 μs Min. @8kA±5 Repetitions

2 Circle Connector According to IEC 60130-9 and AISG.


Connectors
Daisy Chain In: Male, Daisy Chain Out: Female
Product Specification(Pre-released)

Antenna Ports Array Layout

Reference Radiation Patterns


790-960MHz(33 deg)

You might also like