Scribd
Upload
41 views1 page

717 E Universal

The document describes the 717e Nylon Universal Stopper Plug, designed for use in explosive atmospheres with features for blanking unused cable entries. It is available in various colors and sizes, offers multiple tightening options, and has a temperature range of -60°C to +95°C. The product meets several global certification standards for ingress protection and compliance with safety regulations.

Uploaded by

bookmindmaping
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views1 page

717 E Universal

The document describes the 717e Nylon Universal Stopper Plug, designed for use in explosive atmospheres with features for blanking unused cable entries. It is available in various colors and sizes, offers multiple tightening options, and has a temperature range of -60°C to +95°C. The product meets several global certification standards for ingress protection and compliance with safety regulations.

Uploaded by

bookmindmaping
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

717 Ex

717e Ex
717e NYLON UNIVERSAL STOPPER PLUG,
EXPLOSIVE ATMOSPHERE Ex e
CONDUIT ACCESSORY

Provides means of blanking unused cable entries


Cost effective moulded design
Universal tightening design (hex head, allen key and slotted/flat screw head)
Temporary or permanent
Available in blue for intrinsically safe circuits
Approved entry thread sealing washer available
-60 to +95°C
+95˚C
UV
-60˚C

METRIC ORDERING NPT ORDERING


COLOUR SUFFIX
EXAMPLE EXAMPLE

BLACK - RAL9011 - 717EM2 717ET1

BLUE - RAL5015 4 717EM24 717ET14

TECHNICAL CLASSIFICATION GLOBAL PRODUCT CERTIFICATION

INGRESS PROTECTION RATING *MINIMUM IP68 DEPTH AND DURATION ATEX CERTIFICATE CML20ATEX3054X
IECEx CERTIFICATE IECEx CML 20.0038X
WITHOUT ENTRY THREAD SEAL FITTED IP66,IP67,IP68**,IP69,IP69K 1.1 metres for 16 hours** UKEX CERTIFICATE CML 21UKEX3237X

IP66,IP67,IP68**,IP69,IP69K 30 metres for 16 hours** ^ II 2G 1D Ex eb IIC Gb,


WITH ENTRY THREAD SEAL FITTED CODE OF PROTECTION CODE OF PROTECTION Ex eb IIC Gb, Ex ta IIIC Da
Ex ta IIIC Da
COMPLIANCE STANDARDS EN 60079-0, 7, 31 COMPLIANCE STANDARDS IEC 60079-0, 7, 31
AVAILABLE MATERIALS Halogen-free Polyamide
EAC CERTIFICATE RU C-GB.AД 07.B.02495/20 CCC CERTIFICATE 2020322313001727
CONTINUOUS OPERATING
-60°C to +95°C
TEMPERATURE
**Alternative depths / durations can be provided upon request.

ALLEN KEY METALLIC NON-METALLIC PRODUCT SELECTION TABLE - METRIC


DESCRIPTION
RECESS Ex 'd' Ex ‘e’ INDUSTRIAL Ex 'e' INDUSTRIAL
747 RECESSED ORDERING MINIMUM THREAD ACROSS CORNERS PROTRUSION
THREAD SIZE ACROSS FLATS ALLEN KEY SIZE
NON-TAMPER √ √ √ √ √ √ REFERENCE LENGTH DIAMETER LENGTH
PROOF TYPE ‘A’
747 RECESSED 717EM2 M20 10.0 24.0 26.3 7.0 8

THREAD CONVERSIONS & ACCESSORIES


TAMPER-PROOF √ √ √ √ √ √
TYPE ‘B’
717EM3 M25 10.0 28.0 30.7 7.0 10
757
x √ √ √ √ √
HEXAGON HEAD 717EM4 M32 10.0 38.0 41.7 8.0 10
757
HEXAGON HEAD x √ √ √ √ √ All dimensions shown are in millimetres unless otherwise stated
C/W O-RING SEAL

767 Ordering reference shown for black metric product


√ √ √ √ √ √
DOME HEAD

767
DOME HEAD √ √ √ √ √ √ PRODUCT SELECTION TABLE - NPT
C/W O-RING SEAL

717 ORDERING MINIMUM THREAD ACROSS CORNERS PROTRUSION


√ x x x √ √ THREAD SIZE ACROSS FLATS ALLEN KEY SIZE
UNIVERSAL REFERENCE LENGTH DIAMETER LENGTH

717ET1 1
⁄2” 14.0 24.0 26.3 7.0 8

717ET2 3
⁄4 ” 14.0 28.0 30.7 7.0 10

717ET3 1” 14.0 38.0 41.7 8.0 10

All dimensions shown are in millimetres unless otherwise stated

Ordering reference shown for black NPT product


For additional sizes please refer to stopper plug range at www.cmp-products.com

Dimensions listed are for metric accessories only. Dimensions for alternative threads may vary.

www.cmp-products.com TDS823 REV4 09/21

You might also like