Hamza Hashim BE, ME (Mechanical Engineer)

Senior Pipeline Engineer (Onshore)

Mechanical Design Engineer with 11 years of experience within the field of Pipeline design and stress analysis engineering for the oil & gas sector. The
greatest strengths are dedication, leadership skills and technical awareness that allow for identifying and solving the problems. In addition to technical
exposure, have HSE proficient training of 08 Golden Safety Rules, Work Permit (PTW), H2S Safety Awareness & SCBA, and Hazard Identification
Awareness.
Looking forward to a challenging position in an exceedingly high-quality engineering environment where the resourceful experience and academic skills
will add value to organizational operations.

Experience Personal Info

National Marine Dredging Company(Energy), Abu Dhabi – UAE Address:

Formerly, National Petroleum Construction Company Abu Dhabi – United Arab Emirates.

SENIOR ENGINEER - PIPELINE (JAN 2024 - PRESENT) Phone

+ 971-56-8059554
PROJECT: + 92-331-2706066
 3.6 billion USD EPC project for Maximizing Ethane Recovery and Monetization (MERAM) at Habshan
facility, for ADNOC Gas Processing UAE (On-going Project). E-mail ID
hamzahashim_1@[Link]
Pipeline SOW for MERAM Project:
 Ø30” x 118 Km pipeline of Stabilized NGL from Habshan-5 to Ruways Refinery based on AMSE Skype ID
B31.4. urs_hamza
 Ø36” x 9 Km pipeline of residue gas from Habshan Train 1&2 to Habshan 5 based on ASME B31.8.
 Ø36” x 9 Km pipeline of residue gas from Habshan Train 3 to Habshan 5 based on ASME B31.8. LinkedIn
 Ø48” x 9 Km pipeline of residue gas from Habshan 2 to Habshan 5 based on ASME B31.8. [Link]
hashim-09143455/
 Ø56” x 4 Km pipeline of sales gas from Habshan 5 to Sales Gas Network based on ASME B31.8.

Responsibilities for MERAM Project:

 Preparation of the pipeline design basis and design specifications (including Addendum to AGES - Certifications /
ADNOC General Engineering Specification, according to project requirements). Trainings
 Responsible to perform engineering calculations, such as, wall thickness calculation, mechanical
design calculations, and upheaval buckling calculation 8 Golden Safety Rule and Control of
 Preparation of the pipeline location class, route selection and block valve station selection study Work
report. (01 Day Training)
 Preparation of the intelligent pig scraper requirement report.
H2S Safety Awareness & self-
 Development of Datasheets for pipeline items, line-pipe, hot induction bend, ball valves, barred tee,
containing Breathing Apparatus
flanges, anchor flanges, Split tee and non-piggable items.
(01 Day Training)
 Accountable to prepare of material requisition for pipeline items and to develop the technical
Clarification for the offered Bids, and to preform Technical Bid evaluation accordingly. Hazard identification Awareness and
 Development of pipeline schedule, tie-in schedule, MTOs and BOQs for the pipeline items. Risk Assessment
(01 Day Training)

Penspen International Limited, Abu Dhabi - UAE Permit to Work

MECHANICAL ENGINEER (JAN 2023 – DEC 2023) (02 Days Training)

Responsibilities: Safety Observation & Conversation

 Accountable to conduct engineering evaluation for pipeline material selection with suitable thickness. (01 Day Training)
 Responsible to perform engineering analysis such as Stress Analysis for based on ASME B31.8 &
ASME B31.4, for projects relevant to oil and gas and petrochemical plants. First Aid training and ERP
(01 Day Training)
 Engineering assistance for the development of engineering drawings related to pipeline discipline that is
safe, cost-effective, and meets standards and specifications agreed with the client.
Problem Solving & Decision-
 Accountable to prepare the BOQs / material requirements, specifications, material requisitions, technical Making Skills
bid evaluations and data sheets. (01 Day Training)
Projects:
Management Development
 Pipeline detailed engineering for Single completion water injector Well (Type-02) of HB-016 for Haliba Programme – Level 1
Block, for ADNOC Al Dhafra Petroleum Operations Co. Ltd UAE. (03 Days Training)
 Pipeline FEED engineering for Tank farm expansion project for North Depot at Abu Dhabi Airport, for
ADNOC Civil Project and Engineering Services UAE. Time management
 Detailed engineering for clusters to Nodes pipeline under Buhasa Water Injection Recovery Project, for (01 Day Training)
ADNOC Onshore UAE.

Page 1 of 3
Descon Engineering Services and Technology, Karachi - Pakistan.
LEAD DESIGN ENGINEER (JUL 2022 – Jan 2023) Additional Courses
DESIGN ENGINEER (APR 2017 – JUN 2022)
CATIA V5 R18
Responsibilities:
(30 hours duration course)
 Execution of activities associated with Gas Pipeline Transportation (ASME B31.8).
 Comply with the engineering standards, as per the Client’s Standard and requirement. Well familiar with Supply Chain Management
ADCO and SAUDI ARAMCO (SAES) engineering standards related to pipeline engineering. (18 hours duration course)
 Engineering assistance for the development of line routing plan, alignment & approach drawing, pipeline
typical drawings, pipeline crossings.
 Pipeline calculations such as Elastic bend calculation, Virtual Anchor Length, Upheaval Buckling, K-
Peter method.
 Development of engineering specifications, drawings & perform calculations of the project in
Softwares
accordance with the project scope of work.
 Pipeline deliverables such as BOQs / Material Requisitions, Specifications, and Data Sheets are Caesar II, AutoCad, E-Tank & Korf
prepared.
 Undertake design and engineering relevant to pipeline discipline that is safe, cost-effective, and meets
standards and specifications agreed with the client. In addition, carry out technical evaluations of the Advanced
equipment and materials offered by vendors to ensure cost-effective and correct procurement.
PV-Elite, Ansys, Catia V5 & Pipenet
Pipeline EPC Projects for ADNOC Group:
 Pipeline Engineering support for South Asab Fields (Asab, Shah and Qusahwira fields) for ADCO UAE, Good
under the project of “Tie-In Works and pipeline at South-East Package B”.

Pipeline EPC Proposal for ADNOC Group:

 Estimation of pipeline related scope of work, for EPC Proposal of “ADCO Tie-In Works Package C &
D”, for ADCO UAE.
 Estimation of pipeline related scope of work, for EPC Proposal of “Replacement and Modification of
wellhead and flowlines of OGD-0 & OGD-II Ageing Network at Habshan-BAB Field”, for ADCO.
 Estimation of pipeline related scope of work, for EPC Proposal of “Call out Works for ASR Gas
Facilities in BAB & ASAB (Package A & Package B)”, for ADCO UAE.
 Estimation of pipeline related scope of work, for EPC Proposal of “Tie-in Works at ADNOC Onshore
Feed Packages (1, 2, 3 & 4)”.
Responsibilities: To prepare a technical write-up for pipeline discipline, Man-Power Deployment
Plan, Man-hour Estimation, Material Requirement, Risk register and tender documents.

Pipeline Engineering Projects:

 Detailed engineering of the Ø6” flow line from Latif-17 to Latif North-01 for UEP Pakistan.
 Detailed engineering of the Ø6” flow line from Latif-18 to Latif North-01 for UEP Pakistan.

Pipeline Engineering Projects with Construction Support:

 Detailed Engineering and Site Construction support for Ø12” sales gas export pipeline from Aliabad
Early Wellhead Testing (EWT) facility to Aliabad POD, for United Energy Pakistan.
 Detailed Engineering and Site Construction support for Ø8” flowline from Unarpur-01 wellhead to
Aliabad EWT facility, for United Energy Pakistan.
Responsibilities: To ensure the quality of construction and test compliance as per the engineering
design.

Petrochemical Engineering Consultants, Karachi - Pakistan

MECHANICAL ENGINEER (AUG 2013 - APR 2017)
Responsibilities:
 Designing and stress analysis of gas transportation pipelines as per ASME B31.8.
 Assistance for development of alignment drawings, pipeline details, and to perform relevant calculations
(wall thicknesses, bending and upheaval /buckling calculations) and specifications for pipelines.
 Performing wall thickness, bending and upheaval /buckling calculations for the pipeline.
 Preparations of specification for pipeline, coating, induction bends, and heat shrink sleeves etc.
 Evaluation, technical assessment, and analysis of the root cause of accident events.
 Preparation of engineering design work reports.

Page 2 of 3
Technical assessment of Accidental Pipelines:
 Technical evaluation and failure analysis of accident-related flow lines from Rajani to Salamat and
Salamat to Naimat for UEP Pakistan.
 Technical assessment and Root Cause Failure Analysis of accidental flowlines of K-19 to K-18 of
Kadanwari field, for ENI Pakistan.
 Pipeline Materials study for H2S corrosive environments based on NACE MR0175 / ISO15156 for UCH
Gas field for OGDCL, Pakistan.

Pipeline Designing Projects:

 Detailed Engineering for the pipelines based on ASME B31.8.
o Ø12” x 18.5 Km pipeline from Rajani to Sohrab via Bhanoki, for UEP Pakistan.
o Ø12” x 2.77 Km pipeline Rajani-3 with Indus River bund crossing design, for UEP Pakistan.
o Ø10” x 6.6 Km pipeline from Sohrab Deep to Kausar facility, for UEP Pakistan.
o Ø8” x 26.65 Km pipeline of Suleman field, Oil & Gas Development Company Ltd. Pakistan.
o Ø8” x 16.85 Km pipeline from Sajjal-1 to Sajawal X-1, for Mari Petroleum Company Ltd.
o Ø6” x 30 Km pipeline of Suleman field, for Oil & Gas Development Company Ltd. Pakistan.
o Ø6” x 4.86 Km pipeline from K-4 to South Valve Station of Kadanwari field for ENI Pakistan.
o Ø6” x 10.7 Km pipeline of Rehman-3 field for Polish Pakistan.

Existing Pipeline Assessment & Evaluation Projects:

 For Pakistan's Oil and Gas Development Company Limited, an assessment and evaluation of pipelines
was conducted.
o Ø6” x 3.76 Km pipeline of Mitrao field.
o Ø6” x 1.92Km pipeline of Chakdim field.
o Ø6” x 33.33Km pipeline of Chakdim field.

Education
Master of Engineering in Mechanical Engineering (Aug 2014 - May 2016)
NED University of Engineering and Technology, Karachi.
Bachelor of Engineering in Industrial & Manufacturing Engineering (Jan 2009 – Dec 2012)
NED University of Engineering and Technology, Karachi.

Page 3 of 3