Scribd
Upload
2K views2 pages

Insurbond 106-S Adhesive Application Guide

INSURBOND 106-S is a solvent-based adhesive designed for bonding PVC waterproofing membranes to various substrates, including concrete and metal. It offers strong adhesion, quick setting, and is environmentally safe, with a shelf life of up to 18 months when stored properly. Health and safety precautions are necessary when handling the product, including the use of protective clothing and immediate medical attention in case of exposure.

Uploaded by

hse.muhammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Insurbond 106-S Adhesive Application Guide

INSURBOND 106-S is a solvent-based adhesive designed for bonding PVC waterproofing membranes to various substrates, including concrete and metal. It offers strong adhesion, quick setting, and is environmentally safe, with a shelf life of up to 18 months when stored properly. Health and safety precautions are necessary when handling the product, including the use of protective clothing and immediate medical attention in case of exposure.

Uploaded by

hse.muhammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

TDS

INSURBOND 106-S
INSUWRAP INSURBOND 106-S
Contact Adhesive

Product Description
INSURBOND 106-S is a solvent-containing one-component adhesive with very strong adhesion properties on all normally
occurring substrates and to be used for bonding Insuwrap PVC waterproofing membranes to concrete, cement plaster
& metal sheets; where required.
Uses Application Instructions
u Concrete, aerated concrete, bricks and roughcast Surface Preparation
render Plywood, Fiber cement boards.
The surface has to be leveled, sound, dry and clean. Apply
u Polyurethane rigid foam boards with appropriate glass the adhesive uniformly on the substrate using a fine
facing. trowel, brush or roller. Allow the adhesive to set for approx.
15-20 minutes to become tacky then place the following
Perlite boards.

ACCESSORIES AND ANCILLARY PRODUCTS


u
material. Clean any excess with water immediately.
u Galvanized metal sheet, Stainless steel and aluminum.
u Other applications on request Technical Data
Insuwrap Insurbond 106-S Typical values
Advantages Colour Yellowish
u Environmentally safe Open Time 15 - 20 minutes
u Easy Application Coverage 200 - 300 g/m²
Application Tools Brush or roller
u Quick Setting
Ventilating Time Depending on temperature
u Suitable to most of the surfaces conditions, relative humidity
and quantity applied
u Good Coverage (ventilation test). Low
temperatures slow down and
u Heat Resistance
high temperature speed up
u Water Resistance ventilation.
Within days depending on
climatic conditions.
Up to 18 months in a covered
place with good ventilation.

When quality matters. [Link]


TDS

Storage & Shelf Life


INSURBOND 106-S

Store under cover, protect from direct sunlight and high


temperature (upto 38ºC). Shelf life is upto 18 months in
unopened container when stored as directed.
Failure to comply with the recommended storage
conditions may result in premature deterioration of the
product or packaging. Please follow law of the land.

Cleaning
Clean all the tools with warm water immediate.

Health & Safety


As with all chemicals, caution should always be exercised.
Protective clothing such as gloves and goggles should be
worn.
a. Inhalation: Inhalation of vapor or mist should be
avoided. Symptoms include coughing, wheezing,
laryngitis and shortness of breath, headache, nausea
and vomiting. Immediately shift victim to fresh air and
if needed immediately start artificial respiration. Give
oxygen if breathing is labored. Get emergency medical
help.
b. Eye Contact: Flush eyes with water for 15 minutes and
call for medical help.
c. Ingestion: Causes nausea, vomiting and loss of
consciousness. If accidentally swallowed do not induce
vomiting rather call for medical help immediately.
d. Skin contact: Flush with water or soap and water until
all traces have been removed. Seek medical attention
if required.
ACCESSORIES AND ANCILLARY PRODUCTS

Insuwrap Waterproofing Co. LTD New Industrial Area, P.O. Box 17579 Riyadh 11494, Saudi Arabia
Tel: 00966 11 498 0332, Fax: 00966 11 498 0655 [Link]

You might also like