PROJECT – G+3 COMPUTER LAB

CLIENT – ASSOSA UNIVERSTY

LOCATION - ASSOSA

Page 1 of 40
CHAPTER 1

INTRODUCTION

This report is the static analysis calculation on the structural design for G+3 Laboratory building, which
the construction site located in Assosa. This building is architecturally designed to give service mainly for
Laboratory purpose.

CHAPTER 2

DESIGN BASES
2.1 Geometry
The building is regular in plan and regular in elevation having the same story height.

TABLE: Story
Data
Master Similar Splice
Name Height Elevation Story To Story
mm mm
ROOF 4200 16800 No None No
THIRD 4200 12600 No FIRST No
SECOND 4200 8400 No FIRST No
FIRST 4200 4200 Yes None No
GROUND 3000 0 No None No
BASE 0 -3000 No None No

The building is regular in shape with different column sizes and beams. Solid slab system has
been adopted for the slab system. The columns are considered to be the main lateral force resisting
system along with the beams and slabs.

Page 2 of 40
Ground floor layout at Z=0m

Page 3 of 40
1st floor layout at Z=4.2m

Page 4 of 40
2nd floor layout at Z=4.8m

Page 5 of 40
3rd floor layout at Z=12.6m

Page 6 of 40
Roof floor layout at Z=16.8m

Page 7 of 40
2.3 Design Codes

EN 2005 Eurocode: Basis of Structural Design

EN 1991 Eurocode 1: Actions on structures
EN 2004 Eurocode 2: Design of concrete structures
EN 1997 Eurocode 7: Geotechnical design
EN 1998 Eurocode 8: Design of structures for earthquake resistance

2.4 Material Properties

The primary structural material is reinforced concrete. The concrete and reinforcement designation used
for the design and the relevant material properties are given below.

2.4.1 Concrete: Grade C25/30 for column

Table 2-2 Stress and deformation Characteristics for concrete

Strength class for concrete
fck (MPa) 24
fck,cube (MPa) 30
fcm (MPa) 38
fctm (MPa) 2.9
fctk, 0.05 (MPa) 2.0
fctk, 0.95 (MPa 3.8
Ecm (GPa) 31.18
εc1 (‰) 2.2
εcu1 (‰) 3.5
εc2 (‰) 2.0
εcu2 (‰) 3.5
n 2.0
εc3 (‰) 1.75

2.4.2 Concrete: Grade C20/25 for foundation, Slab & Beam

Strength class for concrete

fck (MPa) 20
fck,cube (MPa) 25
fcm (MPa) 28
fctm (MPa) 2.2
fctk, 0.05 (MPa) 1.5
fctk, 0.95 (MPa 2.9
Ecm (GPa) 30
εc1 (‰) 2.0
εcu1 (‰) 3.5
εc2 (‰) 2.0
εcu2 (‰) 3.5
n 2.0
εc3 (‰) 1.75

Page 8 of 40
2.4.3 Reinforcing Steel:

Page 206 prEN 1992-1-1 ANNEX C

Table 2-3 Properties of reinforcement steel
Characteristic yield strength fyk
or f0,2k (Mpa) 400 Mpa
Minimum Yield Strength, Fy 347
Minimum Tensile Strength, Fu 400

2.5 Frame Sections

TABLE: Frame Sections - Summary

Name Material Shape

BM-25X40 C25 Concrete Rectangular

BM-30X50 C25 Concrete Rectangular
COL30X40 C30 Concrete Rectangular
COL40X40 C30 Concrete Rectangular
COL40X50 C30 Concrete Rectangular
COL50X50 C30 Concrete Rectangular
GBM25X40 C25 Concrete Rectangular

2.6 Shell Sections

TABLE: Shell Sections - Summary

Design Element Total
Name Type Type Material Thickness
mm
SLAB200 Slab Shell-Thin C25 200

Page 9 of 40
CHAPTER THREE

Loads
This chapter provides loading information as applied to the model.

3.1 Load Patterns

TABLE: Load Patterns

Name Type Self-Weight Multiplier

DEAD Dead 1
LIVE Live 0

3.2 Applied Loads

→
ON SLAB
on ground and first floor slab
SUPER DEAD unit
LOADS thickness weight load
SDead floor finish - 0.03 27 0.81 kn/m2
cement screed- 0.05 23 1.15 kn/m2
celling plaster - 0.03 23 0.69 kn/m2

total
load 2.65 kn/m2

live load 3 kn/m2

Page 10 of 40
 ON BEAM
ground AND basement floor BEAM

unit
partition thickness height weight total
ground 0.2 3.8 14 10.64 kn/m

including plastering 0.025*2*23*3.8 4.3 kn/m

total
14.67
Truss Load 3 kn/m

3.2.1 Frame loads

TABLE: Frame Loads - Distributed

Design Load Force at Force at
Story Label Unique Name Type Pattern Direction Start End
kN/m kN/m
ROOF B1 361 Beam DEAD Gravity 3 3
ROOF B2 362 Beam DEAD Gravity 3 3
ROOF B166 494 Beam DEAD Gravity 3 3
ROOF B167 495 Beam DEAD Gravity 3 3
ROOF B168 496 Beam DEAD Gravity 3 3
ROOF B170 498 Beam DEAD Gravity 3 3
ROOF B171 499 Beam DEAD Gravity 3 3
ROOF B172 500 Beam DEAD Gravity 3 3
ROOF B173 423 Beam DEAD Gravity 3 3
ROOF B174 428 Beam DEAD Gravity 3 3
ROOF B175 433 Beam DEAD Gravity 3 3
ROOF B176 427 Beam DEAD Gravity 3 3
ROOF B177 432 Beam DEAD Gravity 3 3
ROOF B178 437 Beam DEAD Gravity 3 3
ROOF B6 503 Beam DEAD Gravity 3 3
ROOF B7 706 Beam DEAD Gravity 3 3
THIRD B1 501 Beam DEAD Gravity 14.6 14.6
THIRD B2 502 Beam DEAD Gravity 14.6 14.6

Page 11 of 40
THIRD B10 505 Beam DEAD Gravity 14.6 14.6
THIRD B151 622 Beam DEAD Gravity 3 3
THIRD B152 623 Beam DEAD Gravity 3 3
THIRD B153 624 Beam DEAD Gravity 3 3
THIRD B154 625 Beam DEAD Gravity 14.6 14.6
THIRD B156 627 Beam DEAD Gravity 14.6 14.6
THIRD B157 628 Beam DEAD Gravity 3 3
THIRD B158 629 Beam DEAD Gravity 3 3
THIRD B161 632 Beam DEAD Gravity 14.6 14.6
THIRD B163 634 Beam DEAD Gravity 14.6 14.6
THIRD B174 571 Beam DEAD Gravity 14.6 14.6
THIRD B175 576 Beam DEAD Gravity 14.6 14.6
THIRD B177 575 Beam DEAD Gravity 14.6 14.6
THIRD B178 580 Beam DEAD Gravity 14.6 14.6
THIRD B6 504 Beam DEAD Gravity 3 3
THIRD B7 724 Beam DEAD Gravity 3 3
THIRD B8 630 Beam DEAD Gravity 14.6 14.6
THIRD B14 635 Beam DEAD Gravity 14.6 14.6
SECOND B1 644 Beam DEAD Gravity 14.6 14.6
SECOND B2 645 Beam DEAD Gravity 14.6 14.6
SECOND B10 648 Beam DEAD Gravity 14.6 14.6
SECOND B11 649 Beam DEAD Gravity 14.6 14.6
SECOND B34 666 Beam DEAD Gravity 14.6 14.6
SECOND B35 667 Beam DEAD Gravity 14.6 14.6
SECOND B43 675 Beam DEAD Gravity 14.6 14.6
SECOND B44 676 Beam DEAD Gravity 14.6 14.6
SECOND B45 677 Beam DEAD Gravity 14.6 14.6
SECOND B46 678 Beam DEAD Gravity 14.6 14.6
SECOND B54 686 Beam DEAD Gravity 14.6 14.6
SECOND B55 687 Beam DEAD Gravity 14.6 14.6
SECOND B6 563 Beam DEAD Gravity 3 3
SECOND B7 730 Beam DEAD Gravity 3 3
SECOND B8 773 Beam DEAD Gravity 14.6 14.6
SECOND B14 778 Beam DEAD Gravity 14.6 14.6
FIRST B1 787 Beam DEAD Gravity 14.6 14.6
FIRST B2 788 Beam DEAD Gravity 14.6 14.6
FIRST B10 791 Beam DEAD Gravity 14.6 14.6
FIRST B11 792 Beam DEAD Gravity 14.6 14.6
FIRST B34 809 Beam DEAD Gravity 14.6 14.6
FIRST B35 810 Beam DEAD Gravity 14.6 14.6
FIRST B43 818 Beam DEAD Gravity 14.6 14.6
FIRST B5 914 Beam DEAD Gravity 14.6 14.6
FIRST B6 646 Beam DEAD Gravity 3 3
FIRST B7 759 Beam DEAD Gravity 3 3

Page 12 of 40
FIRST B8 916 Beam DEAD Gravity 14.6 14.6
FIRST B14 921 Beam DEAD Gravity 14.6 14.6
GROUND B6 647 Beam DEAD Gravity 3 3
GROUND B7 765 Beam DEAD Gravity 3 3
GROUND B8 1059 Beam DEAD Gravity 14.6 14.6
GROUND B8 1059 Beam DEAD Gravity 14.6 14.6
GROUND B14 1064 Beam DEAD Gravity 14.6 14.6
GROUND B14 1064 Beam DEAD Gravity 14.6 14.6
GROUND B20 425 Beam DEAD Gravity 14.6 14.6
GROUND B21 438 Beam DEAD Gravity 14.6 14.6
GROUND B22 444 Beam DEAD Gravity 14.6 14.6
GROUND B67 445 Beam DEAD Gravity 14.6 14.6
GROUND B68 451 Beam DEAD Gravity 14.6 14.6
GROUND B69 452 Beam DEAD Gravity 14.6 14.6
GROUND B75 458 Beam DEAD Gravity 14.6 14.6
GROUND B76 459 Beam DEAD Gravity 14.6 14.6

3.2.2 Area Loads

TABLE: Shell Loads - Uniform

Load
Story Label Pattern Direction Load
kN/m²
THIRD F1 DEAD Gravity 3
SECOND F1 DEAD Gravity 3
FIRST F1 DEAD Gravity 3
THIRD F1 LIVE Gravity 3
SECOND F1 LIVE Gravity 3
FIRST F1 LIVE Gravity 3

Page 13 of 40
3.3 Load Cases

TABLE: Load Cases - Summary

Name Type

DEAD Linear Static

LIVE Linear Static
SPEC1 Response Spectrum
SPEC2 Response Spectrum
SPEC3 Response Spectrum
SPEC4 Response Spectrum
SPEC5 Response Spectrum

3.4 Load Combinations

TABLE: Load Combinations

Load Scale
Name Case/Combo Factor Type Auto

COMB1 DEAD 1.35 Linear Add No

COMB1 LIVE 1.55
COMB2 COMB1 0.75 Linear Add No
COMB2 SPEC1 1
COMB3 COMB1 0.75 Linear Add No
COMB3 SPEC1 -1
COMB4 COMB1 0.75 Linear Add No
COMB4 SPEC2 1
COMB5 COMB1 0.75 Linear Add No
COMB5 SPEC2 -1
COMB6 COMB1 0.75 Linear Add No
COMB6 SPEC3 1
COMB7 COMB1 0.75 Linear Add No
COMB7 SPEC3 -1

Page 14 of 40
COMB8 COMB1 0.75 Linear Add No
COMB8 SPEC4 1
COMB9 COMB1 0.75 Linear Add No
COMB9 SPEC4 -1
COMB10 COMB1 0.75 Linear Add No
COMB10 SPEC5 1
COMB11 COMB1 0.75 Linear Add No
COMB11 SPEC5 -1
COMB12 COMB1 1 Envelope No
COMB12 COMB2 1
COMB12 COMB3 1
COMB12 COMB4 1
COMB12 COMB5 1
COMB12 COMB6 1
COMB12 COMB7 1
COMB12 COMB8 1
COMB12 COMB9 1
COMB12 COMB10 1
COMB12 COMB11 1

Page 15 of 40
CHAPTER FOUR

ANALYSIS AND DESFIGN RESULT

4.1 Stability Analysis

Load
Story P V Drift H θ Remark
Case/Combo
ROOF COMB1 Top 5133.375 0 0.000112 4.0000 #DIV/0! #DIV/0!
Non
0.001992 4.0000 0.0037
ROOF COMB2 Max Top 3850.0313 520.5301 Sway!
Non
0.0019936 4.0000 -0.0037
ROOF COMB2 Min Top 3850.0313 -520.5301 Sway!
Non
0.001992 4.0000 0.0037
ROOF COMB3 Max Top 3850.0313 520.5301 Sway!
Non
0.0019936 4.0000 -0.0037
ROOF COMB3 Min Top 3850.0313 -520.5301 Sway!
Non
0.001992 4.0000 0.0037
ROOF COMB4 Max Top 3850.0313 520.5301 Sway!
Non
0.0019936 4.0000 -0.0037
ROOF COMB4 Min Top 3850.0313 -520.5301 Sway!
Non
0.001992 4.0000 0.0037
ROOF COMB5 Max Top 3850.0313 520.5301 Sway!
Non
0.0019936 4.0000 -0.0037
ROOF COMB5 Min Top 3850.0313 -520.5301 Sway!
THIRD COMB1 Top 42267.964 0 0.0000848 4.0000 #DIV/0! #DIV/0!
Non
0.0000848 4.0000 0.0002
THIRD COMB2 Max Top 31700.973 2789.2192 Sway!
Non
0.0000848 4.0000 -0.0002
THIRD COMB2 Min Top 31700.973 -2789.219 Sway!
Non
0.0000848 4.0000 0.0002
THIRD COMB3 Max Top 31700.973 2789.2192 Sway!
Non
0.001992 4.0000 -0.0057
THIRD COMB3 Min Top 31700.973 -2789.219 Sway!
Non
0.0019936 4.0000 0.0057
THIRD COMB4 Max Top 31700.973 2789.2192 Sway!
Non
0.0000032 4.0000 0.0000
THIRD COMB4 Min Top 31700.973 -2789.219 Sway!
Non
0.0043312 4.0000 0.0123
THIRD COMB5 Max Top 31700.973 2789.2192 Sway!
Non
0.004336 4.0000 -0.0123
THIRD COMB5 Min Top 31700.973 -2789.219 Sway!
SECOND COMB1 Top 79375.553 0 0.0043312 4.0000 #DIV/0! #DIV/0!

Page 16 of 40
 Non
0.004336 4.0000 0.0148
SECOND COMB2 Max Top 59531.665 4368.3054 Sway!
Non
0.0043312 4.0000 -0.0148
SECOND COMB2 Min Top 59531.665 -4368.305 Sway!
Non
0.004336 4.0000 0.0148
SECOND COMB3 Max Top 59531.665 4368.3054 Sway!
Non
0.0043312 4.0000 -0.0148
SECOND COMB3 Min Top 59531.665 -4368.305 Sway!
Non
0.004336 4.0000 0.0148
SECOND COMB4 Max Top 59531.665 4368.3054 Sway!
Non
0.0000016 4.0000 0.0000
SECOND COMB4 Min Top 59531.665 -4368.305 Sway!
Non
0.0000016 4.0000 0.0000
SECOND COMB5 Max Top 59531.665 4368.3054 Sway!
Non
0.0000016 4.0000 0.0000
SECOND COMB5 Min Top 59531.665 -4368.305 Sway!
FIRST COMB1 Top 116697.62 0 0.0000016 4.0000 #DIV/0! #DIV/0!
Non
0.0043312 4.0000 0.0174
FIRST COMB2 Max Top 87523.217 5452.3144 Sway!
Non
0.004336 4.0000 -0.0174
FIRST COMB2 Min Top 87523.217 -5452.314 Sway!
Non
0.0000016 4.0000 0.0000
FIRST COMB3 Max Top 87523.217 5452.3144 Sway!
Non
0.0067376 4.0000 -0.0270
FIRST COMB3 Min Top 87523.217 -5452.314 Sway!
Non
0.0067408 4.0000 0.0271
FIRST COMB4 Max Top 87523.217 5452.3144 Sway!
Non
0.0067376 4.0000 -0.0270
FIRST COMB4 Min Top 87523.217 -5452.314 Sway!
Non
0.0067408 4.0000 0.0271
FIRST COMB5 Max Top 87523.217 5452.3144 Sway!
Non
0.0067376 4.0000 -0.0270
FIRST COMB5 Min Top 87523.217 -5452.314 Sway!
GROUND COMB1 Top 126596.9 0 0.0067408 4.0000 #DIV/0! #DIV/0!
Non
0.0067376 4.0000 0.0288
GROUND COMB2 Max Top 94947.677 5547.2433 Sway!
Non
0.0067408 4.0000 -0.0288
GROUND COMB2 Min Top 94947.677 -5547.243 Sway!
Non
0.0000016 4.0000 0.0000
GROUND COMB3 Max Top 94947.677 5547.2433 Sway!
Non
0.0000016 4.0000 0.0000
GROUND COMB3 Min Top 94947.677 -5547.243 Sway!
Non
0.0000016 4.0000 0.0000
GROUND COMB4 Max Top 94947.677 5547.2433 Sway!
Non
0.0000016 4.0000 0.0000
GROUND COMB4 Min Top 94947.677 -5547.243 Sway!

Page 17 of 40
 Non
0.0067376 4.0000 0.0288
GROUND COMB5 Max Top 94947.677 5547.2433 Sway!
Non
0.0067408 4.0000 -0.0288
GROUND COMB5 Min Top 94947.677 -5547.243 Sway!
Non
0.0000544 4.0000 -0.0002
THIRD COMB12 Min Top 31700.973 -2789.219 Sway!
SECOND COMB1 Top 79375.553 0 0.0078816 4.0000 #DIV/0! #DIV/0!
Non
0.0078752 4.0000 0.0268
SECOND COMB2 Max Top 59531.665 4368.3054 Sway!
Non
0.0078816 4.0000 -0.0269
SECOND COMB2 Min Top 59531.665 -4368.305 Sway!
Non
0.0078752 4.0000 0.0268
SECOND COMB3 Max Top 59531.665 4368.3054 Sway!
Non
0.0078816 4.0000 -0.0269
SECOND COMB3 Min Top 59531.665 -4368.305 Sway!
Non
0.0078752 4.0000 0.0268
SECOND COMB4 Max Top 59531.665 4368.3054 Sway!
Non
0.0078816 4.0000 -0.0269
SECOND COMB4 Min Top 59531.665 -4368.305 Sway!
Non
0.0078752 4.0000 0.0268
SECOND COMB5 Max Top 59531.665 4368.3054 Sway!
Non
0.0000416 4.0000 -0.0001
SECOND COMB5 Min Top 59531.665 -4368.305 Sway!
Non
0.0000416 4.0000 0.0001
SECOND COMB6 Max Top 59531.665 4368.3054 Sway!
Non
0.0000416 4.0000 -0.0001
SECOND COMB6 Min Top 59531.665 -4368.305 Sway!
Non
0.0000416 4.0000 0.0001
SECOND COMB7 Max Top 59531.665 4368.3054 Sway!
Non
0.0078816 4.0000 -0.0269
SECOND COMB7 Min Top 59531.665 -4368.305 Sway!
Non
0.0078752 4.0000 0.0268
SECOND COMB8 Max Top 59531.665 4368.3054 Sway!
Non
0.00008 4.0000 -0.0003
SECOND COMB8 Min Top 59531.665 -4368.305 Sway!
Non
0.0039472 4.0000 0.0134
SECOND COMB9 Max Top 59531.665 4368.3054 Sway!
Non
0.0039392 4.0000 -0.0134
SECOND COMB9 Min Top 59531.665 -4368.305 Sway!
Non
0.0039472 4.0000 0.0134
SECOND COMB10 Max Top 59531.665 4368.3054 Sway!
Non
0.0039392 4.0000 -0.0134
SECOND COMB10 Min Top 59531.665 -4368.305 Sway!
Non
0.0039472 4.0000 0.0134
SECOND COMB11 Max Top 59531.665 4368.3054 Sway!
Non
0.0039392 4.0000 -0.0134
SECOND COMB11 Min Top 59531.665 -4368.305 Sway!

Page 18 of 40
 Non
0.0039472 4.0000 0.0179
SECOND COMB12 Max Top 79375.553 4368.3054 Sway!
Non
0.0039392 4.0000 -0.0134
SECOND COMB12 Min Top 59531.665 -4368.305 Sway!
Non
0.0000592 4.0000 0.0004
FIRST COMB1 Top 116697.62 4368.3054 Sway!
Non
0.0000592 4.0000 -0.0003
FIRST COMB2 Max Top 87523.217 -4368.305 Sway!
Non
0.0000592 4.0000 -0.0002
FIRST COMB2 Min Top 87523.217 -5452.314 Sway!
Non
0.0000592 4.0000 0.0002
FIRST COMB3 Max Top 87523.217 5452.3144 Sway!
Non
0.0039472 4.0000 -0.0158
FIRST COMB3 Min Top 87523.217 -5452.314 Sway!
Non
0.0039392 4.0000 0.0158
FIRST COMB4 Max Top 87523.217 5452.3144 Sway!
Non
0.0039392 4.0000 -0.0158
FIRST COMB4 Min Top 87523.217 -5452.314 Sway!

*For 0.1<ϴ<0.2, a p-delta analysis was incorporated in the modeling.

Page 19 of 40
4.2 SLAB DESIGN

1ST Floor SLAB

2nd Floor Slab

Page 20 of 40
3rd Floor Slab

Page 21 of 40
4.3 FRAME DESIGN OUTPUT


2
BEAM LONGTIUDINAL REINFORCEMENT IN mm

GROUND FLOOR

Page 22 of 40
1ST FLOOR

Page 23 of 40
2ND FLOOR

Page 24 of 40
3RD FLOOR

Page 25 of 40
ROOF FLOOR

Page 26 of 40
 BEAM SHEAR PLUS TORSION REINFORCEMENT

GROUND FLOOR

Page 27 of 40
 1ST FLOOR

Page 28 of 40
2ND FLOOR

Page 29 of 40
3RD FLOOR

Page 30 of 40
ROOF FLOOR

Page 31 of 40
 COLUMN LONGTIUDINAL REINFORCEMENT

AXlS 1

AXlS 2

Page 32 of 40
 AXlS 3

AXlS 4

Page 33 of 40
 AXlS 5

AXlS 6

Page 34 of 40
 AXlS 7

AXlS 8

Page 35 of 40
 AXlS 9

AXlS 10

Page 36 of 40
 AXlS 11

AXlS 12

Page 37 of 40
 4.4 Foundation Design

Isolated Foundation was sized based on allowable bearing capacity recommendation given by the
geotechnical investigation. The investigation revealed that the soil has an allowable bearing capacity of
300 kPa for Isolated Foundation at a depth of -3 m below the ground floor level.

Joint reaction

Page 38 of 40
Page 39 of 40
Page 40 of 40
 TABLE: Joint Reactions
Joint Load
Story Label Case/Combo FX FY FZ MX MY MZ
BASE 86 COMB1 -5.9869 -0.825 2850.27 0.4207 -8.1475 -0.0134
BASE 14 COMB1 -9.7886 -6.211 2802.09 5.9748 -7.04 0.0133
BASE 11 COMB1 3.1548 0.4109 2642.20 -1.223 5.0515 -0.0051
BASE 83 COMB1 -3.1173 0.7157 2635.27 -1.6425 -4.9674 0.0077
BASE 84 COMB1 8.369 -8.4149 2630.62 7.4966 6.5152 -0.0167
BASE 85 COMB1 8.335 10.1439 2630.19 -10.2732 6.5286 0.0118
BASE 62 COMB1 -2.9054 -1.3931 2627.20 1.6601 -3.6109 -0.0029
BASE 38 COMB1 2.8513 -1.4215 2626.83 1.7176 3.5194 0.0024
BASE 54 COMB1 -0.2299 -0.5128 2599.26 0.6672 -0.5053 0.0027
BASE 46 COMB1 0.1795 -0.9273 2595.42 1.2715 0.4192 0.0002 F1
BASE 12 COMB1 -10.205 -7.5882 2536.92 6.821 -8.3955 0.0166
BASE 59 COMB1 -2.9137 1.7931 2522.21 -2.1805 -3.6019 0.0017
BASE 35 COMB1 2.9177 1.7646 2522.08 -2.1229 3.649 -0.0009
BASE 43 COMB1 0.221 0.8232 2494.60 -1.0408 0.5077 0.0029
BASE 51 COMB1 -0.212 1.2381 2490.73 -1.6455 -0.4553 0.0011
BASE 13 COMB1 -10.0365 -0.1463 2485.23 -0.1388 -8.1879 -0.0116
BASE 61 COMB1 -3.8422 8.6459 2241.62 -8.3338 -4.2051 0.001
BASE 37 COMB1 3.9291 8.6217 2240.78 -8.2802 4.3222 -0.0033
BASE 36 COMB1 3.7506 0.8815 2189.07 -0.9674 4.0691 0.0029
BASE 60 COMB1 -4.0235 0.906 2188.23 -1.0212 -4.4593 -0.0044
BASE 45 COMB1 -1.5558 5.878 1908.12 -5.5783 -1.2275 0.0013
BASE 9 COMB1 0.1469 9.0073 1902.17 -10.1498 0.3324 -0.0152
BASE 81 COMB1 -0.0295 9.0987 1901.27 -10.3599 -0.1021 0.0161
BASE 88 COMB1 -0.1862 -7.424 1899.29 7.6315 -0.3403 -0.0212
BASE 53 COMB1 1.3027 5.8096 1868.01 -5.7296 1.0528 -0.0003
BASE 52 COMB1 1.4725 3.6634 1854.42 -3.7039 1.105 0.0021
BASE 16 COMB1 0.1988 8.7676 1840.06 -7.7823 0.3513 0.0223
BASE 44 COMB1 -1.3994 3.7339 1814.31 -3.5546 -1.1883 -0.0002
BASE 21 COMB1 -5.6171 11.1256 1722.12 -10.7296 -4.3405 -0.0102
BASE 77 COMB1 5.837 11.2434 1720.13 -10.8969 4.5382 0.0102
BASE 63 COMB1 -2.692 -7.303 1683.61 7.6769 -3.5099 0.0276
BASE 39 COMB1 2.6642 -7.322 1683.58 7.7254 3.4498 -0.0293
BASE 69 COMB1 4.1859 11.0995 1673.30 -10.6331 2.8219 0.0004
BASE 29 COMB1 -4.2336 11.0583 1672.30 -10.5489 -2.8629 -0.0006
BASE 20 COMB1 -5.7113 -1.749 1672.28 1.5089 -4.4865 -0.0027
BASE 76 COMB1 5.7291 -1.7479 1669.92 1.4424 4.3832 0.0043
BASE 47 COMB1 0.2759 -7.5713 1649.51 7.9949 0.5476 0.0055
BASE 55 COMB1 -0.3023 -7.3006 1649.50 7.5371 -0.6068 -0.003
BASE 58 COMB1 -2.66 -3.7596 1632.35 2.8794 -3.4245 -0.0311
BASE 34 COMB1 2.7014 -3.7781 1632.29 2.9273 3.5409 0.0288
BASE 68 COMB1 4.0937 -1.7723 1620.81 1.6367 2.6733 0.0031 F2
BASE 28 COMB1 -4.3413 -1.8 1619.62 1.708 -3.0292 -0.0021
BASE 30 COMB1 -5.8167 -1.6575 1616.30 1.9366 -4.0699 -0.0309
BASE 70 COMB1 5.6812 -1.6269 1610.85 1.8625 3.8966 0.0318
BASE 42 COMB1 0.3098 -3.8277 1598.30 3.1419 0.6355 -0.0035
BASE 50 COMB1 -0.2693 -3.557 1598.30 2.684 -0.52 0.0064
BASE 22 COMB1 8.9658 2.0747 1584.12 -1.7941 9.9187 0.0105
BASE 27 COMB1 -5.7251 1.5964 1510.05 -1.7739 -3.897 0.0282
BASE 67 COMB1 5.7003 1.6368 1504.71 -1.8572 3.9146 -0.0264
BASE 19 COMB1 8.7465 2.8806 1482.57 -3.2034 9.8049 -0.0216
BASE 78 COMB1 -8.5388 1.7344 1448.46 -1.5079 -9.5523 -0.0091
BASE 75 COMB1 -8.7744 3.3323 1346.02 -3.7164 -9.7877 0.0245
BASE 6 COMB1 10.7915 -1.3223 1344.77 1.7653 12.9337 0.0094
BASE 94 COMB1 5.1304 -1.402 1283.05 1.805 2.0639 -0.0118
BASE 3 COMB1 -2.8911 1.2391 1127.44 -1.5505 -0.0077 0.0022
BASE 91 COMB1 2.8927 1.4748 1123.69 -1.9224 0.0589 0.002
BASE 24 COMB1 -8.9794 -12.7688 1112.36 12.9307 -8.8279 -0.033
BASE 17 COMB1 -8.8146 -3.4334 1052.71 2.5231 -8.6441 0.0186
BASE 31 COMB1 -3.4001 -5.831 1021.59 6.1462 -1.5825 0.2103
BASE 71 COMB1 3.3741 -5.8175 1021.19 6.0886 1.5244 -0.2137
BASE 93 COMB1 -24.2458 -1.6166 1000.21 1.8836 -25.1635 -0.0173
BASE 92 COMB1 -24.4111 1.6658 994.81 -1.9826 -25.3564 -0.0046
BASE 80 COMB1 8.963 -12.3115 985.31 12.4701 8.8137 0.0378
BASE 26 COMB1 -3.3367 -3.0635 950.53 2.5458 -1.4661 -0.2106
BASE 66 COMB1 3.366 -3.0305 950.15 2.4697 1.5714 0.2155
BASE 73 COMB1 8.8471 -3.871 925.40 2.845 8.7956 -0.0171
BASE 5 COMB1 25.9836 -1.6758 916.59 1.9734 26.6309 0.0159 F3
BASE 4 COMB1 25.9875 1.6336 911.28 -1.8032 26.5856 0.0125
BASE 8 COMB1 12.1205 1.1326 869.39 -0.3568 12.1714 0.0222
BASE 96 COMB1 -12.0757 1.0915 869.37 -0.3574 -12.1336 -0.0332
BASE 1 COMB1 12.1405 -1.1288 866.10 0.4932 12.2214 -0.0099
BASE 89 COMB1 -12.0486 -1.0123 866.06 0.2392 -12.0185 0.0106
 Project COMPUTER LAB Date 2021
Description Footing Design By H.M.
Chkd H.M.

FOOTING F1

2850.2709 kN Fz= 2850 Mx= 0

Fx= -6 My= -8
Fy= -1

Depth of foundation Col Size 0.4 * 0.5

2.5
Column eccentricity
x-direction
0 Y-direction t = 1.00

d = 0.934 Critical Sections

3.2 m 1.6
0.5d = 0.467

3.2 m

Step 1 - Check Soil Pressure

Net Allowable Soil Pressure = 300 kPa

eb = -0.007

el = -0.001

P  6 eb 6 el 
q  1   
A B L 

P = 3106.2709 = 303.3 kPa

A 10.24

 6 eb 6 el 
1    0.9850565
 B L  1.0149435

q max = 298.8 kPa OK

q min = 307.9 kPa OK
 Project COMPUTER LAB Date 2021
Description Footing Design By H.M.
Chkd H.M.

FOOTING F1

Step 2 - Check Thickness

A-Check Punching Shear

Tributary Area for

Punching Shear

3.2 m
0.5d = 0.467

3.2 m

Pressure = 392.04 kPa

2
Trib. Area = 8.33 m
Shear = 3264.52 kN

Punching Shear Capacity of Footing

Vc  0.25f ctdk1k2bwd

f ctd = 1164.846941
K1 = (1+50r)
r = 0.00127
= 1.06
d = 0.934
K2 = 1.6 -d = 1
bw = 13.01

= 3762.50 kN OK
 Project COMPUTER LAB Date 2021
Description Footing Design By H.M.
Chkd H.M.

FOOTING F1
Check one-way Action d = 0.934

Tributary Area for

one-way action

3.2 m

3.2 m

Calculate Shear @ Critical Section

397.9

386.2 kPa

Critical Section From Edge of Footing is = 0.466 m Y-dre.

0.416 m X-dre.
Pressure At Critical Section is = 196 kPa Y-dre.
175 kPa X-dre.
Shear At Critical Section is = 585 kN Y-dre.
522 kN X-dre.

Shear Capacity of Section

Vc  0.25f ctdk1k2bwd

Long direction Short direction

f ctd = 1165 f ctd = 1165
K1 = (1+50r) K1 = (1+50r)
r = 0.00127 r = 0.00129
= 1.06 = 1.06
d = 0.934 d = 0.934
K2 = 1.6 -d = 1 K2 = 1.6 -d = 1
bw = 3.20 bw = 3.20

= 925.59 kN OK 926.40 kN OK
 Project COMPUTER LAB Date 2021
Description Footing Design By H.M.
Chkd H.M.

FOOTING F1
Step 3 - Design for Flexure

397.9

386.2

Critical Section For Moment

Critical Section From Edge of Footing is = 1.35 Y-dre.

1.4 X-dre.
Moment At Critical Section is = 357.2443549 kN - m/m Y-dre.
384.1969468 kN - m/m X-dre.

Calculate Reinforcement

1  2 mR n  f M
r req  1 - 1-  m 
yd
R n  u
m  f yd  ; ; bd 2
f cd

C= 30
f cd = 13600.000 Kpa
S= 400.000
f yd = 347826.09 Kpa
d = 0.934 m
b = 1.00 m

m = 25.58
Rn = 409.52 long
440.41 short

= 0.0012500 long
0.0012874 short
Y-dre. As = 0.00117 = 5.807 Dia 16 bars
X-dre. As = 0.00120 = 5.980 Dia 16 bars
Y-dre. Use f 16 @ 150
Use f 16 @ 172.2158

X-dre. Use f 16 @ 150

Use f 16 @ 167.2152
 Project COMPUTER LAB Date 2021
Description Footing Design By H.M.
Chkd H.M.

FOOTING F2

1722.1169 kN Fz= 1722 Mx= -11

Fx= -6 My= -4
Fy= 11

Depth of foundation Col Size 0.4 * 0.5

2.5
Column eccentricity
x-direction
0 Y-direction t = 0.80

d = 0.736 Critical Sections

2.6 m 1.3
0.5d = 0.368

2.6 m

Step 1 - Check Soil Pressure

Net Allowable Soil Pressure = 300 kPa

eb = -0.010

el = 0.009

P  6 eb 6 el 
q  1   
A B L 

P = 1857.3169 = 274.8 kPa

A 6.76

 6 eb 6 el  0.9983862
1   
 B L  1.0016138

q max = 274.3 kPa OK

q min = 275.2 kPa OK
Step 2 - Check Thickness

A-Check Punching Shear

Tributary Area for

Punching Shear

2.6 m
0.5d = 0.368

2.6 m

Pressure = 358.80 kPa

Trib. Area = 5.36 m2
Shear = 1921.72 kN

Punching Shear Capacity of Footing

Vc  0.25f ctdk1k2bwd

f ctd = 1164.8469
K 1 = (1+50r)
r = 0.00125
= 1.06
d = 0.736
K 2 = 1.6 -d = 1
bw = 10.63

= 2421.20 kN OK
Check one-way Action d = 0.736

Tributary Area for

one-way action

2.6 m

2.6 m

Calculate Shear @ Critical Section

359.4

358.2 kPa

Critical Section From Edge of Footing is = 0.364 m Y-dre.

0.314 m X-dre.
Pressure At Critical Section is = 177 kPa Y-dre.
153 kPa X-dre.
Shear At Critical Section is = 340 kN Y-dre.
293 kN X-dre.

Shear Capacity of Section

Vc  0.25f ctdk1k2bwd

Long direction Short direction

f ctd = 1165 f ctd = 1165
K1 = (1+50r) K1 = (1+50r)
r = 0.00125 r = 0.00125
= 1.06 = 1.06
d = 0.736 d = 0.736
K2 = 1.6 -d = 1 K2 = 1.6 -d = 1
bw = 2.60 bw = 2.60

= 592.09 kN OK 592.09 kN OK
Step 3 - Design for Flexure

359.4

358.2

Critical Section For Moment

Critical Section From Edge of Footing is = 1.05 Y-dre.

1.1 X-dre.
Moment At Critical Section is = 197.79085 kN - m/m Y-dre.
217.07657 kN - m/m X-dre.

Calculate Reinforcement

1  2 mR n  f M
r req  1 - 1-  m 
yd
R n  u
m  f yd  ; ; bd 2
f cd

C= 30
f cd = 13600.000 Kpa
S= 400.000
f yd = 347826.09 Kpa
d = 0.736 m
b = 1.00 m

m = 25.58
Rn = 365.13 long
400.74 short

= 0.0012500 long
0.0012500 short
Y-dre. As = 0.00092 = 5.976 Dia 14 bars
X-dre. As = 0.00092 = 5.976 Dia 14 bars
Y-dre. Use f 14 @ 150
Use f 14 @ 167.324

X-dre. Use f 14 @ 150

Use f 14 @ 167.324
 Project COMPUTER LAB Date 2021
Description Footing Design By H.M.
Chkd H.M.

FOOTING F3

994.8077 kN Fz= 995 Mx= -2

Fx= -24 My= -25
Fy= 2

Depth of foundation Col Size 0.4 * 0.5

2.5
Column eccentricity
x-direction
0 Y-direction t = 0.50

d = 0.438 Critical Sections

1.6 m 0.8
0.5d = 0.219

1.6 m

Step 1 - Check Soil Pressure

Net Allowable Soil Pressure = 300 kPa

eb = -0.084

el = 0.002

P 6 eb 6 el 
q  1   
A B L 

P = 1026.8077 = 401.1 kPa

A 2.56

 6 eb 6 el  0.6924853
1   
 B L  1.3075147

Linear Interpolatio=

q max = 277.8 kPa OK

q min = 524.4 kPa OK
Step 2 - Check Thickness

A-Check Punching Shear

Tributary Area for

Punching Shear

1.6 m
0.5d = 0.219

1.6 m

Pressure = 547.32 kPa

2
Trib. Area = 1.77 m
Shear = 970.92 kN

Punching Shear Capacity of Footing

Vc  0.25f ctdk1k2bwd

f ctd = 1164.846941
K1 = (1+50r)
r = 0.00138
= 1.07
d = 0.438
K2 = 1.6 -d = 1.162
bw = 7.06

= 1118.12 kN OK
Check one-way Action d = 0.438

Tributary Area for

one-way action

1.6 m

1.6 m

Calculate Shear @ Critical Section

715.6

379.0 kPa

Critical Section From Edge of Footing is = 0.162 m Y-dre.

0.112 m X-dre.
Pressure At Critical Section is = 202 kPa Y-dre.
140 kPa X-dre.
Shear At Critical Section is = 142 kN Y-dre.
98 kN X-dre.

Shear Capacity of Section

Vc  0.25f ctdk1k2bwd

Long direction Short direction

f ctd = 1165 f ctd = 1165
K1 = (1+50r) K1 = (1+50r)
r = 0.00138 r = 0.00151
= 1.07 = 1.08
d = 0.438 d = 0.438
K2 = 1.6 -d = 1.162 K2 = 1.6 -d = 1.162
bw = 1.60 bw = 1.60

= 253.54 kN OK 254.99 kN OK
Step 3 - Design for Flexure

715.6

379.0

Critical Section For Moment

Critical Section From Edge of Footing is = 0.55 Y-dre.

0.6 X-dre.
Moment At Critical Section is = 82.7820558 kN - m/m Y-dre.
98.5174879 kN - m/m X-dre.

Calculate Reinforcement

1  2 mR n  f M
r req  1 - 1 -  m 
yd
R n  u
2
m  f yd  ; f ; bd
cd

C= 30
f cd = 13600.000 Kpa
S= 400.000
f yd = 347826.09 Kpa
d = 0.438 m
b = 1.00 m

m = 25.58
Rn = 431.51 long
513.53 short

= 0.0012609 long
0.0015054 short
Y-dre. As = 0.00055 = 4.883 Dia 12 bars
X-dre. As = 0.00066 = 5.830 Dia 12 bars
Y-dre. Use f 12 @ 200
Use f 12 @ 204.782

X-dre. Use f 12 @ 150

Use f 12 @ 171.527