SAVEMA TECHNICAL TRAINING SEMINAR
Online via Microsoft Teams | 30.04.2025 – 03.06.2025 | Türkiye Time (UTC+3)
Dear Customers,
We are pleased to announce that our training seminar will be conducted online via Microsoft Teams,
commencing on 30/04/2025, with the participation of our valued guests. Seminar will be finished on
03/06/2025.
You can find the seminar details in the program below. We look forward to your participation on the
most convenient date for you.
Due to time zone differences between countries, the same training content will be repeated on the
same day and the other day. The training sessions will cover the same material and ensure that all
participants, regardless of their location, will have access to the same training experience.
You can attend the sessions at a time that suits you based on your time zone.
The training seminar will be held according to Türkiye time (UTC+3).
SOFTWARE MECHANICS ELECTRONICS
• Sayasis S20 • Mechanical Parts • Control and Settings
• Software Details • TPH Gap and Angle • Parameters
• Problem Solutions • Problem Solutions • Problem Solution
AAAAARECEP SAVAK OMER OZEN AHMET YAGBASAN
AAAAASAKIR CICEKCI EROL KAHVECI ADIL ALADAG
AAAAASADI YILMAZ BERAT AKCAKAYA BAHA FURKAN TUNC
Location : Savema Marking and Coding Machines Factory
Büyükkayacık Organize Sanayi Bölgesi Kuddusi Caddesi No:4 SELÇUKLU / KONYA
Phone: +90 332 239 23 39 | Fax: +90 332 239 23 19 | Internet Page: www.Savema.com.tr
SOFTWARE SEMINAR DETAILS
30/04/2025 - 21/05/2025
TIME PLAN
09:00-09:45 1)INFORMATION AND EXPLANATION ABOUT SOFTWARE AND SCREEN PARTS
& 2)GENERAL INFORMATION ABOUT SAYASIS S20 INSTALLATION AND USAGE
16:00-16:45 3)INTRODUCTION AND USE OF ALL OBJECTS
09:45-10:00
& BREAK
16:45-17:00
1) CREATING DETAILED TEMPLATES USING S20
10:00-10:45 2) SAVING THE CREATED TEMPLATE AND TRANSFERRING IT TO THE PRINTER
& SCREEN VIA USB
17:00-17:45 3)GENERAL INFORMATION & PRACTICAL DEMONSTRATION ABOUT NETWORK USAGE
4) HOW TO INSTALL FONTS
10:45–11:00
& BREAK
17:45-18:00
11:00–11:45 1) TRANSFERRING THE TEMPLATE TO THE PRINTER SCREEN USING THE NETWORK
& 2) USING VNC
18:00-18:45 3) PRINTER SCREEN USAGE, MENUS EXPLANATION DATE TIME & OFFSET SETTINGS
11:45-12:00
& BREAK
18:45-19:00
1) EDIT MENU EXPLANATION
12:00-13:00 2) DETAILED EXPLANATION OF RS232 AND NETWORK SETTINGS
& 3) WHAT CAN BE DONE FROM THE AUTHORIZATION MENU
19:00-20:00 4) HOW TO DO A SYSTEM UPDATE
5) HOW TO FORMAT AND IN WHAT CASES IS IT NECESSARY
NOTE: Seminar will be in English Language. Seminar in Turkey Standard Time (UTC+3)
SOFTWARE TRAINING - 1 LESSON MORNING – 30/04/2025 - 09:00 (UTC+3)
Link: https://teams.live.com/meet/9329625062395?p=VP16VmpvL4snsi1M1p
SOFTWARE TRAINING - 2 LESSON EVENING – 30/04/2025 - 16:00 (UTC+3)
Link: https://teams.live.com/meet/9390411801649?p=ITHV2jFzsEOXkFGT9s
SOFTWARE TRAINING - 3 LESSON MORNING – 21/05/2025 - 09:00 (UTC+3)
Link: https://teams.live.com/meet/932623595075?p=n8pylQ1GoSzO3vfRry
SOFTWARE TRAINING - 4 LESSON EVENING – 21/05/2025 - 16:00 (UTC+3)
Link: https://teams.live.com/meet/9341052711892?p=eFGgRKl0hGnFXglV4E
ELECTRONIC SEMINAR DETAILS
08/05/2025 - 28/05/2025
TIME PLAN
09:00-09:45 1) GIVING STREAM INFORMATION EXPLAINING PRESENTATION
& 2) HOW TO INSTALL TTO(SENSOR AND ELECTRICAL CONNECTION(CONTACT1,
16:00-16:45 CONTACT2 CONNECTION AND FAULT BUSY RELAY CHECKING))
09:45-10:00
& BREAK
16:45-17:00
1) HOW TO REACH SETTINGS, MENTION OF GENERAL FEATURES SPEED DELAY ETC.
10:00-10:45 2) ABOUT CONTROL MENU
& 3) BASIC PARAMETER NEED(RESIN RIBON AND PRINTER SPEED MODE AND
17:00-17:45 PARAMETERS DIFFERENCE SCREEN AND MAINBOARD)
4) HOW TO CHECK ENCODER DIRECTION
5) HOW TO CHANGE MAINBOARD
10:45–11:00
& BREAK
17:45-18:00
11:00–11:45 1) GENERAL INFORMATION KNOWN TO BE TRUE BUT INCORRECT
& 2) GENERAL BOARD INFORMATION
18:00-18:45 3) HOW TO CHANGE MOTOR DRIVER
4) SOME SIMPLE MALFUNCTIONS (RIBBON BRAKE, FAKE RIBBON BRAKE)
11:45-12:00
& BREAK
18:45-19:00
1) HOW TO CHECK TPH CABLE- HOW TO CHANGE TPH CABL
12:00-13:00 2) HOW TO SOLVE TPH ERROR
& 3) HOW TO SOLVE COMMUNICATION PROBLEM
19:00-20:00 4) HOW TO SOLVE MAINBOARD FUSE BROKEN
5) HOW TO MEASURE VOLTAGE OF SCREEN 7 INC
NOTE: Seminar will be in English Language. Seminar in Turkey Standard Time (UTC+3)
ELECTRONIC TRAINING - 1 LESSON MORNING – 08/05/2025 - 09:00 (UTC+3)
Link: https://teams.live.com/meet/9393938803467?p=tOzR1sifR73vcUHBQ8
ELECTRONIC TRAINING - 2 LESSON EVENING – 08/05/2025 - 16:00 (UTC+3)
Link: https://teams.live.com/meet/9383823971403?p=woQepPo9RNEGFejsYr
ELECTRONIC TRAINING - 3 LESSON MORNING – 28/05/2025 - 09:00 (UTC+3)
Link: https://teams.live.com/meet/9316348990301?p=ofbe77FaBAmdAoimXG
ELECTRONIC TRAINING - 4 LESSON EVENING – 28/05/2025 - 16:00 (UTC+3)
Link: https://teams.live.com/meet/9383789760703?p=PK5npEnXWi1UtzqX4F
MECHANICAL SEMINAR DETAILS
14/05/2025 - 03/06/2025
TIME PLAN
1) MECHANICAL PARTS INFORMATION AND EXPLAINING THERMAL PRINTERS
09:00-09:45 2) BRACKET PARTS INFORMATION AND INSTALLATION
& 3) PRINT QUALITY (TPH GAP ADJUST-AIR PRESSURE-RIBBON TENSION)
16:00-16:45 4) CHANGING TPH AND TPH ANGLE
5) CHANGING VALVES
09:45-10:00
& BREAK
16:45-17:00
1) CHANGING RUBBER ROLLER
10:00-10:45 2) SENSOR GAP AND ADJUSTMENT
& 3) PISTON AND LINER BEARING CHANGE
17:00-17:45 4) FAKE RIBBON BROKEN
5) GENERAL MAINTENANCE
10:45–11:00
& BREAK
17:45-18:00
1) DISPENSER PARTS INFORMATION AND EXPLAINING
2) HOW TO DETERMINE THE DISPENSER DIRECTION
3) HOW TO PUT LABEL?
4) HORIZONTAL MOVEMENT MECH ASSEMBLY
11:00–11:45 5) DISPENSER ROTATION ADJUSTMENT AND SCRAPER SHEET ADJUSTMENT
& 6) HOW TO ADJUST AND CHANGE BREAKING SYSTEM?
18:00-18:45 7) HOW TO ADJUST PRESSURE MECHANISM?
8) HOW TO CHANGE THE SPONGE AND BELTS?
9) HOW TO CHANGE ROTATIONAL SCREEN?
11:45-12:00
& BREAK
18:45-19:00
1) FEEDER AND CONVEYORS INFORMATION AND EXPLAINING
2) HOW TO ADJUST FEEDER TO DIFFERENT PACKAGES?
3) HOW TO CHANGE BELT FOR FEEDER?
12:00-13:00 4) HOW TO CHECK AND CHANGE PISTONS ON VACUUM FEEDER?
& 5) AIR SCHEMA FOR VACUUM FEEDER
19:00-20:00 6) HOW TO ADJUST TPH GAP AND TPH ANGLE ON CONVEYORS?
7) HOW TO CHANGE BEARING ON CONV BAND?
8) HOW TO CHANGE BELT ON CONVEYORS?
9) SYNCHRONOUS OPERATION OF FEEDER AND CONVEYOR
NOTE: Seminar will be in English Language. Seminar in Turkey Standard Time (UTC+3)
MECHANICAL TRAINING - 1 LESSON MORNING – 14/05/2025 - 09:00 (UTC+3)
Link: https://teams.live.com/meet/9312918557203?p=7HJa8VTaQ9uZfG8ppu
MECHANICAL TRAINING - 2 LESSON EVENING – 14/05/2025 - 16:00 (UTC+3)
Link: https://teams.live.com/meet/931153056271?p=Hc2VtF4hr41rpVHGwJ
MECHANICAL TRAINING - 3 LESSON MORNING – 03/06/2025 - 09:00 (UTC+3)
Link: https://teams.live.com/meet/9358835160369?p=nmdisvzZ7OBQYU69MU
MECHANICAL TRAINING - 4 LESSON EVENING – 03/06/2025 - 16:00 (UTC+3)
Link: https://teams.live.com/meet/9362750392251?p=wBV3H7JS4wRBXCxEd4
