Application Notes
1.28 Wireless Key Programming (PC1616/1832/1864 V4.2)
Receivers:
RF5108-433, RF5132-433, RFK55XX-433 V1.0
Panels:
POWER SERIES (PC1616/1832/1864 V4.2)
Overview:
Program the wireless keys is a three-step process:
- Program the wireless key serial number(s)
- Program the wireless key options (Optional)
- Assign the wireless key to a partition (Optional)
Program Sections:
Section [804], subsection [41] – [56] Wireless Key Serial Numbers
Section [804], subsection [61] – [68] Wireless Key Options (Optional)
Section [804], subsection [69] Wireless Key Partition Assignment (Optional)
Step 1 – Program Wireless Key Serial Number(s)
Up to sixteen wireless keys can be enrolled. Program the serial number (ESN) of the first wireless key in
Section [804], subsection [41], the next in subsection [42], etc.
Step 2 (Optional) –Wireless Key Options
There are four programmable function buttons on each wireless key. Program the operation of the four
buttons for Partition 1 wireless keys in Section [804], subsection [61]. Program the operation of the four
buttons for Partition 2 wireless keys in Section [804], subsection [62].
Note: The operation of the four buttons on all wireless keys assigned to a partition will be the
same.
Step 3 (Optional) – Wireless Key Partition Assignment
At default all wireless keys are programmed to operate Partition 1. To program a wireless key to operate in
other partitions, enter the partition number in Section [804], subsection [69].
Technical Tips:
1. Quick Arming must be enabled for the wireless key Stay and Away arm function to operate.
Ensure option [4] is ON in Section [015] of the main control panel.
Quick Test:
Use the wireless key(s) to arm and disarm the control panel.
• Page 62 •
