Amplifiers
Model 1000W1000H The Model 1000W1000H is a solid-state, The export classification for this
Class A design, self-contained, air- equipment is EAR99. These
Features: commodities, technology or software
cooled, broadband power amplifier
designed for applications where are controlled for export in
• 1200 W typical CW, 80 - 1000
instantaneous bandwidth, high gain accordance with the U.S. Export
MHz
and linearity are required. It will Administration Regulations. Diversion
• Class A design
provide a typical of 1200 W across its contrary to U.S. law is prohibited.
• 100% mismatch tolerant
operating bandwidth of 80 - 1000 MHz.
• Built-in fault monitoring, logging
Protection from input overdrive beyond
and protection
0 dBm is provided as well as protection
• Touch screen display
from various failure conditions including
• Forward and reverse power
over-temperature and power supply
monitoring
faults.
• VSWR monitor with user settable
limit A front panel display indicates the
• User settable ALC operational status and fault
• Remote control: Ethernet, USB, conditions. All amplifier control
GPIB, fiber-optic serial, RS-232 functions, and status indications are
• Modular design for easy available remotely using GPIB/IEEE-488,
maintenance and service RS-232, fiber-optic serial, USB, or
• Low acoustical noise Ethernet. Interface connectors are
located on the back panel. Local and
Applications: remote operation is managed by a
switch on the front panel.
• EMC (military, aviation,
automotive, commercial) This is a multiple purpose amplifier. The
• Radiated and conducted EMC low level of spurious signals and
testing linearity make it ideal for use as a driver
• General purpose, antenna, and in testing wireless and communication
component testing components and subsystems. By
covering such a wide bandwidth, it is
To view our full amplifier portfolio suitable for 5G testing applications.
visit: www.arworld.us/amplifiers Due to the Class A design, it is also
suitable for EMC Test applications
AR RF/Microwave Instrumentation
where continued operation into high
160 Schoolhouse Rd VSWR loads including open and short
Souderton, PA 18964 circuits is required.
215.723.8181
[email protected]
www.arworld.us
ISO 9001:2015 Certified
ISO 17025 :2017 Accredited
1
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
Electrical Specifications
Parameter Symbol Minimum Typical Maximum Unit
Rated Power Output (80 – 650 MHz) PSAT 1100 1250 >1400 W
Rated Power Output (650 - 1000 MHz) PSAT 1000 1100 >1200 W
1 mW
Input for Rated Output Pin
0 dBm
Power Output @ 3dB Compression (80 – 650 MHz) P3dB 1100 1250 >1400 W
Power Output @ 3dB Compression (650 – 1000 MHz) P3dB 1000 1100 >1200 W
Power Output @ 1dB Compression (80 – 650 MHz) P1dB 1050 1150 >1200 W
Power Output @ 1dB Compression (650 – 1000 MHz) P1dB 950 1000 >1100 W
Operating Frequency BW 80 1000 MHz
Gain (Small Signal) 62 65 66 dB
Gain Reduction Adjustment (when below gain
20 22 55 dB
compression)
Flatness @ small signal ∆G ±1.5 ±2.0 dB
50 Ohm
Input Impedance Z in
1.3:1 1.5:1 VSWR
Output Impedance Z out 50 Ohm
3rd Order Intercept IP3 +66 dBm
Noise Figure NF 6 8 dB
Harmonic Distortion @ 1000 W H2, H3 -40 -20 dBc
Spurious -73 dBc
Power Consumption PD 3750 W
Modulation Capability AM, FM or Pulse
Absolute Maximum Rating
Exceeding any of the limits listed here may result in permanent damage to the device.
Parameter Minimum Typical Maximum Unit
RF Drive 0 +13 dBm
RF Load 1:1 ∞ VSWR
RF Load Reflected
Will operate without damage or oscillation when connected to any 100 %
load impedance without the aid of foldback circuitry.
AC Power (single phase) 200 240 VAC
AC Power 47 63 Hz
Ambient Temperature +5 +25 +40 °C
Storage Temperature -20 +50 °C
Altitude 1000 m
Shock/Vibration Normal Truck Transport
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964 • 215-723-8181 • [email protected] • www.arworld.us • ISO 9001:2015 Certified • ISO 17025:2017 Accredited
2
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
Mechanical Specifications
Parameters Typical Unit
Dimensions (26U Rack) (W x H x D) 57.3 x 136.0 x 67.1 cm
22.6 x 53.5 x 26.5 in
Weight 156 kg
343 lb
Cooling Forced air (self-contained fans)
Side inlets / rear outlet Δt = +7°C (typical)
Acoustical Noise (Measured @ 1 meter from the front) 64 (typical) dBA
Regulatory Compliance
Type Standard
EMC EN 61326-1
Safety UL 61010-1
CAN/CSA C22.2 #61010-1
CENELEC EN 61010-1
RoHS Directive 2011/65/EU
Export EAR99
Connector interfaces
Function Type
RF input N female (50 Ω), rear
RF output 7-16 DIN female (50 Ω), rear
RF sample N female (50 Ω), rear (60dB typical)
IEEE-488 24-pin
RS-232 9-pin subminiature D female
RS-232 (fiber optic) ST
USB 2.0 Type B
Ethernet RJ-45
Interlock 15-pin subminiature D female
AC Input 5-meter harmonized power cord supplied with
amplifier. The power cord is left open-ended to
allow for facility power connection of user’s
choice.
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964 • 215-723-8181 • [email protected] • www.arworld.us • ISO 9001:2015 Certified • ISO 17025:2017 Accredited
3
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
Ordering Options
1000W1000H - - N - R - 716 -
RF
RF IN Conn RF OUT Conn
Model Sample
Location, Type Location, Type
Ports
Connector Location RF Sample Ports
Front F Front SPF
Rear R Rear SPR
Contact your AR RF/Microwave Instrumentation Sales Associate for specific model configuration pricing.
Envelope Drawing
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964 • 215-723-8181 • [email protected] • www.arworld.us • ISO 9001:2015 Certified • ISO 17025:2017 Accredited
4
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
TYPICAL PSAT POWER @ 0 dBm INPUT
TYPICAL POWER @ P3 dB COMPRESSION
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964 • 215-723-8181 • [email protected] • www.arworld.us • ISO 9001:2015 Certified • ISO 17025:2017 Accredited
5
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
TYPICAL POWER @ P1dB COMPRESSION
TYPICAL SMALL SIGNAL GAIN @ -20 dBm INPUT
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964 • 215-723-8181 • [email protected] • www.arworld.us • ISO 9001:2015 Certified • ISO 17025:2017 Accredited
6
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
TYPICAL 2nd HARMONICS @ 1000 W
TYPICAL 3rd HARMONICS @ 1000 W
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964 • 215-723-8181 • [email protected] • www.arworld.us • ISO 9001:2015 Certified • ISO 17025:2017 Accredited
7
Model 1000W1000H
• 1150 W, 80 - 650 MHz
• 1000 W, 650-1000 MHz
TYPICAL INPUT VSWR
TYPICAL NOISE FIGURE
7.5
6.5
Noise Figure (dB)
5.5
4.5
3.5
Freq (MHz)
AR RF/Microwave Instrumentation • 160 Schoolhouse Rd, Souderton, PA 18964
To order AR Products, call: 215.723.8181. For an applications engineer, call: 800.933.8181. Direct to Service call: 215.723.0275 or email:
[email protected] For Faxing Orders: 866.859.0582 (Orders Only Please)
[email protected]Approved for public release by AR RF/Microwave Instrumentation ISO 9001:2015 Certified • ISO 17025:2017 accredited Revision 021623
