NAME:

SECTION:
INSTRUCTOR:

ENCIRCLE THE CORRECT ANSWER.

1. What is the purpose of familiarizing yourself with the parts of a vernier caliper before use? A. To check
for worn-out blades
B. To ensure accurate measurements
C. To increase the size of the object being measured
D. To lubricate the caliper

2. Why should you align your eye with the measurement on a vernier caliper? A. To clean the measuring
surface
B. To avoid parallax errors
C. To apply gentle pressure
D. To calibrate the scale

3. What is the first step before using a vernier caliper? A. Lubricate the jaws
B. Check the object’s dimensions
C. Ensure the caliper has no damage or wear
D. Lock the sliding scale

4. Why should you rotate the ratchet knob instead of the thimble when using a micrometer? A. To
measure larger objects
B. To prevent overtightening and inaccurate readings
C. To clean the measuring surface
D. To increase the size of the object
5. What should you do if the micrometer’s zero mark doesn’t align when closed? A. Lubricate the
micrometer
B. Clean the object being measured
C. Calibrate the micrometer
D. Rotate the ratchet knob further
6. Why is it important to use the thimble lock while the micrometer is holding the object? A. To clean the
spindle
B. To prevent movement during reading
C. To tighten the object further
D. To measure larger objects
7. What is the main purpose of a filler gauge? A. To measure voltage
B. To measure the gap or clearance
C. To draw arcs or circles
D. To check for object alignment

8. What should you check for before using a filler gauge? A. Bent arms or dull points
B. Rusted edges or worn-out blades
 C. Alignment of the compass
D. Clean measuring surfaces

9. How should you measure with a filler gauge to avoid damage? A. Apply excessive force
B. Use the largest blade available
C. Select the correct blade size and avoid forcing it
D. Dip the blade into oil before use

10. Why should you check the edge of a steel ruler before using it for measurement? A. To ensure it is free
from dust, bends, or rust
B. To prevent sharp edges from cutting
C. To make it easier to draw straight lines
D. To align it with the object

11. What is the best way to prevent movement when using a steel ruler for measurement? A. Hold it with
both hands
B. Keep the edge clean
C. Firmly hold it in one hand while marking with the other
D. Lubricate the ruler

12. Why should you avoid using a ruler as a cut edge? A. It could damage the ruler or the work surface
B. It will make measuring difficult
C. It will reduce the accuracy of the ruler
D. It will increase the chance of slipping

13. What is the first thing to check before using a compass divider? A. The sharpness of the pencil
B. The condition of the points and joints
C. The alignment of the arms
D. The tightness of the locking screw

14. Why should you hold the compass divider by the central hub? A. To prevent slipping on the surface
B. To avoid touching the sharp points
C. To adjust the measurement accurately
D. To avoid overextending the legs

15. What is the best surface to work on when using a compass divider for accurate measurements? A. A
slanted surface
B. A clean and flat surface
C. A soft, uneven surface
D. A rough and textured surface

16. Why is it important to calibrate the torque wrench before use? A. To avoid damaging the fastener
B. To reduce friction between components
C. To apply more torque
D. To prevent the tool from slipping
17. What could happen if a torque wrench is not used correctly? A. The object may not fit properly
B. The fastener may become loose or overtightened
C. The measuring surface will be scratched
D. The jaws will not align

18. Why should the flywheel locking tool be used when working on engine parts? A. To increase flywheel
rotation
B. To ensure the flywheel stays in place
C. To lock the crankshaft
D. To reduce engine noise
19. What is the main function of the valve seat grinding tool? A. To polish the valve
B. To grind valve seats for proper alignment
C. To measure the valve clearance
D. To clean carbon deposits

20. Why is smooth grinding essential when using a valve seat grinding tool? A. To avoid damaging the
crankshaft
B. To achieve proper valve seating and combustion efficiency
C. To ensure the flywheel does not move
D. To prevent oil leaks
21. What is the main purpose of a piston ring compressor? A. To measure the piston diameter
B. To compress the piston rings for easier insertion into the cylinder
C. To check for piston wear
D. To apply lubricant to the piston rings

22. Why should you coat the piston ring compressor with oil before use? A. To reduce friction and ease the
piston insertion
B. To clean the cylinder
C. To prevent rust on the compressor
D. To protect the piston rings from wear
23. What is the primary function of a crankshaft deflection gauge? A. To check for oil leaks
B. To measure crankshaft deflection for proper positioning
C. To determine the piston size
D. To ensure the flywheel stays in place

24. Why is it important to handle a crankshaft deflection gauge with care? A. To avoid damaging the
cylinder
B. To ensure accurate deflection readings
C. To reduce piston ring wear
D. To prevent engine overheating
25. What is the primary role of an injector puller? A. To clean fuel injectors
B. To safely remove fuel injectors from the cylinder head
C. To tighten injector fittings
D. To measure fuel pressure
26. Why is it important to use the injector puller as directed? A. To prevent over-tightening the injectors
B. To avoid damaging the injector or cylinder head
C. To ensure fuel pressure is maintained
D. To clean the fuel lines

27. How does using the correct blade size on a feeler gauge ensure accurate measurements? A. It allows
the user to apply more force
B. It ensures the blade fits into the gap without forcing it
C. It helps align the caliper
D. It prevents the tool from slipping

28. Why should the feeler gauge blades be checked for wear or rust before use? A. To ensure proper
lubrication of the blades
B. To avoid inaccurate readings and prevent damage
C. To clean the measuring surfaces
D. To calibrate the gauge

29. Why should the locking lever be unlocked before rotating the thimble or ratchet knob on a micrometer?
A. To prevent damage to the micrometer’s calibration
B. To ensure accurate alignment of the object
C. To measure the distance accurately
D. To avoid damaging the spindle

30. What could happen if you overtighten the thimble on a micrometer while measuring? A. It could provide
a more accurate reading
B. It could damage the object being measured and give a wrong reading
C. It could clean the micrometer's scale
D. It could increase the life of the micrometer

1. Which tool is commonly used to measure the air pressure in an air compressor tank?
A) Caliper
B) Pressure gauge
C) Feeler gauge
D) Tachometer
2. What tool is necessary to safely release pressure from an air compressor?
A) Bleeder valve
B) Torque wrench
C) Caliper
D) Impact driver
3. Which tool is used to check the oil temperature in a purifier?
 A) Thermometer
B) Pressure gauge
C) Caliper
D) Feeler gauge
4. Which tool measures the speed of a rotating air compressor component?
A) Tachometer
B) Torque wrench
C) Dial gauge
D) Caliper
5. Which tool is used to align pulleys in belt-driven air compressors?
A) Straight edge
B) Micrometer
C) Feeler gauge
D) Caliper

Why would a technician use a feeler gauge on an air compressor?

A) To measure oil level
B) To check clearance between parts
C) To test for air leaks
D) To clean components
6. What is the primary purpose of a torque wrench when working with compressor parts?
A) To tighten bolts to specific tension
B) To measure the size of parts
C) To clean rusted bolts
D) To disassemble components
7. What is the purpose of using a stethoscope on an air compressor?
A) To detect unusual sounds or vibrations
B) To measure rotational speed
C) To monitor air pressure
D) To release excess air
8. Why is a dial indicator essential in purifier maintenance?
A) To check shaft alignment
B) To test oil quality
C) To release pressure
D) To remove seals
9. Why would a technician use soapy water in air compressor maintenance?
A) To test for air leaks
B) To lubricate parts
C) To measure pressure
D) To clean metal surfaces
11. If a technician needs to remove rust from an air compressor part, which tool should they use?
A) Wire brush
B) Micrometer
C) Tachometer
D) Feeler gauge
12. Which tool should a technician use to tighten purifier bolts accurately?
A) Torque wrench
B) Caliper
C) Tachometer
D) Feeler gauge
13. A technician uses a bore gauge to measure which part of a purifier?
A) Bolt tightness
B) Internal diameter
C) Pressure levels
D) Oil quality
14. A technician needs to remove a seal from a purifier component. Which tool should they use?
A) Seal puller
B) Feeler gauge
C) Tachometer
D) Caliper
15. What tool is suitable for measuring the thickness of compressor components?
A) Micrometer
B) Thermometer
C) Stethoscope
D) Multimeter

16. A compressor is making unusual noise. What should the technician use to locate the noise source?
A) Stethoscope
B) Caliper
C) Feeler gauge
 D) Dial indicator
17. If a purifier bowl shows misalignment, which tool can diagnose this issue?
A) Dial indicator
B) Feeler gauge
C) Tachometer
D) Torque wrench
18. An air compressor is leaking air. Which tool and method combination would be most effective for
diagnosis?
A) Soapy water spray to identify leaks
B) Thermometer for temperature check
C) Feeler gauge to measure gap sizes
D) Caliper to measure diameter
19. Which tool is best to measure and ensure exact spacing between purifier parts?
A) Feeler gauge
B) Tachometer
C) Pressure gauge
D) Seal puller
20. A purifier’s rotation speed seems inconsistent. Which tool would best verify this?
A) Tachometer
B) Stethoscope
C) Multimeter
D) Caliper
21. When replacing a gasket, why might a seal puller be chosen over manual methods?
A) It removes gaskets more precisely and safely
B) It measures thickness accurately
C) It applies pressure evenly
D) It cleans surfaces thoroughly
22. For measuring small tolerances on purifier parts, which tool would be the most accurate?
A) Micrometer
B) Caliper
C) Pressure gauge
D) Torque wrench
23. Why is a torque wrench preferred over a regular wrench when working with sensitive air compressor
parts?
A) It applies a consistent amount of force
B) It’s faster to use
 C) It’s more affordable
D) It helps with measuring diameter
24. Why might a technician choose a bore gauge instead of a caliper for checking purifier internal
diameters?
A) It provides more accurate internal diameter measurements
B) It is simpler to use
C) It requires less maintenance
D) It is a multi-purpose tool
25. For testing alignment in a purifier, which tool would yield the best results?
A) Dial indicator for high precision
B) Thermometer to monitor heat
C) Micrometer for depth
D) Wire brush for cleaning
26. Design a basic checklist for testing an air compressor’s efficiency. Which tools would you include?
A) Soapy water spray, pressure gauge, tachometer
B) Dial indicator, caliper, stethoscope
C) Feeler gauge, thermometer, bore gauge
D) Multimeter, inspection mirror, seal puller
27. Create a purifier maintenance plan. Which three tools are essential and why?
A) Torque wrench for bolt tension, dial indicator for alignment, inspection mirror for visibility
B) Caliper for diameter, screwdriver for assembly, thermometer for temperature
C) Feeler gauge for clearance, tachometer for speed, multimeter for current
D) Hammer for impact, tachometer for vibration, ruler for alignment
28. A technician needs to ensure precise alignment of a newly installed air compressor. Which tools are
essential?
A) Laser alignment tool and straight edge for exact alignment
B) Caliper and ruler for spacing
C) Micrometer and seal puller
D) Pressure gauge and multimeter
29. Design a maintenance kit for regular purifier inspections. What should it contain?
A) Stethoscope for noise detection, thermometer for temperature, feeler gauge for gaps
B) Screwdriver, hammer, and ruler
C) Feeler gauge, dial indicator, torque wrench
D) Thermometer, micrometer, wire brush
30. Plan an inspection sequence for an air compressor showing low pressure. Which tools would you
include?
A) Pressure gauge to verify pressure, soapy water spray for leaks, tachometer for speed
B) Caliper, wire brush, torque wrench
C) Dial indicator, bore gauge, thermometer
D) Feeler gauge, inspection mirror, stethoscope