In the following circuit :
To increase the bandwidth to double and increase(𝝎𝒓 ) four times we
must :
1) close key ………
A) 1 B)2
2) and move the arm from branch (a) to branch :
A) a B) b C) c D) d
A series resonance circuit that has a capacitor of 𝟏𝟎𝟎 𝒏𝑭 and source
voltage 𝑬 = 𝟐 phase 𝟎 volts and an actual coil of quality 𝑸 = 𝟐𝟎𝟎
and it produces the following response graph
3) The value of coil resistance (𝑹𝒍 ) :
A) 𝟎. 𝟏𝟓𝟖𝟑𝜴 B) 𝟎. 𝟗𝟗𝟓𝜴 C) 𝟑𝟗. 𝟐𝟕𝜴 D) 𝟔. 𝟐𝟓𝜴
4) The value of the load (𝑹) :
A) 𝟏𝟐. 𝟑𝟑𝟖 𝛀 B) 𝟏𝟑. 𝟏𝟕𝟓 𝛀 C) 𝟐𝟓. 𝟗𝟑𝟕 𝛀 D) 𝟕. 𝟎𝟖𝟑𝛀
5) Self inductance of the coil (𝑳) :
A) 𝟑. 𝟗𝟓𝟖 𝒎𝑯 B) 𝟏𝟓𝟔. 𝟐𝟓 𝒎𝑯 C) 𝟏𝟓𝟔. 𝟐𝟓 𝝁𝑯 D) 𝟑. 𝟗𝟓𝟖 𝝁𝑯
6) The circuit quality (𝑸𝒔 ) :
A) 200 B) 2.375 C) 14.922 D) 93.75
7) Find VL and Vc @ Resonance :
A) 𝟐𝟖. 𝟖𝟒𝟒 𝒔𝒊𝒏(𝝎𝒕 + 𝟗𝟎) 𝒂𝒏𝒅 𝟐𝟖. 𝟖𝟒𝟒 𝒔𝒊𝒏(𝝎𝒕 − 𝟗𝟎)
B) 𝟐𝟖. 𝟖𝟒𝟒 𝒔𝒊𝒏(𝝎𝒕 − 𝟗𝟎) 𝒂𝒏𝒅 𝟐𝟖. 𝟖𝟒𝟒 𝒔𝒊𝒏(𝝎𝒕 + 𝟗𝟎)
C) 𝟒. 𝟕𝟓 𝒔𝒊𝒏(𝝎𝒕 + 𝟗𝟎) 𝒂𝒏𝒅 𝟒. 𝟕𝟓 𝒔𝒊𝒏(𝝎𝒕 − 𝟗𝟎)
D) 𝟒. 𝟕𝟓 𝒔𝒊𝒏(𝝎𝒕 − 𝟗𝟎) 𝒂𝒏𝒅 𝟒. 𝟕𝟓𝒔𝒊𝒏(𝝎𝒕 + 𝟗𝟎)
7) Find VL and Vc @ frequency 10% below resonance :
A) 𝟖. 𝟖𝟗𝟐 𝒔𝒊𝒏(𝝎𝒕 + 𝟏𝟗. 𝟑𝟑𝟒) 𝒂𝒏𝒅 𝟏𝟎. 𝟗𝟕𝟖 𝒔𝒊𝒏(𝝎𝒕 − 𝟏𝟔𝟎. 𝟔𝟕)
B) 𝟖. 𝟏𝟑 𝒔𝒊𝒏(𝝎𝒕 + 𝟏𝟔𝟐. 𝟑𝟖) 𝒂𝒏𝒅 𝟏𝟎. 𝟎𝟑𝟕 𝒔𝒊𝒏(𝝎𝒕 − 𝟏𝟕. 𝟔𝟐)
C) 𝟗. 𝟎𝟑𝟒 𝒔𝒊𝒏(𝝎𝒕 + 𝟏𝟔𝟐. 𝟑𝟖) 𝒂𝒏𝒅 𝟗. 𝟎𝟑𝟑 𝒔𝒊𝒏(𝝎𝒕 − 𝟏𝟕. 𝟔𝟐)
D) None
In the following circuit :
If 𝝎𝒑 = 𝟏𝟐. 𝟓 𝒓𝒂𝒅/𝒔 𝑹𝑺 = 𝟐𝟎𝟎 𝛀 𝑹𝑳 = 𝟎. 𝟓 𝛀
8) The value of 𝑹𝑪 :
A) 𝟑 𝛀 B) 𝟔 𝛀 C) 𝟗 𝛀 D) 𝟑𝟔 𝛀
For the following circuit :
If the output voltage is 1V
9) Find equivalent resistance (𝑹) :
A) 𝟑𝟐𝟖𝟎 𝛀 B) 𝟕𝟕𝟒 𝛀 C) 𝟑𝟎𝟑𝟏. 𝟒𝟐 𝛀 D)𝟏𝟎𝟏𝟒. 𝟐𝛀
10) Calculate resonance frequency (𝒇𝒑 ) :
A) 𝟓𝟎𝟎𝟎𝟎 𝑯𝒛 B) 𝟕𝟑𝟕𝟓. 𝟔𝟓 𝑯𝒛
C) 𝟏𝟐𝟔𝟔. 𝟓 𝑯𝒛 D) 𝟑𝟏𝟒𝟏𝟓𝟗. 𝟐𝟕 𝑯𝒛
11) The circuit’s quality (𝑸𝑷 ) :
A) 15.16 B) 0.066 C) 16.4 D) 200
12) Band width (𝑩𝑾) :
A) 𝟐𝟓𝟎 𝑯𝒛 B) 𝟖𝟑. 𝟓𝟒 𝑯𝒛
C) 𝟒𝟖𝟓. 𝟐𝟐 𝑯𝒛 D) 𝟓𝟐𝟓 𝑯𝒛
13) circulating current IL @ 4% above resonance
A) 𝟑. 𝟎𝟔 𝒔𝒊𝒏(𝝎𝒕 − 𝟏𝟒𝟎. 𝟐𝟏) 𝒎𝑨
B) 𝟐. 𝟗𝟏 𝒔𝒊𝒏(𝝎𝒕 − 𝟏𝟒𝟐. 𝟒) 𝒎𝑨
C) 𝟑. 𝟏𝟖𝟏 𝒔𝒊𝒏(𝝎𝒕 − 𝟏𝟒𝟎) 𝒎𝑨
D) 𝟎. 𝟑 𝒔𝒊𝒏(𝝎𝒕 + 𝟑. 𝟓𝟖) 𝒎𝑨
14) circulating current IC @ 4% above resonance
A) 𝟑. 𝟏𝟖𝟏 𝒔𝒊𝒏(𝝎𝒕 − 𝟓𝟎. 𝟓) 𝒎𝑨
B) 𝟑. 𝟏𝟒 𝒔𝒊𝒏(𝝎𝒕 + 𝟑𝟕. 𝟏𝟓) 𝒎𝑨
C) 𝟑. 𝟑𝟏 𝒔𝒊𝒏(𝝎𝒕 + 𝟑𝟏. 𝟓𝟏) 𝒎𝑨
D) 𝟎. 𝟑𝟏 𝒔𝒊𝒏(𝝎𝒕 + 𝟑. 𝟓𝟖) 𝒎𝑨
For the circuit shown find :
15) 𝑰𝟏
A) 𝟔. 𝟐𝟐∠ − 𝟓𝟔. 𝟗 𝑨 B) 𝟓. 𝟏𝟏∠ − 𝟐𝟗. 𝟓𝟐 𝑨
C)𝟏. 𝟎𝟐𝟐∠𝟕𝟔. 𝟕𝟔 𝑨 D) 𝟔. 𝟐𝟐 ∠ − 𝟏𝟐𝟐. 𝟕 𝑨
16) 𝑰𝟐
A) 𝟏. 𝟎𝟐𝟐∠𝟕𝟔. 𝟕𝟔 𝑨 B)𝟔. 𝟐𝟐∠ − 𝟓𝟔. 𝟗 𝑨
C)𝟑𝟗. 𝟐𝟔∠𝟐𝟕. 𝟗 𝑨 D) 𝟏. 𝟎𝟐𝟐 ∠ − 𝟏𝟎𝟑. 𝟐𝟑𝟒 𝑨
17) 𝑽𝒐
A) 𝟓𝟓. 𝟔𝟑∠ − 𝟖𝟑. 𝟒𝟕 𝒗 B)𝟑𝟓𝟏. 𝟏𝟓∠𝟏. 𝟑𝟑𝟓 𝒗
C)𝟗. 𝟏𝟒∠ − 𝟏𝟐𝟗. 𝟖 𝒗 D) 𝟗. 𝟏𝟒 ∠𝟓𝟎. 𝟏𝟗 𝒗
18) Power in 𝒁𝒍 (𝑷𝒛𝒍 )
A) 𝟏𝟐𝟑𝟑𝟎. 𝟕𝟖 𝒘 B) 𝟖. 𝟑𝟓𝟔 𝒘
C) 𝟑𝟎𝟗. 𝟓𝟏 𝒘 D) 𝟑𝟑𝟗. 𝟔𝟕𝟓 𝒘
19) Power produced by source 𝑽 (𝑷𝒗 )
A) 𝟑𝟑𝟗. 𝟔𝟕𝟓 𝒘 B) 𝟒𝟒𝟒. 𝟔𝟔 𝒘
C) 𝟖. 𝟑𝟓𝟔 𝒘 D) 𝟐𝟒𝟎. 𝟎𝟑 𝒘
For the following circuit 𝑹𝒍 is set to obtain maximum power ,find :
20) Thevenin’s voltage between a and b :
A) 𝟑𝟐∠𝟎 𝒗 B) 40∠𝟎 𝒗 C) 𝟔𝟒∠𝟎 𝒗 D) 𝟏𝟔∠𝟎 𝒗
21) Norton’s current at 𝒁𝒐 : (between a and b )
A) 𝟏. 𝟐𝟓∠𝟎 𝑨 B) 1.5∠𝟎 𝑨 C) 𝟐. 𝟓∠𝟎 𝑨 D) 𝟔∠𝟎 𝑨
22) Maximum power delivered to 𝑹𝒍 :
A) 𝟐𝟓 𝒘 B) 𝟏𝟎 𝒘 C)𝟏𝟓 𝒘 D) 𝟐𝟎 𝒘
23) Power supplied by source 𝑷𝒔𝒕 :
A) 𝟐𝟒𝟎 𝒘 B) 𝟔𝟎 𝒘 C) 𝟐𝟎𝟎 𝒘 D) 𝟐𝟑𝟎 𝒘
24) Two circuits (𝑨)& (𝑩) as shown
Find 𝑪𝑨 = … … ….
A) 5C B) 4.5 C C) 2.5 C
D) C E) none
25) In RLC circuit if (L,C) have increased to the double and they
are in resonance .
𝑸𝒔 will ……………..
A) increase to double B) decrease to half
C) Increase to √𝟐 𝑸𝑺 D) don’t change
𝟏
E) decrease to 𝑸𝑺
√𝟐
26) Which values of (𝑹𝒍 , 𝑪 , 𝑳 , 𝑹𝒔 ) will make a possible resonance
circuit ? (You can chose more than one choice )
A) 𝑹𝒍 , = 𝟑𝟎 𝛀 , 𝑪 = 𝟑𝝁𝒇 , 𝑳 = 𝟐. 𝟕 𝒎𝑯
B) 𝑹𝒍 , = 𝟒𝟎 𝛀 , 𝑪 = 𝟖𝝁𝒇 , 𝑳 = 𝟎. 𝟒 𝒎𝑯
C) 𝑹𝒍 , = 𝟒𝟎 𝛀 , 𝑪 = 𝟑𝝁𝒇 , 𝑳 = 𝟏𝟓 𝒎𝑯
D) 𝑹𝒍 , = 𝟐𝟎 𝛀 , 𝑪 = 𝟐𝝁𝒇 , 𝑳 = 𝟎. 𝟎𝟓 𝒎𝑯
In the shown circuit ( 𝑸 < 𝟏𝟎 )
27) the resonance frequency depends on …………
A) ( 𝑳 , 𝑪 ) B) ( 𝑹 , 𝑳 ) C) ( 𝑳 , 𝑹𝒍 , 𝑪 ) D) All of the above
28) The bandwidth of 𝑽𝒐 depends on ……….+
A) (𝑹 , 𝑪 ) B) ( 𝑹 , 𝑳 ) C) ( 𝑳 , 𝑹𝒍 , 𝑪 ) D) All of the above
This filter produces the resonance curve below the circuit :
29) The value of 𝑳𝒑 :
A) 𝟏 𝝁𝑯 B) 𝟏 𝒎𝑯 C) 𝟐. 𝟓 𝒎𝑯 D) 𝟓 𝒎𝑯
30) The value of R :
A) 𝟏𝟏. 𝟏𝟏 𝛀 B) 𝟏𝟏. 𝟐𝟓 𝛀 C)𝟗𝟎𝟎 𝛀 D)𝟏𝟎𝟎𝛀
31) The values of the 2 element of 𝒁𝒔 :
A) 𝟏𝟏. 𝟐𝟓 𝛀 , 𝟓 𝐦𝐇 B) 𝟏𝟏. 𝟏𝟏 𝛀 , 𝟏 𝛍𝐇
C) 𝟏𝟏. 𝟐𝟓 𝛀 , 𝟏 𝒎𝑯 D) 𝟏𝟏. 𝟏𝟏 𝛀 , 𝟐. 𝟓 𝐦𝐇
32)When R is removed , what is the value 𝑽𝒐 at accepted frequency?
A) 90 V B) 89.89 V C) 10 V D) 0
33)Also, when R is removed , what is the value 𝑽𝒐 at rejected
frequency ?
A) 90 V B) 89.89 V C) 10 V D) 0
34) For this initial circuit |𝑿𝒍 | = 3|𝑿𝒄 | find the value of 𝑪𝟏 to be
added in series with C to make the circuit in resonance at the same
frequency :
A) 𝟏. 𝟓 𝝁𝑭 B) 𝟎. 𝟐𝟓 𝝁𝑭 C) 𝟎. 𝟏𝟔𝟔𝟕 𝝁𝑭 D) 𝟎. 𝟓 𝝁𝑭
(𝝎 = 𝟖𝟎𝟎 𝒓𝒂𝒅/𝒔)
𝒁𝒍 → (R series L) → [ 360 , 0.25 H]
𝑳𝟏 = 0.5 H 𝑳𝟐 =0.125 k =0.4
35) The reflected impedance ………….
A) 𝟏𝟎. 𝟐 ∠ − 𝟏𝟓. 𝟐𝟒 B) 𝟑𝟐. 𝟓∠𝟏𝟓. 𝟏
C) 𝟏𝟐. 𝟖∠ − 𝟑𝟔. 𝟖𝟕 D) 𝟏𝟒. 𝟒𝟑∠𝟑𝟐. 𝟑𝟑
36) 𝑰𝟏 =……………… A
A) 𝟎. 𝟎𝟕∠ − 𝟏𝟎. 𝟏𝟏 B) 𝟎. 𝟖𝟖∠ − 𝟏𝟏. 𝟏𝟐
C) 𝟎. 𝟓𝟐∠ − 𝟏𝟓. 𝟏𝟐 D) 𝟎. 𝟖𝟔𝟒𝟓𝟓∠ − 𝟗. 𝟏𝟓𝟖
37) 𝑰𝟐 =……………… A
A) 𝟎. 𝟒𝟒∠ − 𝟏𝟏. 𝟏𝟏 B) 𝟎. 𝟑𝟐𝟒∠ − 𝟔𝟐. 𝟐𝟗𝟓
C) 𝟎. 𝟏𝟓∠ − 𝟏𝟓. 𝟏 D) 𝟎. 𝟏𝟏𝟐∠ − 𝟔𝟓. 𝟏𝟖
38) 𝑰𝟑 =……………… A
A) 𝟎. 𝟔𝟐∠𝟏𝟑. 𝟎𝟏 B) 𝟎. 𝟓𝟓∠𝟏𝟖. 𝟏𝟏
C) 𝟎. 𝟕𝟕∠𝟏𝟑. 𝟏𝟏 D) 𝟎. 𝟏𝟕𝟖𝟒∠𝟏𝟐. 𝟎𝟏𝟔
39) 𝑰𝟒 =……………… A
A) 𝟎. 𝟎𝟔𝟗𝟏∠𝟏𝟑. 𝟗 B) 𝟎. 𝟎𝟕𝟏𝟏∠𝟏𝟐. 𝟎𝟏
C) 𝟎. 𝟎𝟔𝟐𝟖𝟗∠𝟏𝟑. 𝟔𝟖𝟕 D) 𝟎. 𝟎𝟖𝟐∠𝟏𝟑. 𝟏𝟐
40) 𝒁𝒊𝒏𝒑𝒖𝒕 @ (a - b) = ……………..𝛀
A) 𝟑𝟕𝟒∠𝟗. 𝟏𝟓𝟖 B) 𝟒𝟑𝟕∠𝟗. 𝟓𝟖𝟏
C) 𝟑𝟕𝟒∠𝟗. 𝟏𝟓𝟖 D) 𝟒𝟑𝟕∠𝟗. 𝟓𝟖𝟏
41) Power supplied by the source = ………….. watt
A) 𝟐𝟕𝟎. 𝟏𝟏 B) 𝟐𝟒𝟑. 𝟏𝟐
C) 𝟐𝟓𝟔. 𝟎𝟓 D) 𝟐𝟓𝟎. 𝟎𝟏
42) Power dissipated in the load 𝒁𝒍 =………… watt
A) 𝟏. 𝟖𝟏𝟏 B) 𝟏. 𝟒𝟐𝟒
C) 𝟐. 𝟒𝟒 D) 𝟏. 𝟏𝟐
43) The reactive (𝑸𝒔 ) in the load 𝒁𝒍 =………….. var
A) 𝟎. 𝟗𝟏𝟖𝟏 B)0.601
C) 0.6621 D) 𝟎. 𝟕𝟗𝟎𝟗
44)if 𝒁𝒍 changed to 𝟒𝟎𝟎 𝛀 the power supplied will be …………….. watt
A) 𝟏𝟔𝟒. 𝟏𝟕𝟒𝟖𝟓 B)2.001123
C) 175.2121 D)160.121
