Scribd
Upload
28 views2 pages

Final Visual Inspection Report - (Niel)

The Final Visual Inspection Report for Maaden Aluminium details the servicing and repair of a hydraulic cylinder with specific dimensions and operational actions taken. Key actions include honing the tube, changing various parts such as the rod and seal kit, and polishing components like the piston and trunnion pin. The report lists the personnel involved in the service and includes remarks on the condition of various parts.

Uploaded by

bacusniel02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

Final Visual Inspection Report - (Niel)

The Final Visual Inspection Report for Maaden Aluminium details the servicing and repair of a hydraulic cylinder with specific dimensions and operational actions taken. Key actions include honing the tube, changing various parts such as the rod and seal kit, and polishing components like the piston and trunnion pin. The report lists the personnel involved in the service and includes remarks on the condition of various parts.

Uploaded by

bacusniel02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

FINAL VISUAL INSPECTION REPORT

Customer Name Maaden Aluminium DATE: 21-May-25


SERVICING AND REPAIR OF HYDRAULIC
EQUIPMENT Quotation: S-SQ-39631
CYLIDNER,
MFR./MODEL/P/N: INGOT FURNACE TILT SST Part #: S/F/60319
MAC# MAC1000011522 MSI# MSI471787
FIR DOCUMENT
FIR-00358
NUMBER

INSPECTION STATUS
All the Mentioned Dimensions in (mm):

Cyl Dimension A Cyl Dimension B Cyl Dimension C Cyl Dimension D Cyl Dimension E Cyl Dimension F
5040mm 3836mm 429mm 400mm 240mm 4512mm

OPERATION DETAILS
Cylinder Part Actions Done Remarks
Tube Honing 1pc
Rod Change New 1pc
Seal Kit Change New 1 set (Viton,Chevron)
Gland Polished 1pc
Piston Polished 1pc
Rod Eye Cleaned & Reused
Inlet Port Cleaned & Reused
Outlet Port Cleaned & Reused
Fittings Change New Test Points 2pcs
Gland Bronze Bush Change New 1pc
Tube Eye Others N/A
Spring / Ball / Bonded seal Change New 1 set
Ball Valve Change New 2pcs
Trunnion Pin Polished 2pc
Tube Clamps Change New 2pc
Bolts Cleaned & Reused
Sensor Cleaned & Reused
Cylinder Part Actions Done Remarks
Sensor Cover Cleaned & Reused
Bronze Guide Spacer Change New 1pc
Manifold Bolts Cleaned & Reused 8pc
Gland Bolts Cleaned & Reused 20x90.5mm 2pcs.
Lifting Eye Others N/A

PERSON IN CHARGE

SERVICE TECHNICIAN MELVAR/ROLLY

SERVICE SUPERVISOR RENZI

QC ENGINEER Niel

REMARKS

You might also like