Re-bar on this conical

wall is to be connected
to the existing protection
work end cut-off wall

ELEV. 39.10 ELEV. 39.10 ELEV. 39.10

20cms. thk.
211kg/[Link] CONC.
20cms. thk. 211kg/[Link] CONC. WEARING SURFACE
WEARING SURFACE w/ 12mm Ø w/ 12mm Ø RSB sp.
RSB sp. 30cms. O.C. BOTH WAYS 25cms. O.C. BOTH
WAYS

EXISTING PROTECTION WORK

DAM CREST ELEV. 37.00
2" Ø WEEPHOLES SP.
2.0m O.C. STAGGERED

GRANULAR WALL BACKFILL

MATERIAL
RUBBLE MASONRY w/ (SELECTED EARTHFILL)
12 mm Ø Dowel 211kg/[Link]. CONCRETE
Bar Hook 180° on 12mm Ø RSB sp. BINDER
vert. Bar 30cms. O.C. BOTHWAYS
U/S APRON ELEV. 34.60
40mm Ø PVC
DRAIN PIPE CHUTE BLOCK
sp. 2.0m ON END SILL ELEV. 34.20
CENTER 20cms thk. 211kg/[Link]. CONC. COVERING w/
ELEV. 34.00 2-16mm Ø Dowel
12mm Ø RSB sp. 30cms. O.C. B.W.
80cm Lenght spaced Selected Earthfill
ELEV. 33.60 @30cm O.C. 15 x 15 FILLET Fully Compacted Apr. ELEV. 33.60
D/S Apron Elev. 33.60
7-16mm Ø HOR. BARS
W/ 10mm Ø TIES ALTE.
RUBBLE MASONRY w/ 211kg/[Link]. SPACED @ 0.30m O.C.
CONCRETE BINDER 12mm Ø RSB sp. (See Spot Detail of Pile

see
30cms. O.C. B.W. Cap / Shear Key)

Det
10cms thk. 211kg/[Link]. BAR "B" - 10mm Ø BARS
See CONC. BEDDING

ail A
SP. @ 0.40 m. O.C.
Beam 10cms thk. 211kg/[Link].
100mm Ø HOR. PVC PIPE w/ 10 mm Ø 20cms thk. 211kg/[Link]. ALTERNATE WITH BAR
Detail CONC. BEDDING
PERFORATIONS sp. 25mm O.C. AT QUARTER POINTS CONC. COW w/ 12mm Ø "A" (See Spot Detail of
ELEV. 31.80 STAGGERED - BOTH ENDS OF PVC PIPE PLUGGED 20cms thk. 211kg/[Link]. CONC. COW w/ RSB sp. 30cms. O.C. B.W. PPile Cap/Shear Key)
12mm Ø RSB sp. 30cms. O.C. B.W. SKSP TYPE II
30cms. thk. COARSE AGGREGATES LENGTH = 3 m
20cms thk. 211kg/[Link]. CONC. COW w/ 100mm Ø HOR. PVC PIPE w/ 10 mm Ø 20cms thk. 211kg/[Link].
(20mm Ø - 40mm Ø ) WEIGHT = 48 kg / m
2m x 1m x 1m 2400 PSI PLAIN CONCRETE BLOCKS 12mm Ø RSB sp. 30cms. O.C. B.W. PERFORATIONS sp. 25mm O.C. AT CONC. COW w/ 12mm Ø
RSB sp. 30cms. O.C. B.W. SECTION MODULUS = 874 cm³
QUARTER POINTS STAGGERED - BOTH
15cms thk. COARSE AGGREGATES ENDS OF PVC PIPE PLUGGED WIDTH = 400 mm
(5mm Ø - 20mm Ø) HEIGHT = 100 mm
30cms. thk. COARSE AGGREGATES
THICKNESS = 10.5 mm
15cms thk. FINE AGGREGATES (20mm Ø - 40mm Ø )
SECTION AREA = 61.18 cm²
(Conc. - Sand)
15cms thk. COARSE AGGREGATES
20cms thk. 211kg/[Link]. NOTE :
(5mm Ø - 20mm Ø)
CONC. COW w/ 12mm Ø
RSB sp. 30cms. O.C. B.W. 15cms thk. FINE AGGREGATES USE 3 m length of Sheet Pile:
(Conc. - Sand)

See Concrete Pile Cap

Detail (Steel Sheet Pile) SKSP TYPE II SKSP TYPE II
LENGTH = 6 m LENGTH = 6 m
WEIGHT = 48 kg / m WEIGHT = 48 kg / m
SECTION MODULUS = 874 cm³ SECTION MODULUS = 874 cm³
WIDTH = 400 mm WIDTH = 400 mm
HEIGHT = 100 mm HEIGHT = 100 mm
THICKNESS = 10.5 mm THICKNESS = 10.5 mm
SECTION AREA = 61.18 cm² SECTION AREA = 61.18 cm²

S E C T I O N T H R U 'A - A'
SCALE: 1:50

C1
ELEV. 41.70 ELEV. 41.70
LEGEND:
U/S SIDE D/S SIDE
EXISTING
STRUCTURE
ELEV. 40.70 ELEV. 40.70
DRILL AND EPOXY 20 MM Ø
Existing 20cms. thk. 211kg/[Link] CONC. BAR 300mm MIN.
INCLINED SLAB w/ 12mm Ø RSB sp. 30cms RUBBLE MASONRY
EMBEDMENT. LOCATE AND
O.C. BOTH WAYS AVOID EXISTING REINF. PRIOR
TO DRILLING.
NATURAL GROUND EXISTING
CONCRETE
SS = 1.5 : 1

EXISTING STRUCTURE TO
ELEV. 39.00 BE CHIP OFF FOR RUBBLE
MASONRY FOUNDATION
W/ 2 PART EPOXY
EXISTING REINF.
60-80 cms thk. 40cms Ø, 90 EXISTING CHEMICAL ANCHOR

SS = 1.5 : 1
20cms. thk. x 50 x 110 kgs MIN. BOULDER RIPRAP STRUCTURE TO BE
PRE-CAST REMOVABLE 20 mm Ø WEEP HOLES sp. 2.0m O.C. on 30-40 cms thk. GRAVEL DEMOLISH AND
CONC. PLANKS w/ 4-12mm Ø BLANKET LOWERED
3-12mm Ø LONG BARS RSB sp. AS Existing Reinforce concrete
and 4-12mm Ø TIE BARS 12mm Ø RSB sp. SHOWN ELEV. 37.50 to be trim to form the
ELEV. 37.50
DOWEL CONNECTION DETAIL
25cms. O.C. shape of the Designd Ogee SCALE: 1:50
TRAINING WALL NEW PROPOSED
DAM CREST STRUCTURE
ELEV. 37.20 ELEV. 37.00 OUTLINE OF DAM
20cms. thk.
ELEV. 36.60 211kg/[Link] CONC.
WEARING SURFACE w/
12mm Ø RSB sp.
ELEV. 36.10 ELEV. 36.15 30cms. O.C. BOTH ELEV. 36.10 ELEV. 36.10
WAYS
New 3000 PSI
Reinf. CONCRETE
ELEV. 36.0 between wall of 10mm RSB Sp.
INCLINED
WALL to be VERTICAL WALL existing sluice @ 30cm O.C.
Existing COW to be demolish to be demolish 12mm Ø RSB sp. 15cm thk. Additional SEE DOWEL CHUTE BLOCK
chip off to exposed New 30cms. O.C. Ogee Wearing Surface CONNECTION
Existing 12mm Ø RSB ELEV. 34.20 2.50m HIGH L-SHAPED RETAINING WALL ( " SEE DETAIL ON 12 mm Ø Dowel 4-16mm RSB
Rebars for new U/S APRON BOTHWAYS DETAIL Chute/Baffle Blocks
ELEV. 34.60 sp. 30cms. O.C. SHT. 6 OF 6 " ) to be demolish/ lowered Bar Hook 180° on HOR. Bar
concrete connection
BOTHWAYS vert. Bar
Existing 40mm Ø PVC
DRAIN PIPE EMBEDDED on 20cms thk. 211kg/[Link]. CONC.
COVERING in Exisitng D/S Apron w/ END SILL ELEV. 34.00
CENTER PIER to be 40mm Ø PVC DRAIN
Extended 12mm Ø RSB sp. 30cms. O.C. B.W. PIPE sp. 2.0m O.C.
ELEV. 34.30 of Existing U/S
Apron Existing Concrete to Existing Concrete to ELEV. 33.60 ELEV. 33.60
be chip off to be chip off to Existing 7-16mm Ø HOR. BARS See Beam Detail
exposed Rebars for 211kg/[Link]. W/ 10mm Ø TIES ALTE.
Existing 20cms thk.
exposed Rebars for
new concrete new concrete CONCRETE SPACED @ 0.30m O.C. BEAM DETAIL
Existing Concrete to (See Spot Detail of Pile SCALE: NDTS
connection
-1

211kg/[Link]. CONC. COW connection EXISTING RUBBLE MASONRY w/ 211KG/sq.m CONC. BINDER ELEV. 32.90
be chip off to
ail A

Cap / Shear Key)

w/ 12mm Ø RSB sp. 30cms. exposed Rebars for
Det

O.C. B.W. new concrete

Existing
connection
see

20mm Ø RSB
sp. 22cms
Existing 10cms thk. 2m x 1m x 1m 2400 PSI PLAIN CONCRETE BLOCKS
Existing 16mm Ø 211kg/[Link]. CONC.
O.C. BEDDING
RSB sp. 28cms
Existing 20cms thk. O.C.
211kg/[Link]. CONC. COW Existing 100mm Ø HOR. PVC PIPE w/ 10 Existing 20cms thk. 100mm Ø HOR. PVC PIPE w/ 10 mm Ø
mm Ø PERFORATIONS sp. 25mm O.C. AT 211kg/[Link]. CONC. PERFORATIONS sp. 25mm O.C. AT
w/ 12mm Ø RSB sp. 30cms.
Existing 20cms thk. QUARTER POINTS STAGGERED - PROVIDE COW w/ 12mm Ø RSB sp. QUARTER POINTS STAGGERED - PROVIDE
O.C. B.W. Existing 20cms thk.
211kg/[Link]. CONC. PLUGS BOTH ENDS OF PIPE 30cms. O.C. B.W. PLUGS BOTH ENDS OF PIPE BAR "B" - 10mm Ø BARS
COW w/ 12mm Ø RSB 211kg/[Link]. CONC. COW
SP. @ 0.40 m. O.C.
sp. 30cms. O.C. B.W. w/ 12mm Ø RSB sp. 30cms. ALTERNATE WITH BAR
O.C. B.W. Existing 30cms. thk. COARSE AGGREGATES 30cms. thk. COARSE AGGREGATES Exisitng 20cms thk.
211kg/[Link]. CONC. "A" (See Spot Detail of
(20mm Ø - 40mm Ø ) (20mm Ø - 40mm Ø )
Existing 20cms COW w/ 12mm Ø RSB sp. PPile Cap/Shear Key)
thk. 211kg/ Existing 15cms thk. COARSE AGGREGATES 15cms thk. COARSE AGGREGATES 30cms. O.C. B.W.
[Link]. CONC. (5mm Ø - 20mm Ø) (5mm Ø - 20mm Ø)
COW w/ 12mm Ø
RSB sp. 30cms. Existing 15cms thk. FINE AGGREGATES 15cms thk. FINE AGGREGATES
O.C. B.W. (Conc. - Sand) (Conc. - Sand)

See Concrete Pile Cap

Detail (Steel Sheet Pile)

SKSP TYPE II

2 - 12mm Ø BARS S E C T I O N T H R U 'C - C' LENGTH = 6 m

SCALE: 1:50 WEIGHT = 48 kg / m
SECTION MODULUS = 874 cm³
A1 CHUTE BLOCK
ELEV. 34.20
WIDTH = 400 mm
HEIGHT = 100 mm
3-12 mm Ø BARS 2 - 12mm Ø BARS THICKNESS = 10.5 mm
SECTION AREA = 61.18 cm²

A1 NOTE :

1-12 mm Ø BARS 3-12 mm Ø BARS CHUTE / USE 6 m length of Sheet Pile:

BAFFLE BLOCK
ELEV. 34.20

2-12 mm Ø BARS

40mm Ø PVC DRAIN

PIPE sp. 1.0m O.C.

40mm Ø PVC DRAIN

PIPE sp. 1.0m O.C.

SECTION THRU A1 DETAIL ' A '

SCALE: 1:30 SECTION THRU A1 DETAIL ' A-1 '
SCALE: 1:30