Scribd
Upload
24 views1 page

PURe® SLIDE Inline Sliding Door System Technical Datasheet 18.07.2024

The PURe® SLIDE Inline Sliding door system is designed for high thermal performance and compliance with building regulations, featuring a patented PUR foam thermal barrier and the ability to accommodate glazing up to 52mm thick. It is constructed from extruded aluminium and offers various finishes, with impressive U-values for both double and triple glazing. The system is environmentally compliant and suitable for projects seeking BREEAM assessment benefits.

Uploaded by

Raman Hammam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

PURe® SLIDE Inline Sliding Door System Technical Datasheet 18.07.2024

The PURe® SLIDE Inline Sliding door system is designed for high thermal performance and compliance with building regulations, featuring a patented PUR foam thermal barrier and the ability to accommodate glazing up to 52mm thick. It is constructed from extruded aluminium and offers various finishes, with impressive U-values for both double and triple glazing. The system is environmentally compliant and suitable for projects seeking BREEAM assessment benefits.

Uploaded by

Raman Hammam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

V01_19.01.

2023

PURe® SLIDE Inline Sliding


Door System
Technical Datasheet
Scope
The PURe® SLIDE Inline Sliding door system has been
designed to meet current and future building regulations, with
impressive U-values and thermal performances. PURe® is an
evolved generation of aluminium window and door systems
manufactured in the UK. It combines the long life and low
maintenance of aluminium with a patented high insulation
PUR foam thermal barrier. PURe® SLIDE Inline Sliding doors
are capable of accepting glazing up to 52mm thick.

*Image for indicative


purposes only

Materials
• Extruded aluminium is generally Aluminium Alloy 6060.T6/
T66, 6063.T6/T66, 6082.T6 to BS EN 755-9 and EN
12020-2.
• Polyamide thermal barriers are manufactured in Typical Sizes
accordance with PA66 GF25. Max door leaf width 3005mm
Max door leaf height 2916mm
• The Gasketry is generally manufactured in accordance with Max outerframe width Project Specific
BS ISO 3302-1.
Max outerframe height 3000mm
• The fixings are generally A2 Stainless Steel screws. Max weight per door leaf 160kg
*Average U-values
CEN standard (Double Glazed) 1.4 W/m²K

Finishes CEN standard (Triple Glazed) 0.95 W/m²K

PURe® SLIDE Inline Sliding door sections are available typically Glazing
in two finishes. Thickness 28mm - 52mm
Testing
• Polyester Powder Coating to BS EN 12206-1 Part 1
painted in house. Surface finish to a minimum of 40 Security PAS24 & SBD
microns standard, or enhanced to suit project **BS6375 -1 ✓
requirements, in accordance with ISO 9001, ISO 14001
and ISO 45001.
BS6375 - 2 ✓
• Anodised finishes are to BS3897 to a minimum of 25 *All calculations are based on CEN sized single doors 1230mm x 2180mm ±25% and double door 2000mm x
2180mm ±25%.
microns (AA25), supplied in either satin or polished
** Results may vary based on specification. Further details are available upon request.
finish in a limited range of colours.
Test certifications available upon requests, please contact.

Construction
PURe® is constructed using mitred corners and joined with
mechanical cleats and screwports; alignment chevrons assist in
clean, accurate mitres. A proprietary sealant is used on all metal
joints in line with good practice.

Environmental
Senior Architectural Systems is fully compliant with BS EN ISO
9001, BS EN ISO 14001, ISO 45001 and BES6001 standards.
When used on projects involved in a BREEAM assessment, or
within the Code for a Sustainable Built Environment, (which
therefore involves the Green Guide specification) can offer
significant benefits. For project specific assistance, please
contact our specification team.

Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.
Tel: 01709 772 600 E-mail: [email protected] www.seniorarchitectural.co.uk

Due to a policy of continual product development, Senior Architectural Systems reserves the right to alter any of the specifications given in
this publication without prior notice. The specification for any given application must be checked with Senior Architectural Systems prior to
manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems. Always refer to the Technical Manual.

You might also like