Model S550 Maintenance Manual (Rev 20)
5-12-14-0 (Rev 15)
INSPECTION PHASE 14
Date: _______________
Registration Number: _______________
Serial Number: _______________
Total Time: _______________
1. Description
A. Phase 14 consists of items to be inspected at the first 10,000 hours and every 3000 hours thereafter.
B. Inspection items are listed in order of the zone in which the inspection is to be performed. A descriptive statement of
the inspection requirement and the Item Code Number for cross reference to section 5-10-01 is provided. In many
instances, tasks define more specifically the scope and extent of each required inspection. These tasks are printed in
the individual chapters of this manual.
C. The right portion of each page provides room for the mechanic's and inspector's initials and remarks. These pages
may be reproduced as a checklist for use when performing this inspection phase.
2. General Inspection Criteria
A. As you complete each of the inspection tasks in this Inspection Phase, examine the adjacent area while access is
available to find conditions that need more maintenance.
B. If it is necessary to replace a component or to make a change to a system while you complete a task, do the task
again before the system or component is returned to service.
ITEM CODE TASK ZONE MECH INSP REMARKS
NUMBER
Forward Pressure Bulkhead Aft Side - Inspect. Task 53-10- 142, 142,
A531013
00-251 231, 232
Aft Pressure Bulkhead Forward Side - Inspect. Task 53-10- 171, 172,
A531014
00-252 271, 272
Main Spar Carry-Thru Assembly - Inspect. Task 53-10-09-
A531017 161, 162
214
Main Spar Weep Hole at WS 113 - Complete Task 57-00- 511, 512,
A571005
00-217 611, 612
A573003 Jack Pad - Inspect. Task 57-00-00-216 512, 612
*** End of Phase 14 Inspection Items ***
Copyright © Textron Aviation Inc. Page 1 of 1
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:12 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-00-6 (Rev 19)
TASK 53-10-00-251
5. Forward Pressure Bulkhead, Aft Side Inspection
A. Inspect Aft Side of the Forward Pressure Bulkhead.
(1) Remove instruments, instrument panels and sundeck/glareshield as necessary to accomplish this inspection.
Remove cockpit floor panels 242BT, 232AT, 231AT, and 241AT. Refer to Chapter 6, Access Plates and Panels
Identification - Description and Operation.
(2) Inspect for fatigue cracks in the radii of the nested angles on the aft side of the bulkhead around the periphery of
the bulkhead using the eddy current method. Use the applicable test procedure as described in the Model 500
Series Nondestructive Testing Manual, Part 6, Forward and Aft Pressure Bulkhead.
(3) Restore access as required.
END OF TASK
Copyright © Textron Aviation Inc. Page 1 of 2
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:21 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-00-6 (Rev 19)
Figure 3 : Sheet 1 : Cockpit Floorboard Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 2 of 2
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:21 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-00-6 (Rev 19)
TASK 53-10-00-252
6. Aft Pressure Bulkhead, Forward Side Inspection
A. Inspect Aft Pressure Bulkhead, Forward Side.
(1) Remove toilet and toilet floor panels 272CT, 271CTC, and 271CT. Refer to Chapter 6, Access Plates and
Panels Identification - Description and Operation. Remove aft pressure bulkhead upholstery (it may be necessary
to remove aft dividers and furnishings to remove upholstery).
(2) Inspect for fatigue cracks in the radii of the nested angles on the forward side of the bulkhead around the
periphery of the bulkhead using the eddy current method. Use the applicable test procedure as described in the
Model 500 Series Nondestructive Testing Manual, Part 6, Forward and Aft Pressure Bulkhead.
(3) Restore access as required.
END OF TASK
Copyright © Textron Aviation Inc. Page 1 of 2
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:29 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-00-6 (Rev 19)
Figure 6 : Sheet 1 : Aft Cabin Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 2 of 2
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:29 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-09-6 (Rev 19)
TASK 53-10-09-214
5. Main Spar Carry-Thru Assembly Inspection
A. Inspect Main Spar Carry-Thru Assembly (Refer to Figure 603).
(1) Remove cabin floor panels 252AT and 261AL, and toilet floor panels 272AT and 271AT. (Refer to Chapter 6,
Access Plates and Panels Inspection - Description and Operation.)
NOTE: It may be necessary to temporarily detach the aft portion of the sidewall floors (between
the outboard seat rails and the sidewall heating ducts) to gain access for this inspection.
(2) Inspect the bolt holes in the front carry-thru forging for fatigue cracks, using the Eddy Current Method. Use the
applicable test procedure as described in the Model 500 Series Nondestructive Testing Manual, Part 6, Main
Spar Carry-Thru Assembly.
(3) Restore access as required.
END OF TASK
Copyright © Textron Aviation Inc. Page 1 of 4
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:37 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-09-6 (Rev 19)
Figure 603 : Sheet 1 : Main Spar Carry-Thru Assembly Inspection
Copyright © Textron Aviation Inc. Page 2 of 4
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:37 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-09-6 (Rev 19)
Figure 5 : Sheet 1 : Cabin Floorboards Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 3 of 4
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:37 CST 2021
Model S550 Maintenance Manual (Rev 20)
53-10-09-6 (Rev 19)
Figure 6 : Sheet 1 : Aft Cabin Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 4 of 4
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:37 CST 2021
Model S550 Maintenance Manual (Rev 20)
57-00-00-6 (Rev 19)
TASK 57-00-00-216
6. Jack Pad Inspection
A. Inspect Jack Pads.
(1) Inspect for cracks in the jack pad attach hole on lower aft wing spar, aft horizontal flange WS 121.67, using the
Eddy Current Method. Use the applicable test procedure as described in the Model 500 Series Nondestructive
Testing Manual, Part 6, Wing Jack Pad.
END OF TASK
Copyright © Textron Aviation Inc. Page 1 of 1
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:50 CST 2021
Model S550 Maintenance Manual (Rev 20)
57-00-00-6 (Rev 19)
TASK 57-00-00-217
7. Main Spar Weep Hole at WS 113 Inspection
A. Preparation.
(1) Defuel the airplane. Refer to Chapter 12, Fuel - Servicing.
B. Access.
(1) Remove the left wing access panels 521AB and 522AB to get access. Refer to Chapter 6, Access Plates and
Panels Identification - Description and Operation.
(2) Remove the right wing access panels 5621AB and 622AB to get access. Refer to Chapter 6, Access Plates and
Panels Identification - Description and Operation.
C. Complete the Main Spar Weep Hole at WS 113 Inspection.
(1) Examine the main wing spar, lower spar cap weep holes on the sides of the stiffener at WS 113.12 for fatigue
cracks. Use the applicable test procedure as given in the Model 500 Series Nondestructive Testing Manual, Part
6, Main Spar Weep Hole at WS 113.
D. Restore Access.
(1) Install the left wing access panels 521AB and 522AB. Refer to Chapter 6, Access Plates and Panels
Identification - Description and Operation.
(2) Install the right wing access panels 621AB and 622AB. Refer to Chapter 6, Access Plates and Panels
Identification - Description and Operation.
END OF TASK
Copyright © Textron Aviation Inc. Page 1 of 5
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:52 CST 2021
Model S550 Maintenance Manual (Rev 20)
57-00-00-6 (Rev 19)
Figure 9 : Sheet 1 : Left Wing Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 2 of 5
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:52 CST 2021
Model S550 Maintenance Manual (Rev 20)
57-00-00-6 (Rev 19)
Figure 9 : Sheet 2 : Left Wing Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 3 of 5
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:52 CST 2021
Model S550 Maintenance Manual (Rev 20)
57-00-00-6 (Rev 19)
Figure 10 : Sheet 1 : Right Wing Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 4 of 5
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:52 CST 2021
Model S550 Maintenance Manual (Rev 20)
57-00-00-6 (Rev 19)
Figure 10 : Sheet 2 : Right Wing Access Plates/Panels Identification
Copyright © Textron Aviation Inc. Page 5 of 5
Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Feb 04 10:46:52 CST 2021
