Quick-Start Guide

4 Port Black SuperSpeed USB 3.0 Hub

Product Diagram (ST4300USB3) Installation

1. Connect the included power adapter to the USB hub. The power LED should light
1 up solid. Supplying external power is optional, however to ensure each USB port is
fully powered, connecting external power is recommended.
2. Connect the USB cable from the USB hub (type B port) to the host computer system.
NOTE: If connected to a USB 2.0 host port, the hub will only operate at USB 2.0 speeds.
3. The operating system should detect the hub immediately and automatically install
it.
2 4. Once installation is complete, USB 1.x/2.0/3.0 devices should be able to be
connected to the hub and recognized.
Port Function
1 Power LED • Solid: Hub is receiving power.
Specifications
2 USB-A Ports (4) • Used to connect USB devices to the Hub. Bus Interface USB 3.0
Number of Ports 4
Connectors • USB-A x 4
• USB-B x 1
• DC Power x 1
LEDs Power x 1
4 Maximum Data Transfer Rate USB 3.0L 5 Gbps
3
Enclosure Material Plastic
Port Function Power Adapter 5VDC, 2000mA, type M plug
• Used with the Power Adapter, to power the Operating Temperature 0°C~55°C (32°F~131°F)
3 Power Port
Hub. Storage Temperature -20°C~85°C (-4°F~185°F)
• Used to connect the Host Computer to the Humidity 5%~95% RH
4 USB-B Port (Host) Hub.
Dimensions 152.0mm x 59.6mm x 23.5mm
Requirements Weight 480g

For the latest requirements, please visit www.startech.com/ST4300USB3, www.startech.

com/ST4300USB3EU, or www.startech.com/ST4300USB3GB

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: Warranty Information
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including This product is backed by a two year warranty.
interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
the user’s authority to operate the equipment.
For the State of California Limitation of Liability
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov In no event shall it be the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or
Industry Canada Statement agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
This Class B digital apparatus complies with Canadian ICES-003. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. or exclusions contained in this statement may not apply to you.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: Safety Measures
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may • If product has an exposed circuit board, do not touch the product under power.
cause undesired operation of the device. Mesures de sécurité
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation • Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.
est autorisée aux deux conditions suivantes: 安全対策
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, • 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Misure di sicurezza
IC Radiation Exposure Statement
• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.
This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 0.5cm Säkerhetsåtgärder
between the radiator and your body. • Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols StarTech.com StarTech.com LLP StarTech.com StarTech.com Ltd. FR: startech.com/fr
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third- Ltd. 4490 South Hamilton Ltd. Siriusdreef 17-27 DE: startech.com/de
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only 45 Artisans Cres Road Unit B, Pinnacle 15 2132 WT Hoofddorp ES: startech.com/es
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which London, Ontario Groveport, Ohio Gowerton Rd, The Netherlands NL: startech.com/nl
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered N5V 5E9 43125 Brackmills IT: startech.com/it
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the Canada U.S.A. Northampton JP: startech.com/jp
property of their respective holders. NN4 7BW
United Kingdom