dev-cpp-users Mailing List for Dev-C++ (Page 24)

metalseb <met...@fr...> writes:
> 
> The errors occurs here :
> 
> hHyperLinkWnd= CreateWindowEx(dwExStyle,
> 		wcex.lpszClassName,
> 		"",
> 		dwStyle,
> 		HypLinkData.cx,HypLinkData.cy,
> 		size.cx,size.cy,
> 		hWndParent,
> 		NULL,
> 		wcex.hInstance,
> 		this); <- Here at the "this" pointer passing, compiling crashes
> 
> I've tried to pass "NULL" as parameter but same results.

Are you still stuck with this?

My book says CreateWindowEx is:

CreateWindowEx(DWORD ExStyle,
		LPCTSTR Classname,
		LPCSTR WindowsName,
		DWORD Style,
		int X,
		int Y,
		int Width,
		int Height,
		HWND hParent,
		LPCTSTR hMenu,
		HINSTANCE hInstance,
		LPVOID Param);

I'm surprised that casting each parameter explicitly is not working.

Elizabeth

"Evandro Humberto Rodrigues" <ero...@ro...> writes:

> Some body can help me how to compile the lib Mysql++ on DevC++?
> 
> Thanks a lot...

Someone recently mentioned a tool in the mingw-util collection that
can read a MSVC .dsw file and produce a gnu makefile. If Mysql++ comes
with the MSVC files, this may help.

<http://mefriss1.swan.ac.uk/~jfonseca/gnu-win32/software/utils/>

Other than that, I suggest using ./configure in a MSYS environment:

<http://www.mingw.org/msys.shtml>

But support for mingw is somewhat limited (but growing). Else its just
doing it by hand.

Elizabeth

No, I don't think Microsoft adds these lines to the executable. If
you run the executable from the command line, I'm pretty sure you don't
see this behaviour other than when testing the application from the
IDE.

/Per W

On Mon, 30 Sep 2002, Samuel Keding wrote:

> I don't know if it would make up the difference in
> size, but Microsoft adds a couple lines to every
> executable. It is something like 
> cout << "Press any key to continue.";
> cin.ignore(256,'\n');
> so microsoft's stuff would be a little bigger unless,
> you added those lines manually in Dev. Unless dev does
> it nowadays. I wouldn't know because I have an older
> version of dev. 
> 
> __________________________________________________
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> 

I think that may be only true in certain cases, such as with
Student/Learning Editions. Or perhaps it's an option I don't have turned on.

When run, the executables I produced in this experiment (and others run
since I recently installed the .net IDE) do as expected and return to the
command prompt.

I do remember the "Press any key to continue" behavior from the "Learning
Edition" of MSVC++ 6 that we used in CS classes at Belhaven College, though.
(And I found it annoying, to be honest.)

regards,
Rob

> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...]On Behalf Of Samuel
> Keding
> Sent: Monday, September 30, 2002 10:14 PM
> To: dev...@li...
> Subject: [Dev-C++] Re: compare and contrast
>
>
> I don't know if it would make up the difference in
> size, but Microsoft adds a couple lines to every
> executable. It is something like
> cout << "Press any key to continue.";
> cin.ignore(256,'\n');
> so microsoft's stuff would be a little bigger unless,
> you added those lines manually in Dev. Unless dev does
> it nowadays. I wouldn't know because I have an older
> version of dev.
>
> __________________________________________________
> Do you Yahoo!?
> New DSL Internet Access from SBC & Yahoo!
> http://sbc.yahoo.com
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

Hi,
 
I had a similar problem using the common font dialog in VB. As far as I can
remember you have to specify a type of font to list using one of the flags
otherwise Windows doesn't know which fonts to enumerate.
 
CF_WYSIWYG, CF_PRINTERFONTS or CF_TTONLY
 
 
_____________________________
Marc Heiligers
-----Original Message-----
From: Vlada Djurovic [mailto:dj...@im...] 
Sent: 01 October 2002 12:57 PM
To: DevC++ help
Subject: [Dev-C++] fonts


Hi.
I have a strange problem: I want to use ChooseFont API function to display
font selection dialog. I wrote a procedure, compiled, but when I start the
application and press choose font from the menu, I get the message: "There
are no fonts instaled. Open Fonts folder in Control Panel to install
fonts.". Of course, fonts are installed. I have Windows 2000 and DevCpp
4.9.5.0. Can anyone tell me what could cause this? Here is the code I wrote
to display font dialog:
 
case WM_COMMAND:
           switch(LOWORD(wParam))
           {
               case ID_FORMAT_FONT:
               {
                   CHOOSEFONT chFont;
                   chFont.lStructSize=sizeof(CHOOSEFONT);
                   chFont.hwndOwner=hwnd;
                   chFont.lpLogFont=&lFont;
                   chFont.iPointSize=1;
                   chFont.Flags=CF_INITTOLOGFONTSTRUCT|CF_EFFECTS;
                   chFont.rgbColors=RGB(0,0,0);
                   chFont.nFontType=REGULAR_FONTTYPE;
                   if(!ChooseFont(&chFont))
                       MessageBox(hwnd,"Error in font
dialog","Error",MB_OK|MB_ICONSTOP);
               }
               break;
           }

Some body can help me how to compile the lib Mysql++ on DevC++?

Thanks a lot...


--------------------------------------
Evandro H. Rodrigues
Ind=FAstrias ROMI S/A - Brazil
Quality Assurance Dep F14-07
Phone: 55-19-455-9529
Fax: 55-19-455-9084
email: ero...@ro...

null

---------------------------------
자동차 보험 33% ↓  보험료 비교견적 서비스 - 야후! 금융정보
친구들과 함께 바꿔보세요 - 야후! 메신저

What about *this  instead of this ?


>From: metalseb <met...@fr...>
>Reply-To: met...@fr...
>To: Elizabeth Barham <sog...@ya...>,devcpp mailing list 
><dev...@li...>
>Subject: Re: [Dev-C++] ANSI C++ forbids implicit conversion from "void*"
>Date: Tue, 01 Oct 2002 09:17:46 +0200
>
>Thanx Elizabeth. I've already tried this solution but I can get no better 
>results.
>
>The errors occurs here :
>
>hHyperLinkWnd= CreateWindowEx(dwExStyle,
>		wcex.lpszClassName,
>		"",
>		dwStyle,
>		HypLinkData.cx,HypLinkData.cy,
>		size.cx,size.cy,
>		hWndParent,
>		NULL,
>		wcex.hInstance,
>		this); <- Here at the "this" pointer passing, compiling crashes
>
>I've tried to pass "NULL" as parameter but same results.
>
>I'm really stuck with this.
>
>Anybody ever tried to compile this class under DevCpp ?
>
>Kind regards
>
>--
>Seb
>
>
>
>-------------------------------------------------------
>This sf.net email is sponsored by: DEDICATED SERVERS only $89!
>Linux or FreeBSD, FREE setup, FAST network. Get your own server
>today at http://www.ServePath.com/indexfm.htm
>_______________________________________________
>Dev-cpp-users mailing list
>Dev...@li...
>TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users




_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com

Hi.
I have a strange problem: I want to use ChooseFont API function to
display font selection dialog. I wrote a procedure, compiled, but when I
start the application and press choose font from the menu, I get the
message: =93There are no fonts instaled. Open Fonts folder in Control
Panel to install fonts.=94. Of course, fonts are installed. I have =
Windows
2000 and DevCpp 4.9.5.0. Can anyone tell me what could cause this? Here
is the code I wrote to display font dialog:
=20
case WM_COMMAND:
           switch(LOWORD(wParam))
           {
               case ID_FORMAT_FONT:
               {
                   CHOOSEFONT chFont;
                   chFont.lStructSize=3Dsizeof(CHOOSEFONT);
                   chFont.hwndOwner=3Dhwnd;
                   chFont.lpLogFont=3D&lFont;
                   chFont.iPointSize=3D1;
                   chFont.Flags=3DCF_INITTOLOGFONTSTRUCT|CF_EFFECTS;
                   chFont.rgbColors=3DRGB(0,0,0);
                   chFont.nFontType=3DREGULAR_FONTTYPE;
                   if(!ChooseFont(&chFont))
                       MessageBox(hwnd,"Error in font
dialog","Error",MB_OK|MB_ICONSTOP);
               }
               break;
           }

When I open a NEW c++ file,it shows error saying "can not create a code 
completion file and a default file.How can I solve it?

The error occurs at :

while (fs!='.') strncpy(ls, fs, 1);

ls is a string (In C point of view) and fs is a char. Char is not a string. You must consider strings as 
arrays of char. Arrays are seen like pointers to allocated memory in C.

And char is a one-byte implementation of int.

strncpy wants two pointers to arrays of char as first two parameters. You pass one pointer and 
one char (one int).

Didn't tried this, but you should write :

while (fs!='.') strncpy(ls, (char*)&fs, 1);

Although getting an index initialised to 0 at the beginning of the loop and making loop look like 
this :

while (fs!='.') ls[index++]=fs;
ls[index]='\0';

Would be much better IMHO.

Kind regards

--
Seb

Thanx Elizabeth. I've already tried this solution but I can get no better results.

The errors occurs here :

hHyperLinkWnd= CreateWindowEx(dwExStyle,
		wcex.lpszClassName,
		"",
		dwStyle,
		HypLinkData.cx,HypLinkData.cy,
		size.cx,size.cy,
		hWndParent,
		NULL,
		wcex.hInstance,
		this); <- Here at the "this" pointer passing, compiling crashes

I've tried to pass "NULL" as parameter but same results.

I'm really stuck with this.

Anybody ever tried to compile this class under DevCpp ?

Kind regards

--
Seb

Odd.. the equivalent of that in C compiles to 8kb in GCC3.2 - 4KB with
GCC 2.95

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Rob
Sent: Monday, September 30, 2002 7:26 PM
To: Dev-C++ List
Subject: RE: [Dev-C++] a small comparison

Ahh, I've just learned my way around MSVC++ a bit better now! Oddly
enough,
the difference in executable size between debug and release mode was
never
covered in any of my classes.

The release mode version of the executable is down to 164 KB, which is
still
a healthy bit larger than the one generated with Dev-C++, but not nearly
as
bad as the original version.

Rob

> -----Original Message-----
> From: Mat=EDas Peque=F1o [mailto:ma...@fi...]
> Sent: Monday, September 30, 2002 9:13 PM
> To: Rob
> Subject: Re: [Dev-C++] a small comparison
>
>
> I'm sorry, the word was release,
>
> you're compiling the exe in Debug mode, try compiling it in
> Release mode...
>
> ----- Original Message -----
> From: "Rob" <ro...@us...>
> To: "Dev-C++ List" <dev...@li...>
> Sent: Monday, September 30, 2002 10:53 PM
> Subject: RE: [Dev-C++] a small comparison
>
>
> > Retail mode? I'm not familiar with that term.
> >
> > The process I used was to create a New Win32 Project, selecting
console
> > application and checking blank project on the Win32 Application
Wizard
> > dialogue. Then I selected Add New Item (.cpp file) and paste the
source
> into
> > it.
> >
> > I saved the file, built & compiled.
> >
> > Rob
> >
> > > -----Original Message-----
> > > From: dev...@li...
> > > [mailto:dev...@li...]On Behalf Of
Mat=EDas
> > > Peque=F1o
> > > Sent: Monday, September 30, 2002 8:32 PM
> > > To: Dev-C++ List
> > > Subject: Re: [Dev-C++] a small comparison
> > >
> > >
> > > Some tips, be sure you're in retail mode, you're not linking
> > > statically any
> > > unused library and you started a Win32 Console project.
> > > If the size still is the same, I don't have the slighest idea :)
> > >
> > > ----- Original Message -----
> > > From: "Rob" <ro...@us...>
> > > To: "Dev-C++ List" <dev...@li...>
> > > Sent: Monday, September 30, 2002 9:40 PM
> > > Subject: [Dev-C++] a small comparison
> > >
> > >
> > > > This isn't exactly cutting-edge science, but I pass it along
> > > for posterity
> > > > anyway.
> > > >
> > > > I have Dev-C++ and Microsoft Visual C++ .net Standard
> installed on the
> > > same
> > > > Win2K machine here, and compiled the same file in each:
> > > >
> > > > #include <iostream>
> > > > using namespace std;
> > > >
> > > > int main()
> > > > {
> > > > cout << "Doh!";
> > > > return 0;
> > > > }
> > > >
> > > > The difference in size between the .exe files created by the
> > > two programs
> > > > was the curious part.
> > > >
> > > > Microsoft Visual C++ .net Standard =3D=3D> 452 KB
> > > > Dev-C++                            =3D=3D>  71 KB
> > > >
> > > > It's hardly scientific, based on only one scenario, but I
thought it
> was
> > > > interesting.
> > > >
> > > > regards,
> > > > Rob
> > > >
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > This sf.net email is sponsored by:ThinkGeek
> > > > Welcome to geek heaven.
> > > > http://thinkgeek.com/sf
> > > > _______________________________________________
> > > > Dev-cpp-users mailing list
> > > > Dev...@li...
> > > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > >
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This sf.net email is sponsored by:ThinkGeek
> > > Welcome to geek heaven.
> > > http://thinkgeek.com/sf
> > > _______________________________________________
> > > Dev-cpp-users mailing list
> > > Dev...@li...
> > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > Dev-cpp-users mailing list
> > Dev...@li...
> > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> >
>
>




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Dev-cpp-users mailing list
Dev...@li...
TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

I don't know if it would make up the difference in
size, but Microsoft adds a couple lines to every
executable. It is something like 
cout << "Press any key to continue.";
cin.ignore(256,'\n');
so microsoft's stuff would be a little bigger unless,
you added those lines manually in Dev. Unless dev does
it nowadays. I wouldn't know because I have an older
version of dev. 

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com

Interesting. I don't have version 6 available. Does anyone else have a way
to compare or contrast?

Rob

> -----Original Message-----
> From: Matías Pequeño [mailto:ma...@fi...]
> Sent: Monday, September 30, 2002 9:35 PM
> To: Rob
> Subject: Re: [Dev-C++] a small comparison
>
>
> I did the same example and I got a 55kb file in VC++ 6.0...
>
> ----- Original Message -----
> From: "Rob" <ro...@us...>
> To: "Dev-C++ List" <dev...@li...>
> Sent: Monday, September 30, 2002 11:25 PM
> Subject: RE: [Dev-C++] a small comparison
>
>
> > Ahh, I've just learned my way around MSVC++ a bit better now! Oddly
> enough,
> > the difference in executable size between debug and release
> mode was never
> > covered in any of my classes.
> >
> > The release mode version of the executable is down to 164 KB, which is
> still
> > a healthy bit larger than the one generated with Dev-C++, but not nearly
> as
> > bad as the original version.
> >
> > Rob
> >
> > > -----Original Message-----
> > > From: Matías Pequeño [mailto:ma...@fi...]
> > > Sent: Monday, September 30, 2002 9:13 PM
> > > To: Rob
> > > Subject: Re: [Dev-C++] a small comparison
> > >
> > >
> > > I'm sorry, the word was release,
> > >
> > > you're compiling the exe in Debug mode, try compiling it in
> > > Release mode...
> > >
> > > ----- Original Message -----
> > > From: "Rob" <ro...@us...>
> > > To: "Dev-C++ List" <dev...@li...>
> > > Sent: Monday, September 30, 2002 10:53 PM
> > > Subject: RE: [Dev-C++] a small comparison
> > >
> > >
> > > > Retail mode? I'm not familiar with that term.
> > > >
> > > > The process I used was to create a New Win32 Project, selecting
> console
> > > > application and checking blank project on the Win32
> Application Wizard
> > > > dialogue. Then I selected Add New Item (.cpp file) and paste the
> source
> > > into
> > > > it.
> > > >
> > > > I saved the file, built & compiled.
> > > >
> > > > Rob
> > > >
> > > > > -----Original Message-----
> > > > > From: dev...@li...
> > > > > [mailto:dev...@li...]On Behalf Of
> Matías
> > > > > Pequeño
> > > > > Sent: Monday, September 30, 2002 8:32 PM
> > > > > To: Dev-C++ List
> > > > > Subject: Re: [Dev-C++] a small comparison
> > > > >
> > > > >
> > > > > Some tips, be sure you're in retail mode, you're not linking
> > > > > statically any
> > > > > unused library and you started a Win32 Console project.
> > > > > If the size still is the same, I don't have the slighest idea :)
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Rob" <ro...@us...>
> > > > > To: "Dev-C++ List" <dev...@li...>
> > > > > Sent: Monday, September 30, 2002 9:40 PM
> > > > > Subject: [Dev-C++] a small comparison
> > > > >
> > > > >
> > > > > > This isn't exactly cutting-edge science, but I pass it along
> > > > > for posterity
> > > > > > anyway.
> > > > > >
> > > > > > I have Dev-C++ and Microsoft Visual C++ .net Standard
> > > installed on the
> > > > > same
> > > > > > Win2K machine here, and compiled the same file in each:
> > > > > >
> > > > > > #include <iostream>
> > > > > > using namespace std;
> > > > > >
> > > > > > int main()
> > > > > > {
> > > > > > cout << "Doh!";
> > > > > > return 0;
> > > > > > }
> > > > > >
> > > > > > The difference in size between the .exe files created by the
> > > > > two programs
> > > > > > was the curious part.
> > > > > >
> > > > > > Microsoft Visual C++ .net Standard ==> 452 KB
> > > > > > Dev-C++                            ==>  71 KB
> > > > > >
> > > > > > It's hardly scientific, based on only one scenario, but
> I thought
> it
> > > was
> > > > > > interesting.
> > > > > >
> > > > > > regards,
> > > > > > Rob
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > -------------------------------------------------------
> > > > > > This sf.net email is sponsored by:ThinkGeek
> > > > > > Welcome to geek heaven.
> > > > > > http://thinkgeek.com/sf
> > > > > > _______________________________________________
> > > > > > Dev-cpp-users mailing list
> > > > > > Dev...@li...
> > > > > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > -------------------------------------------------------
> > > > > This sf.net email is sponsored by:ThinkGeek
> > > > > Welcome to geek heaven.
> > > > > http://thinkgeek.com/sf
> > > > > _______________________________________________
> > > > > Dev-cpp-users mailing list
> > > > > Dev...@li...
> > > > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > This sf.net email is sponsored by:ThinkGeek
> > > > Welcome to geek heaven.
> > > > http://thinkgeek.com/sf
> > > > _______________________________________________
> > > > Dev-cpp-users mailing list
> > > > Dev...@li...
> > > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > >
> > >
> > >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > Dev-cpp-users mailing list
> > Dev...@li...
> > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> >
>
>

Ahh, I've just learned my way around MSVC++ a bit better now! Oddly enough,
the difference in executable size between debug and release mode was never
covered in any of my classes.

The release mode version of the executable is down to 164 KB, which is still
a healthy bit larger than the one generated with Dev-C++, but not nearly as
bad as the original version.

Rob

> -----Original Message-----
> From: Matías Pequeño [mailto:ma...@fi...]
> Sent: Monday, September 30, 2002 9:13 PM
> To: Rob
> Subject: Re: [Dev-C++] a small comparison
>
>
> I'm sorry, the word was release,
>
> you're compiling the exe in Debug mode, try compiling it in
> Release mode...
>
> ----- Original Message -----
> From: "Rob" <ro...@us...>
> To: "Dev-C++ List" <dev...@li...>
> Sent: Monday, September 30, 2002 10:53 PM
> Subject: RE: [Dev-C++] a small comparison
>
>
> > Retail mode? I'm not familiar with that term.
> >
> > The process I used was to create a New Win32 Project, selecting console
> > application and checking blank project on the Win32 Application Wizard
> > dialogue. Then I selected Add New Item (.cpp file) and paste the source
> into
> > it.
> >
> > I saved the file, built & compiled.
> >
> > Rob
> >
> > > -----Original Message-----
> > > From: dev...@li...
> > > [mailto:dev...@li...]On Behalf Of Matías
> > > Pequeño
> > > Sent: Monday, September 30, 2002 8:32 PM
> > > To: Dev-C++ List
> > > Subject: Re: [Dev-C++] a small comparison
> > >
> > >
> > > Some tips, be sure you're in retail mode, you're not linking
> > > statically any
> > > unused library and you started a Win32 Console project.
> > > If the size still is the same, I don't have the slighest idea :)
> > >
> > > ----- Original Message -----
> > > From: "Rob" <ro...@us...>
> > > To: "Dev-C++ List" <dev...@li...>
> > > Sent: Monday, September 30, 2002 9:40 PM
> > > Subject: [Dev-C++] a small comparison
> > >
> > >
> > > > This isn't exactly cutting-edge science, but I pass it along
> > > for posterity
> > > > anyway.
> > > >
> > > > I have Dev-C++ and Microsoft Visual C++ .net Standard
> installed on the
> > > same
> > > > Win2K machine here, and compiled the same file in each:
> > > >
> > > > #include <iostream>
> > > > using namespace std;
> > > >
> > > > int main()
> > > > {
> > > > cout << "Doh!";
> > > > return 0;
> > > > }
> > > >
> > > > The difference in size between the .exe files created by the
> > > two programs
> > > > was the curious part.
> > > >
> > > > Microsoft Visual C++ .net Standard ==> 452 KB
> > > > Dev-C++                            ==>  71 KB
> > > >
> > > > It's hardly scientific, based on only one scenario, but I thought it
> was
> > > > interesting.
> > > >
> > > > regards,
> > > > Rob
> > > >
> > > >
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > This sf.net email is sponsored by:ThinkGeek
> > > > Welcome to geek heaven.
> > > > http://thinkgeek.com/sf
> > > > _______________________________________________
> > > > Dev-cpp-users mailing list
> > > > Dev...@li...
> > > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > >
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This sf.net email is sponsored by:ThinkGeek
> > > Welcome to geek heaven.
> > > http://thinkgeek.com/sf
> > > _______________________________________________
> > > Dev-cpp-users mailing list
> > > Dev...@li...
> > > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > Dev-cpp-users mailing list
> > Dev...@li...
> > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> >
>
>

I've been teaching myself C out of a book, and am now putting it into
practice, using Dev-cpp 4.9.0.4 or whatever the second newest release was
(I haven't upgraded yet.)  When trying to compile the attatched program, I
get 3 copies of this error:

"Passing arg 2 to `strncpy' makes integer without pointer cast" (or
something close to it, I can't exactly remember) What is that, and how do I
fix it?  Also (before I got those errors and was able to compile), when I
try to log in inside my program, I get an illegal error that says "FUNK OS
has caused an error in MSVCRT.DLL" and it crashes.  Again, why and how to
fix it?

Along with my program, there is a "userlist.txt" in the same directory that
has "Josh.Lukas.Family." in it.  It's supposed to check for usernames from
this file.  And before anyone asks, I don't understand how to use the debug
program.

Retail mode? I'm not familiar with that term.

The process I used was to create a New Win32 Project, selecting console
application and checking blank project on the Win32 Application Wizard
dialogue. Then I selected Add New Item (.cpp file) and paste the source into
it.

I saved the file, built & compiled.

Rob

> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...]On Behalf Of Matías
> Pequeño
> Sent: Monday, September 30, 2002 8:32 PM
> To: Dev-C++ List
> Subject: Re: [Dev-C++] a small comparison
>
>
> Some tips, be sure you're in retail mode, you're not linking
> statically any
> unused library and you started a Win32 Console project.
> If the size still is the same, I don't have the slighest idea :)
>
> ----- Original Message -----
> From: "Rob" <ro...@us...>
> To: "Dev-C++ List" <dev...@li...>
> Sent: Monday, September 30, 2002 9:40 PM
> Subject: [Dev-C++] a small comparison
>
>
> > This isn't exactly cutting-edge science, but I pass it along
> for posterity
> > anyway.
> >
> > I have Dev-C++ and Microsoft Visual C++ .net Standard installed on the
> same
> > Win2K machine here, and compiled the same file in each:
> >
> > #include <iostream>
> > using namespace std;
> >
> > int main()
> > {
> > cout << "Doh!";
> > return 0;
> > }
> >
> > The difference in size between the .exe files created by the
> two programs
> > was the curious part.
> >
> > Microsoft Visual C++ .net Standard ==> 452 KB
> > Dev-C++                            ==>  71 KB
> >
> > It's hardly scientific, based on only one scenario, but I thought it was
> > interesting.
> >
> > regards,
> > Rob
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > Dev-cpp-users mailing list
> > Dev...@li...
> > TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> >
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

Some tips, be sure you're in retail mode, you're not linking statically any
unused library and you started a Win32 Console project.
If the size still is the same, I don't have the slighest idea :)

----- Original Message -----
From: "Rob" <ro...@us...>
To: "Dev-C++ List" <dev...@li...>
Sent: Monday, September 30, 2002 9:40 PM
Subject: [Dev-C++] a small comparison


> This isn't exactly cutting-edge science, but I pass it along for posterity
> anyway.
>
> I have Dev-C++ and Microsoft Visual C++ .net Standard installed on the
same
> Win2K machine here, and compiled the same file in each:
>
> #include <iostream>
> using namespace std;
>
> int main()
> {
> cout << "Doh!";
> return 0;
> }
>
> The difference in size between the .exe files created by the two programs
> was the curious part.
>
> Microsoft Visual C++ .net Standard ==> 452 KB
> Dev-C++                            ==>  71 KB
>
> It's hardly scientific, based on only one scenario, but I thought it was
> interesting.
>
> regards,
> Rob
>
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

Hello Everybody,

I've just upgraded to 4.9.6.0 
when i start DevC++ i get a popup that refers to 
Errors 2700 --> 2705
Also when i compile HelloWorld.cpp or .c examples by 
themselves they work, but if i use the project feature

as per the introduction in the project popup, they
page default my computer.

               TIA,
               Eric

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com

This isn't exactly cutting-edge science, but I pass it along for posterity
anyway.

I have Dev-C++ and Microsoft Visual C++ .net Standard installed on the same
Win2K machine here, and compiled the same file in each:

#include <iostream>
using namespace std;

int main()
{
	cout << "Doh!";
	return 0;
}

The difference in size between the .exe files created by the two programs
was the curious part.

Microsoft Visual C++ .net Standard ==> 452 KB
Dev-C++                            ==>  71 KB

It's hardly scientific, based on only one scenario, but I thought it was
interesting.

regards,
Rob