dev-cpp-users Mailing List for Dev-C++

-----Original Message-----
From: dev...@li... =
[mailto:dev...@li...]=20
Sent: Saturday, 25 February 2006 3:23 PM
To: dev...@li...
Subject: Dev-cpp-users digest, Vol 1 #2696 - 8 msgs

Send Dev-cpp-users mailing list submissions to
	dev...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
or, via email, send a message with subject or body 'help' to
	dev...@li...

You can reach the person managing the list at
	dev...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Dev-cpp-users digest..."


Today's Topics:

   1. Re: double and float ?? (Per Westermark)
   2. Re: "Anti-spam" mails from UOL (Daniel K. O.)
   3. Re: double and float ?? (Daniel K. O.)
   4. Re: "Anti-spam" mails from UOL (Per Westermark)
   5. Re: double and float ?? (Per Westermark)
   6. Re: "Anti-spam" mails from UOL (Daniel K. O.)
   7. Using mysql/mysql.h (KrowniX ()--())
   8. Re: XP Manifest and Win32 controls (Thierry Pierron)

--__--__--

Message: 1
Date: Fri, 24 Feb 2006 11:12:44 +0100 (CET)
From: Per Westermark <pw...@ia...>
To: Titi Anggono <tia...@ya...>
cc: Dev-cpp user <dev...@li...>
Subject: Re: [Dev-C++] double and float ??

No, you can't use an old c++ manual (or actually C manual).
It must be a broken manual.

The runtime library must know the physical size of the variable to be =
able
to initialize it.

For printf() you send a value. The standard says that functions without =
a
prototype - or variadric functions - should have the variables upgraded
from float to double on call. This makes printf() support float and
double.

However, scanf() doesn't take a float our double. It takes a pointer to =
a
float or double. To perform the assign - it has to look at the
"formatting" parameter to decide what it should assign to.

%f specifies float
%lf specifies double
%Lf specifies long double (when supported)

/Per W

On Thu, 23 Feb 2006, Titi Anggono wrote:

> Hi all,
>
> I tried the following code
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
> #include <stdio.h>
> #include <stdlib.h>
> #include <conio.h>
>
> main(){
>     double a,b;
>     scanf("%f",&a);
>     printf("\n");
>     scanf("%f",&b);
>     printf("\n\n%f   %f",a,b);
>     getch();
>     exit(EXIT_SUCCESS);
> }
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
> I enter any numbers and the output is
> 0.0000   0.00000
> but, when I change the "double" with "float", the code
> gives me the right answer.
>
> Is there any explanation why I can't use "double" with
> "%f" in dev-cpp ? Maybe I use old c++ manual lol. How
> can I print the "double" number ?
>
> Titi
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting =
language
> that extends applications into web and mobile media. Attend the live =
webcast
> and join the prime developer group breaking into this new coding =
territory!
> =
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D110944&bid=3D241720&dat=3D=
121642
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>



--__--__--

Message: 2
Date: Fri, 24 Feb 2006 09:03:00 -0300
From: "Daniel K. O." <dan...@gm...>
To: Per Westermark <pw...@ia...>
CC:  dev...@li...
Subject: Re: [Dev-C++] "Anti-spam" mails from UOL

Per Westermark escreveu:
> Can I assume that a lot of other people gets "anti-spam" registration
> mails from:
>   AntiSpam UOL <mr-...@uo...>
> whenever you post to this list?
>
> If so, please mail their ab...@uo... address and tell them what =
you
> think about expecting mailing list participants to register whenever =
any
> of their email users subscribe to a list just so that _we_ don't have =
to
> see _their_ spam mails...
>  =20
Unfortunately I think this should be handled by the list admins here.=20
The AntiSpam UOL is a service provided for users that opt in for the=20
service, so the fault is solely on the user. He is either too stupid, or =

was trying to piss us off.
I believe UOL policy doesn't allow them to simply turn off the AntiSpam=20
service, and considering that their anti-spam software is dumb enough=20
that it can't identify messages from mailing lists (that IMHO should be=20
silently ignored by their filter), it will be a long battle to convince=20
them to 1) bother a user that pays money, 2) fix their stupid filtering=20
software or 3) convince them that the user is purposely damaging an=20
entire community.

Yeah, I think unsubscribing him from the list is faster. If we only had=20
some admins around here... maybe we can try contacting the SF staff=20
directly and see if they can remove this user from this mailing list.


---
Daniel K. O.



--__--__--

Message: 3
Date: Fri, 24 Feb 2006 09:11:07 -0300
From: "Daniel K. O." <dan...@gm...>
To: Per Westermark <pw...@ia...>
CC: Dev-cpp user <dev...@li...>
Subject: Re: [Dev-C++] double and float ??

Per Westermark escreveu:
> %Lf specifies long double (when supported)
>  =20

Which the MS runtime doesn't seem to support... from my experiences (I=20
don't have the MS compiler, I just asked somebody else to compile some=20
code and send me the program output and some assembly dumps), VC++=20
"demotes" long doubles to plain doubles in printf.

But now that you mentioned %Lf, I would like to confirm with anyone here =

who has VC++; what does happen when trying to printf a long double on=20
VC++? For me, it looks like VC++ tries a "magic" conversion in variadic=20
functions, but if it is true, it may break legit code (when trying to=20
va_arg a long double where a plain double was put).



---
Daniel K. O.



--__--__--

Message: 4
Date: Fri, 24 Feb 2006 13:43:21 +0100 (CET)
From: Per Westermark <pw...@ia...>
To: "Daniel K. O." <dan...@gm...>
cc: dev...@li...
Subject: Re: [Dev-C++] "Anti-spam" mails from UOL

My aim was to get a number of people to show their irritation by
sending complaints to ab...@uo... and telling them that
_they_ are explicitly spamming users.

On the mailing list side, there is nothing sourceforge can do, since =
they
never see these "anti-spam" mails.

UOL have a very broken system that can't correctly detect =
list-originating
mails, despite the huge number of extra fields available in the
mail header:

----------
Precedence: bulk
List-Unsubscribe:
<https://lists.sourceforge.net/lists/listinfo/dev-cpp-users>,

<mailto:dev...@li...?subject=3Dunsubscribe=
>
List-Id: Dev-C++ users mailing list =
<dev-cpp-users.lists.sourceforge.net>
List-Post: <mailto:dev...@li...>
List-Help:
<mailto:dev...@li...?subject=3Dhelp>
List-Subscribe:
<https://lists.sourceforge.net/lists/listinfo/dev-cpp-users>,

<mailto:dev...@li...?subject=3Dsubscribe>
List-Archive:
<http://sourceforge.net/mailarchive/forum.php?forum=3Ddev-cpp-users>
----------

If nothing else, they should at least make sure that the source domain
lists.sourceforge.net was specifically known. It represents a =
significant
number of mailing lists and whatever policy UOL might have, that policy =
is
towards their end users, not towards the mailing lists, i.e. they can =
not
expect to enforce their policies on us by expecting thousands - or tens =
of
thousands of registrations in their system.

The single action of registering to a mailing list is an acceptance from
the end user to consider the list as an accepted sender of mails.

/Per W

On Fri, 24 Feb 2006, Daniel K. O. wrote:

> Per Westermark escreveu:
> > Can I assume that a lot of other people gets "anti-spam" =
registration
> > mails from:
> >   AntiSpam UOL <mr-...@uo...>
> > whenever you post to this list?
> >
> > If so, please mail their ab...@uo... address and tell them what =
you
> > think about expecting mailing list participants to register whenever =
any
> > of their email users subscribe to a list just so that _we_ don't =
have to
> > see _their_ spam mails...
> >
> Unfortunately I think this should be handled by the list admins here.
> The AntiSpam UOL is a service provided for users that opt in for the
> service, so the fault is solely on the user. He is either too stupid, =
or
> was trying to piss us off.
> I believe UOL policy doesn't allow them to simply turn off the =
AntiSpam
> service, and considering that their anti-spam software is dumb enough
> that it can't identify messages from mailing lists (that IMHO should =
be
> silently ignored by their filter), it will be a long battle to =
convince
> them to 1) bother a user that pays money, 2) fix their stupid =
filtering
> software or 3) convince them that the user is purposely damaging an
> entire community.
>
> Yeah, I think unsubscribing him from the list is faster. If we only =
had
> some admins around here... maybe we can try contacting the SF staff
> directly and see if they can remove this user from this mailing list.
>
>
> ---
> Daniel K. O.
>
>





--__--__--

Message: 5
Date: Fri, 24 Feb 2006 13:48:51 +0100 (CET)
From: Per Westermark <pw...@ia...>
To: "Daniel K. O." <dan...@gm...>
cc: Dev-cpp user <dev...@li...>
Subject: Re: [Dev-C++] double and float ??

VC++ doesn't have an long double data type. A long double variable will =
be
8 byte large, just as a double. In short, there will be no problem =
trying
to send a long double parameter to a variadic function. Both sender and
receiver will assume 8 bytes storage size.

It is only code that relies on extra precision and/or range of a long
double that will have problems. For example a numeric algorithm using a
numerically unstable method of solving an equation might diverge with
double numbers while it always have enough precision to converge on a
solution with true long doubles.

/Per W

On Fri, 24 Feb 2006, Daniel K. O. wrote:

> Per Westermark escreveu:
> > %Lf specifies long double (when supported)
> >
>
> Which the MS runtime doesn't seem to support... from my experiences (I
> don't have the MS compiler, I just asked somebody else to compile some
> code and send me the program output and some assembly dumps), VC++
> "demotes" long doubles to plain doubles in printf.
>
> But now that you mentioned %Lf, I would like to confirm with anyone =
here
> who has VC++; what does happen when trying to printf a long double on
> VC++? For me, it looks like VC++ tries a "magic" conversion in =
variadic
> functions, but if it is true, it may break legit code (when trying to
> va_arg a long double where a plain double was put).
>
>
>
> ---
> Daniel K. O.
>
>



--__--__--

Message: 6
Date: Fri, 24 Feb 2006 10:00:01 -0300
From: "Daniel K. O." <dan...@gm...>
To: Per Westermark <pw...@ia...>
CC:  dev...@li...
Subject: Re: [Dev-C++] "Anti-spam" mails from UOL

Per Westermark escreveu:
> My aim was to get a number of people to show their irritation by
> sending complaints to ab...@uo... and telling them that
> _they_ are explicitly spamming users.
>
> On the mailing list side, there is nothing sourceforge can do, since =
they
> never see these "anti-spam" mails.
>  =20

Well, we can at least try. :)
https://sourceforge.net/tracker/index.php?func=3Ddetail&aid=3D1438044&gro=
up_id=3D1&atid=3D200001


And yes, I'll try to contact UOL too - let's hope they listen (and do=20
something about it).

---
Daniel K. O.



--__--__--

Message: 7
Date: Sat, 25 Feb 2006 00:01:51 +0000 (GMT)
From: "KrowniX \(\)--\(\)" <kr...@ya...>
To: dev...@li...
Subject: [Dev-C++] Using mysql/mysql.h

--0-1291976635-1140825711=3D:28970
Content-Type: text/plain; charset=3Diso-8859-1
Content-Transfer-Encoding: 8bit

Hello,
  =20
  How I use the mysql library in dev-c++?? these are the error messages =
that i have.
  =20
  ompilador: Default compiler
Executando  g++.exe...
g++.exe "C:\resources\source_codes\mysql.cpp" -o =
"C:\resources\source_codes\mysql.exe"   -lmysqlclient -lsocket -lnsl  =
-I"C:\Dev-Cpp\lib\gcc\mingw32\3.4.2\include"  =
-I"C:\Dev-Cpp\include\c++\3.4.2\backward"  =
-I"C:\Dev-Cpp\include\c++\3.4.2\mingw32"  =
-I"C:\Dev-Cpp\include\c++\3.4.2"  -I"C:\Dev-Cpp\include"   =
-L"C:\Dev-Cpp\lib" -lm=20
In file included from C:/Dev-Cpp/include/mysql/mysql.h:57,
                 from C:\resources\source_codes\mysql.cpp:2:
C:/Dev-Cpp/include/mysql/mysql_com.h:155: error: `SOCKET' does not name =
a type
C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: `SOCKET' was not =
declared in this scope
C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: expected =
primary-expression before "const"
C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: expected =
primary-expression before "unsigned"
C:/Dev-Cpp/include/mysql/mysql_com.h:300: error: expected =
primary-expression before "unsigned"
C:/Dev-Cpp/include/mysql/mysql_com.h:300: error: initializer expression =
list treated as compound expression
  Execu=E7=E3o terminada


	=09
---------------------------------
 Yahoo! doce lar. Fa=E7a do Yahoo! sua homepage.
--0-1291976635-1140825711=3D:28970
Content-Type: text/html; charset=3Diso-8859-1
Content-Transfer-Encoding: 8bit

<div>Hello,</div>  <div>&nbsp;</div>  <div>How I use the mysql library =
in dev-c++?? these are the error messages that i have.</div>  =
<div>&nbsp;</div>  <div>ompilador: Default compiler<BR>Executando&nbsp; =
g++.exe...<BR>g++.exe "C:\resources\source_codes\mysql.cpp" -o =
"C:\resources\source_codes\mysql.exe"&nbsp;&nbsp; -lmysqlclient -lsocket =
-lnsl&nbsp; -I"C:\Dev-Cpp\lib\gcc\mingw32\3.4.2\include"&nbsp; =
-I"C:\Dev-Cpp\include\c++\3.4.2\backward"&nbsp; =
-I"C:\Dev-Cpp\include\c++\3.4.2\mingw32"&nbsp; =
-I"C:\Dev-Cpp\include\c++\3.4.2"&nbsp; =
-I"C:\Dev-Cpp\include"&nbsp;&nbsp; -L"C:\Dev-Cpp\lib" -lm <BR>In file =
included from =
C:/Dev-Cpp/include/mysql/mysql.h:57,<BR>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nb=
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; from =
C:\resources\source_codes\mysql.cpp:2:<BR>C:/Dev-Cpp/include/mysql/mysql_=
com.h:155: error: `SOCKET' does not name a =
type<BR>C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: `SOCKET' was =
not declared in this
 scope<BR>C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: expected =
primary-expression before =
"const"<BR>C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: expected =
primary-expression before =
"unsigned"<BR>C:/Dev-Cpp/include/mysql/mysql_com.h:300: error: expected =
primary-expression before =
"unsigned"<BR>C:/Dev-Cpp/include/mysql/mysql_com.h:300: error: =
initializer expression list treated as compound expression</div>  =
<div>Execu=E7=E3o terminada<BR></div><p>
		<hr size=3D1>=20
Yahoo! doce lar. <a =
href=3D"http://us.rd.yahoo.com/mail/br/tagline/homepage_set/*http://br.ya=
hoo.com/homepageset.html">Fa=E7a do Yahoo! sua homepage.</a>
--0-1291976635-1140825711=3D:28970--


--__--__--

Message: 8
Date: Sat, 25 Feb 2006 00:09:03 -0400
From: "Thierry Pierron" <tpi...@gm...>
To: dev...@li...
Subject: [Dev-C++] Re: XP Manifest and Win32 controls

Argh, found the answer ...

You have to link your prog against libcomctl32.a, includes a file
"commctrl.h" and call InitCommonControls() before everything else.

I suppose for supporting Vista, we'll have to kill a chicken and drink
it's blood when the moon is full, while using black magic for
programming :-(

2006/2/23, Thierry Pierron <tpi...@gm...>:
> Hi all,
>
> I'm just trying to use Win32 common controls in Dev-cpp with "Support
> Windows XP themes" activated in project's options. Actually, I simply
> use the Win32 application template, where I added following lines of
> code, just after main window creation :
>
>         HWND button =3D3D CreateWindowEx(
>                 0,
>                 "button", "Cancel",
>                 WS_CHILD | WS_VISIBLE | BS_PUSHBUTTON,
>                 100, 200, 100, 20,
>                 hwnd, (HMENU) IDOK,
>                 hThisInstance,
>                 NULL
>         );
>
> Actually, that code works (i see push button) when XP styles are
> desactivated. When I activate that option, the CreateWindowEx fails
> with error "The class does not exist".
>
> Sorry, but I'm new to win32 programming, and I have to maintain a old
> app. If someone has a little idea of what can solve that issue, that
> would be fine !
> --
> Thierry Pierron
>


--
Thierry Pierron



--__--__--

_______________________________________________
Dev-cpp-users mailing list
Dev...@li...
TO UNSUBSCRIBE: http://www.noicys.cjb.net/devcpp/ub.htm
https://lists.sourceforge.net/lists/listinfo/dev-cpp-users


End of Dev-cpp-users Digest

Hi,

> I've been using DevC++ on windows for a while (few months). I switched on Linux (dual boot) and I
> want to use it here too. I saw it's available on Bloodshed's CD. Is it also downloadable somewhere?
> I searched the site but haven't find download link for that. (sorry if it's a stupid question)

I suggest You to download Code::Blocks, it's very similar, but much more 
up to date.
http://www.codeblocks.org

/Aurimas

I've been reading your mails since I got DevC++ and now I have a question.
I've been using DevC++ on windows for a while (few months). I switched on Linux (dual boot) and I
want to use it here too. I saw it's available on Bloodshed's CD. Is it also downloadable somewhere?
I searched the site but haven't find download link for that. (sorry if it's a stupid question)

Thanks, Infinity


-- 
Odaberite XXLadsl - o=e8ekuju vas ve=e6e brzine uz iste cijene,
priklju=e8ak za samo 1 kunu i paketi ve=e6 od 99 kuna mjese=e8no."

Halo Friends,
   
  I need some help, some ideas from you........
  I want to open a file, and read the lines. The file contents of 2 columns, the known parameter is at the first column and I want to get the parameter at the second column. But the case is that the first column´s parameters are strings with white-spaces (space), and there are tabs to the second column. If there is no white-spaces, I had done it succesfully, by doing: 
   
  while (! myfile.eof()){
         myfile >> column1 >> column2 >> endl; 
         if (column1 == index1column1){
             index1column2 = column2;
         }
         else if (column1 == index2column1){
             index2column2 = column2;
        }
  }
   
  so, how is it then if the case of string with whitespaces?
  thank you very much for your help.
   
  regards,
   
  nima
   
   

		
---------------------------------
Yahoo! Mail
Bring photos to life! New PhotoMail  makes sharing a breeze. 

Marek Mal wrote:
> The library files "dismgc.a" and "dismgc_d.a" which are in mentioned zip 
> archive rename
> to "libdismgc.a" and "libdismgc_d.a" and put into the directory 
> "...Dev-Cpp\lib".
> The headers files "dislin.h" and "dislin_d.h" copy into the directory 
> "...Dev-Cpp\include" thats
> the end of installation, it's easy isn't it :))


Sorry for the late reply, my net's conked out. There's no need for
renaming files or disturbing Dev-C++'s includes.

First place dislin.h and dismgc.a in the directory of your source file(s).

If you are not using a project, then on a DOS prompt, navigate to the
directory and give the following command. Its way simpler than messing
with the library/linker options. Here, pss.cpp is my code and pss.exe is
the output file. You may have to add g++.exe to your PATH.

g++ -o pss.exe pss.cpp -L. dismgc.a -mwindows

If you are using a project, then go to project options and in the linker
tab, add the two parameters "dismgc.a" and "-mwindows" (without the
quotes). I'm not sure about the minus sign. Please check that.

If you are making a console app, you will have to make use of argc[] and
argv because DISLIN creates win32 apps (the mwindows switch takes cares
of user32, gdi32) which don't permit console IO
using printf()/scanf() or cout/cin.

-- 
Rohit V. Bhute
http://rvbhute.freelinuxhost.com/wordpress

Hi,

> How I use the mysql library in dev-c++?? these are the error messages 
> that i have.

Before including mysql.h you need to include windows.h
#include<windows.h>

/Aurimas

Argh, found the answer ...

You have to link your prog against libcomctl32.a, includes a file
"commctrl.h" and call InitCommonControls() before everything else.

I suppose for supporting Vista, we'll have to kill a chicken and drink
it's blood when the moon is full, while using black magic for
programming :-(

2006/2/23, Thierry Pierron <tpi...@gm...>:
> Hi all,
>
> I'm just trying to use Win32 common controls in Dev-cpp with "Support
> Windows XP themes" activated in project's options. Actually, I simply
> use the Win32 application template, where I added following lines of
> code, just after main window creation :
>
>         HWND button =3D CreateWindowEx(
>                 0,
>                 "button", "Cancel",
>                 WS_CHILD | WS_VISIBLE | BS_PUSHBUTTON,
>                 100, 200, 100, 20,
>                 hwnd, (HMENU) IDOK,
>                 hThisInstance,
>                 NULL
>         );
>
> Actually, that code works (i see push button) when XP styles are
> desactivated. When I activate that option, the CreateWindowEx fails
> with error "The class does not exist".
>
> Sorry, but I'm new to win32 programming, and I have to maintain a old
> app. If someone has a little idea of what can solve that issue, that
> would be fine !
> --
> Thierry Pierron
>


--
Thierry Pierron

Hello,
   
  How I use the mysql library in dev-c++?? these are the error messages that i have.
   
  ompilador: Default compiler
Executando  g++.exe...
g++.exe "C:\resources\source_codes\mysql.cpp" -o "C:\resources\source_codes\mysql.exe"   -lmysqlclient -lsocket -lnsl  -I"C:\Dev-Cpp\lib\gcc\mingw32\3.4.2\include"  -I"C:\Dev-Cpp\include\c++\3.4.2\backward"  -I"C:\Dev-Cpp\include\c++\3.4.2\mingw32"  -I"C:\Dev-Cpp\include\c++\3.4.2"  -I"C:\Dev-Cpp\include"   -L"C:\Dev-Cpp\lib" -lm 
In file included from C:/Dev-Cpp/include/mysql/mysql.h:57,
                 from C:\resources\source_codes\mysql.cpp:2:
C:/Dev-Cpp/include/mysql/mysql_com.h:155: error: `SOCKET' does not name a type
C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: `SOCKET' was not declared in this scope
C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: expected primary-expression before "const"
C:/Dev-Cpp/include/mysql/mysql_com.h:299: error: expected primary-expression before "unsigned"
C:/Dev-Cpp/include/mysql/mysql_com.h:300: error: expected primary-expression before "unsigned"
C:/Dev-Cpp/include/mysql/mysql_com.h:300: error: initializer expression list treated as compound expression
  Execução terminada


		
---------------------------------
 Yahoo! doce lar. Faça do Yahoo! sua homepage.

Per Westermark escreveu:
> My aim was to get a number of people to show their irritation by
> sending complaints to ab...@uo... and telling them that
> _they_ are explicitly spamming users.
>
> On the mailing list side, there is nothing sourceforge can do, since they
> never see these "anti-spam" mails.
>   

Well, we can at least try. :)
https://sourceforge.net/tracker/index.php?func=detail&aid=1438044&group_id=1&atid=200001


And yes, I'll try to contact UOL too - let's hope they listen (and do 
something about it).

---
Daniel K. O.

VC++ doesn't have an long double data type. A long double variable will be
8 byte large, just as a double. In short, there will be no problem trying
to send a long double parameter to a variadic function. Both sender and
receiver will assume 8 bytes storage size.

It is only code that relies on extra precision and/or range of a long
double that will have problems. For example a numeric algorithm using a
numerically unstable method of solving an equation might diverge with
double numbers while it always have enough precision to converge on a
solution with true long doubles.

/Per W

On Fri, 24 Feb 2006, Daniel K. O. wrote:

> Per Westermark escreveu:
> > %Lf specifies long double (when supported)
> >
>
> Which the MS runtime doesn't seem to support... from my experiences (I
> don't have the MS compiler, I just asked somebody else to compile some
> code and send me the program output and some assembly dumps), VC++
> "demotes" long doubles to plain doubles in printf.
>
> But now that you mentioned %Lf, I would like to confirm with anyone here
> who has VC++; what does happen when trying to printf a long double on
> VC++? For me, it looks like VC++ tries a "magic" conversion in variadic
> functions, but if it is true, it may break legit code (when trying to
> va_arg a long double where a plain double was put).
>
>
>
> ---
> Daniel K. O.
>
>

My aim was to get a number of people to show their irritation by
sending complaints to ab...@uo... and telling them that
_they_ are explicitly spamming users.

On the mailing list side, there is nothing sourceforge can do, since they
never see these "anti-spam" mails.

UOL have a very broken system that can't correctly detect list-originating
mails, despite the huge number of extra fields available in the
mail header:

----------
Precedence: bulk
List-Unsubscribe:
<https://lists.sourceforge.net/lists/listinfo/dev-cpp-users>,

<mailto:dev...@li...?subject=unsubscribe>
List-Id: Dev-C++ users mailing list <dev-cpp-users.lists.sourceforge.net>
List-Post: <mailto:dev...@li...>
List-Help:
<mailto:dev...@li...?subject=help>
List-Subscribe:
<https://lists.sourceforge.net/lists/listinfo/dev-cpp-users>,

<mailto:dev...@li...?subject=subscribe>
List-Archive:
<http://sourceforge.net/mailarchive/forum.php?forum=dev-cpp-users>
----------

If nothing else, they should at least make sure that the source domain
lists.sourceforge.net was specifically known. It represents a significant
number of mailing lists and whatever policy UOL might have, that policy is
towards their end users, not towards the mailing lists, i.e. they can not
expect to enforce their policies on us by expecting thousands - or tens of
thousands of registrations in their system.

The single action of registering to a mailing list is an acceptance from
the end user to consider the list as an accepted sender of mails.

/Per W

On Fri, 24 Feb 2006, Daniel K. O. wrote:

> Per Westermark escreveu:
> > Can I assume that a lot of other people gets "anti-spam" registration
> > mails from:
> >   AntiSpam UOL <mr-...@uo...>
> > whenever you post to this list?
> >
> > If so, please mail their ab...@uo... address and tell them what you
> > think about expecting mailing list participants to register whenever any
> > of their email users subscribe to a list just so that _we_ don't have to
> > see _their_ spam mails...
> >
> Unfortunately I think this should be handled by the list admins here.
> The AntiSpam UOL is a service provided for users that opt in for the
> service, so the fault is solely on the user. He is either too stupid, or
> was trying to piss us off.
> I believe UOL policy doesn't allow them to simply turn off the AntiSpam
> service, and considering that their anti-spam software is dumb enough
> that it can't identify messages from mailing lists (that IMHO should be
> silently ignored by their filter), it will be a long battle to convince
> them to 1) bother a user that pays money, 2) fix their stupid filtering
> software or 3) convince them that the user is purposely damaging an
> entire community.
>
> Yeah, I think unsubscribing him from the list is faster. If we only had
> some admins around here... maybe we can try contacting the SF staff
> directly and see if they can remove this user from this mailing list.
>
>
> ---
> Daniel K. O.
>
>

Per Westermark escreveu:
> %Lf specifies long double (when supported)
>   

Which the MS runtime doesn't seem to support... from my experiences (I 
don't have the MS compiler, I just asked somebody else to compile some 
code and send me the program output and some assembly dumps), VC++ 
"demotes" long doubles to plain doubles in printf.

But now that you mentioned %Lf, I would like to confirm with anyone here 
who has VC++; what does happen when trying to printf a long double on 
VC++? For me, it looks like VC++ tries a "magic" conversion in variadic 
functions, but if it is true, it may break legit code (when trying to 
va_arg a long double where a plain double was put).



---
Daniel K. O.

Per Westermark escreveu:
> Can I assume that a lot of other people gets "anti-spam" registration
> mails from:
>   AntiSpam UOL <mr-...@uo...>
> whenever you post to this list?
>
> If so, please mail their ab...@uo... address and tell them what you
> think about expecting mailing list participants to register whenever any
> of their email users subscribe to a list just so that _we_ don't have to
> see _their_ spam mails...
>   
Unfortunately I think this should be handled by the list admins here. 
The AntiSpam UOL is a service provided for users that opt in for the 
service, so the fault is solely on the user. He is either too stupid, or 
was trying to piss us off.
I believe UOL policy doesn't allow them to simply turn off the AntiSpam 
service, and considering that their anti-spam software is dumb enough 
that it can't identify messages from mailing lists (that IMHO should be 
silently ignored by their filter), it will be a long battle to convince 
them to 1) bother a user that pays money, 2) fix their stupid filtering 
software or 3) convince them that the user is purposely damaging an 
entire community.

Yeah, I think unsubscribing him from the list is faster. If we only had 
some admins around here... maybe we can try contacting the SF staff 
directly and see if they can remove this user from this mailing list.


---
Daniel K. O.

No, you can't use an old c++ manual (or actually C manual).
It must be a broken manual.

The runtime library must know the physical size of the variable to be able
to initialize it.

For printf() you send a value. The standard says that functions without a
prototype - or variadric functions - should have the variables upgraded
from float to double on call. This makes printf() support float and
double.

However, scanf() doesn't take a float our double. It takes a pointer to a
float or double. To perform the assign - it has to look at the
"formatting" parameter to decide what it should assign to.

%f specifies float
%lf specifies double
%Lf specifies long double (when supported)

/Per W

On Thu, 23 Feb 2006, Titi Anggono wrote:

> Hi all,
>
> I tried the following code
> ============================
> #include <stdio.h>
> #include <stdlib.h>
> #include <conio.h>
>
> main(){
>     double a,b;
>     scanf("%f",&a);
>     printf("\n");
>     scanf("%f",&b);
>     printf("\n\n%f   %f",a,b);
>     getch();
>     exit(EXIT_SUCCESS);
> }
> ==============================
> I enter any numbers and the output is
> 0.0000   0.00000
> but, when I change the "double" with "float", the code
> gives me the right answer.
>
> Is there any explanation why I can't use "double" with
> "%f" in dev-cpp ? Maybe I use old c++ manual lol. How
> can I print the "double" number ?
>
> Titi
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live webcast
> and join the prime developer group breaking into this new coding territory!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

Hi all,

I tried the following code
============================
#include <stdio.h>
#include <stdlib.h>
#include <conio.h>

main(){
    double a,b;
    scanf("%f",&a);
    printf("\n");
    scanf("%f",&b);
    printf("\n\n%f   %f",a,b);
    getch();
    exit(EXIT_SUCCESS);   
}
==============================
I enter any numbers and the output is
0.0000   0.00000
but, when I change the "double" with "float", the code
gives me the right answer.

Is there any explanation why I can't use "double" with
"%f" in dev-cpp ? Maybe I use old c++ manual lol. How
can I print the "double" number ?

Titi

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Hi all,

I'm just trying to use Win32 common controls in Dev-cpp with "Support
Windows XP themes" activated in project's options. Actually, I simply
use the Win32 application template, where I added following lines of
code, just after main window creation :

=09HWND button =3D CreateWindowEx(
=09=090,
=09=09"button", "Cancel",
=09=09WS_CHILD | WS_VISIBLE | BS_PUSHBUTTON,
=09=09100, 200, 100, 20,
=09=09hwnd, (HMENU) IDOK,
=09=09hThisInstance,
=09=09NULL
=09);

Actually, that code works (i see push button) when XP styles are
desactivated. When I activate that option, the CreateWindowEx fails
with error "The class does not exist".

Sorry, but I'm new to win32 programming, and I have to maintain a old
app. If someone has a little idea of what can solve that issue, that
would be fine !
--
Thierry Pierron

Hi Derek and all others,

the README.WIN instructions are useless  in connection with the
"DISLIN + DEV-C++ (v. 4.9.9.2)" problem. I found out the right solution o=
f=20
this
problem and here it is.

->>1)
Download dl_90_mg.zip from ftp://ftp.gwdg.de/pub/grafik/dislin/windows

->>2)

The library files "dismgc.a" and "dismgc_d.a" which are in mentioned zip=20
archive rename
to "libdismgc.a" and "libdismgc_d.a" and put into the directory=20
"...Dev-Cpp\lib".
The headers files "dislin.h" and "dislin_d.h" copy into the directory=20
"...Dev-Cpp\include" thats
the end of installation, it's easy isn't it :))

->>3)

Every Dev-C++ project in which is Dislin used, must be linked with=20
parameters

  -ldismgc -lgdi32
  or
  -ldismgc_d  -lgdi32 in case of using  data type DOUBLE. In that case mu=
st=20
be included header "dislin_d.h" too.

Above mentioned parameters must be written into the field=20
"Project->Project Options->Parameters->Linker" in mentioned
order !

     That is all


         Marek




On Thu, 23 Feb 2006 05:10 +0000 (GMT Standard Time), Derek Clarke=20
<de...@ci...> wrote:

> Without going through it all myself, as far as I can see you just
> download dl_90_mg.zip from ftp://ftp.gwdg.de/pub/grafik/dislin/windows/
> then follow the installation instructions in
> ftp://ftp.gwdg.de/pub/grafik/dislin/windows/README.WIN
>
> In article <ops5apllpgazybmd@localhost>, ma...@sc...
> (=3D?windows-1250?Q?Marek_Mal=3DFD?=3D) wrote:
>>
>> Hi,
>> does anybody use DISLIN together with Dev-C++ environment ?
>>
>> http://www.mps.mpg.de/dislin/overview.html
>>
>> Dev-C++ uses (MingW C/C++) and I know, that
>> exist distribution of DISLIN for MingW so
>> I hope, that it is possible to use DISLIN together
>> with Dev-C++ but I don't know how. I need some
>> dislin library file like "libdislin.a" which I could  put into
>> the Dev-C++\lib directory...
>>
>> Could somebody help me with this problem ?
>>
>>
>>           Marek
>>
>>
>> -------------------------------------------------------
>> This SF.net email is sponsored by: Splunk Inc. Do you grep through
>> log files
>> for problems?  Stop!  Download the new AJAX search engine that makes
>> searching your log files as easy as surfing the  web.  DOWNLOAD
>> SPLUNK!
>> http://sel.as-us.falkag.net/sel?cmdlnk&kid=103432&bid#0486&dat=121642
>> _______________________________________________
>> Dev-cpp-users mailing list
>> Dev...@li...
>> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
>> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>>

Thanks but it doesn't work.

The errors  are the same for  this case

#include <c:/Dev-cpp/include/koolplot.h>

as for this case

#include <koolplot.h>

as for this case

#include "c:/Dev-cpp/include/koolplot.h"

as for case

#include "koolplot.h"

When I substitut line

const double NOPLOT =3D 0; nan(""); // A point of that value will not be=20
plotted

with line:

const double NOPLOT =3D 0;//nan(""); // A point of that value will not be=
=20
plotted

in koolplot.h I obtain errors which depend ONLY on LINKED LIBRARIES.



in situation

1) -lkoolplot

there are linker errors like this:
   [Linker error] undefined reference to=20
`std::__default_alloc_template<true, 0>::deallocate(void*, unsigned int)'
   [Linker error] undefined reference to=20
`std::__default_alloc_template<true, 0>::deallocate(void*, unsigned int)'
   [Linker error] undefined reference to `initwindow'
     [Linker error] undefined reference to `cleardevice'
      [Linker error] undefined reference to `swapbuffers'

in situation

2) -lkoolplot -lbgi
   [Linker error] undefined reference to=20
`std::__default_alloc_template<true, 0>::deallocate(void*, unsigned int)'
     [Linker error] undefined reference to `swapbuffers'
   [Linker error] undefined reference to `CreatePen@12'
   [Linker error] undefined reference to `SelectObject@8'



in situation

3) -lkoolplot -lbgi -lgdi32

there are linker errors like this:
   [Linker error] undefined reference to `std::string::_M_check(unsigned=20
int) const'
   [Linker error] undefined reference to `swapbuffers'
   [Linker error] undefined reference to=20
`std::__default_alloc_template<true, 0>::deallocate(void*, unsigned int)'


The best situation is 3) but it still not OK.

In my opinion the main reason for which KOOLPLOT works with "Quincy 2005"=
=20
and
doesn't work with "Dev-C++ (v. 4.9.9.2)" is, that Quincy uses "WinBGIm=20
(v.6.0)"
and "Dev-C++ (v. 4.9.9.2)" works well with "WinBGIm (v.3.52)". I think
that current version of KOOLPLOT is not compatible with this older versio=
n
WinBGIm. I tried used "WinBGIm (v.6.0)" together with "Dev-C++ (v.=20
4.9.9.2)"
for compiling very easy sources which were compiled with "WinBGIm (v.3.52=
)"
withot problems but there were errors. This separate problem I sent to th=
is
discussion formum but nobody adviced me what to do.

Quincy, Koolplot and WinBGIm v. 6.0(include sources) are available here:

http://www.codecutter.net/tools/winbgim



WinBGIm (v.3.52)(include sources) is available here:

http://www14.brinkster.com/aditsu/console


If somebody will have success in problems

1) Make compatible

"Dev-C++ (v. 4.9.9.2)" with  "WinBGIm (v.6.0)"

2) Make compatible

"Dev-C++ (v. 4.9.9.2)" with current version of Koolplot


Please send mee modified files ( winbgim.h,  libbgi.a, ...) or send me=20
method
how he achieve his success.

    Thanks

        Marek









On Wed, 22 Feb 2006 16:55:30 +0100 (CET), Per Westermark=20
<pw...@ia...> wrote:

> The sample line:
>        #include <sub_dir>/<koolplot.h>
> should be:
>        #include <sub_dir/koolplot.h>
>
> /pwm
>
> On Wed, 22 Feb 2006, Guillermo Gutierrez wrote:
>
>> hello,
>> if you placed the include files in the dev-cpp include directory, you=20
>> might want to try replacing the "'s with <>'s.
>>
>> example:
>>
>> change
>> 	#include "koolplot.h"
>> to
>> 	#include <koolplot.h>
>>
>> if you placed them in a subdirectory, then make it:
>>
>> 	#include <sub_dir>/<koolplot.h>
>>
>> hope this helps some.
>>
>> Guillermo
>>
>> -----Original Message-----
>> From: dev...@li...=20
>> [mailto:dev...@li...]On Behalf Of Marek=20
>> Mal=FD
>> Sent: Saturday, February 18, 2006 6:25 PM
>> To: dev...@li...
>> Subject: [Dev-C++] Does anybody uses KOOLPLOT together with DEV-C++ ?
>>
>>
>> Does anybody uses KOOLPLOT together with Dev-C++ ?
>>
>> Hi,
>>
>> I'am using  Dev-C++  v. 4.9.9.2.
>>
>> Since I've downloaded actual WinBGIm files from here
>>
>> http://www14.brinkster.com/aditsu/console
>>
>> I have no problems with WinBGIm graphics used together with  current
>> Dev-C++ version.
>>
>> I have just found out that exist C/C++ plotting library named Kooplot
>> which uses WinBGIm graphics - see this page:
>>
>> http://www.codecutter.net/tools/koolplot/index.html
>>
>> I have copied files  koolplot.h, Plotdata.h, and  Plotstream.h to
>> Dev-C++ include directory and
>> libkoolplot.a to Dev-C++ lib directory as it is written in the above
>> mentioned page, but
>> I'm not able to compile this easy example - some compiler or linker=20
>> errors
>> appears...
>>
>> #include "koolplot.h"
>> int main()
>> {
>>   Plotdata x(-360, 360), y =3D sin(x) + 3*x;
>>   plot(x, y);
>>    return 0;
>> }
>>
>> Maybe some settings of Dev-C++ are necessary ...
>> Could anyone help me ?
>>
>>       Marek
>>
>>
>> -------------------------------------------------------
>> This SF.net email is sponsored by: Splunk Inc. Do you grep through log=
=20
>> files
>> for problems?  Stop!  Download the new AJAX search engine that makes
>> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK=
!
>> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=103432&bid#0486&dat=121642
>> _______________________________________________
>> Dev-cpp-users mailing list
>> Dev...@li...
>> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log=20
> files
> for problems?  Stop!  Download the new AJAX search engine that makes
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=103432&bid#0486&dat=12164=
2
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

I just delete the bloody "anti-spam" registration email,


I should get a C++ project going




----- Original Message -----
From: Per Westermark <pw...@ia...>
To: <dev...@li...>
Sent: Thursday, February 23, 2006 5:32 AM
Subject: [Dev-C++] "Anti-spam" mails from UOL


Can I assume that a lot of other people gets "anti-spam" registration
mails from:
  AntiSpam UOL <mr-...@uo...>
whenever you post to this list?

If so, please mail their ab...@uo... address and tell them what you
think about expecting mailing list participants to register whenever any
of their email users subscribe to a list just so that _we_ don't have to
see _their_ spam mails...

/Per W





-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Dev-cpp-users mailing list
Dev...@li...
TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

Can I assume that a lot of other people gets "anti-spam" registration
mails from:
  AntiSpam UOL <mr-...@uo...>
whenever you post to this list?

If so, please mail their ab...@uo... address and tell them what you
think about expecting mailing list participants to register whenever any
of their email users subscribe to a list just so that _we_ don't have to
see _their_ spam mails...

/Per W

d2hvb3BzISEhIQ0KeWVzLCB5b3UgYXJlIG1vc3QgZGVmaW5pdGVseSBjb3JyZWN0IHNpci4gDQoN
CnRoYW5rIHlvdSB2ZXJ5IG11Y2guIDopDQoNCi0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0tDQpG
cm9tOiBQZXIgV2VzdGVybWFyayBbbWFpbHRvOnB3bUBpYXBldHVzLm5lYWIubmV0XQ0KU2VudDog
V2VkbmVzZGF5LCBGZWJydWFyeSAyMiwgMjAwNiA3OjU2IEFNDQpUbzogR3VpbGxlcm1vIEd1dGll
cnJleg0KQ2M6IE1hcmVrIE1hbMO9OyBkZXYtY3BwLXVzZXJzQGxpc3RzLnNvdXJjZWZvcmdlLm5l
dA0KU3ViamVjdDogUkU6IFtEZXYtQysrXSBEb2VzIGFueWJvZHkgdXNlcyBLT09MUExPVCB0b2dl
dGhlciB3aXRoIERFVi1DKysNCj8NCg0KDQpUaGUgc2FtcGxlIGxpbmU6DQogICAgICAgI2luY2x1
ZGUgPHN1Yl9kaXI+Lzxrb29scGxvdC5oPg0Kc2hvdWxkIGJlOg0KICAgICAgICNpbmNsdWRlIDxz
dWJfZGlyL2tvb2xwbG90Lmg+DQoNCi9wd20NCg0KT24gV2VkLCAyMiBGZWIgMjAwNiwgR3VpbGxl
cm1vIEd1dGllcnJleiB3cm90ZToNCg0KPiBoZWxsbywNCj4gaWYgeW91IHBsYWNlZCB0aGUgaW5j
bHVkZSBmaWxlcyBpbiB0aGUgZGV2LWNwcCBpbmNsdWRlIGRpcmVjdG9yeSwgeW91IG1pZ2h0IHdh
bnQgdG8gdHJ5IHJlcGxhY2luZyB0aGUgIidzIHdpdGggPD4ncy4NCj4NCj4gZXhhbXBsZToNCj4N
Cj4gY2hhbmdlDQo+IAkjaW5jbHVkZSAia29vbHBsb3QuaCINCj4gdG8NCj4gCSNpbmNsdWRlIDxr
b29scGxvdC5oPg0KPg0KPiBpZiB5b3UgcGxhY2VkIHRoZW0gaW4gYSBzdWJkaXJlY3RvcnksIHRo
ZW4gbWFrZSBpdDoNCj4NCj4gCSNpbmNsdWRlIDxzdWJfZGlyPi88a29vbHBsb3QuaD4NCj4NCj4g
aG9wZSB0aGlzIGhlbHBzIHNvbWUuDQo+DQo+IEd1aWxsZXJtbw0KPg0KPiAtLS0tLU9yaWdpbmFs
IE1lc3NhZ2UtLS0tLQ0KPiBGcm9tOiBkZXYtY3BwLXVzZXJzLWFkbWluQGxpc3RzLnNvdXJjZWZv
cmdlLm5ldCBbbWFpbHRvOmRldi1jcHAtdXNlcnMtYWRtaW5AbGlzdHMuc291cmNlZm9yZ2UubmV0
XU9uIEJlaGFsZiBPZiBNYXJlayBNYWzDvQ0KPiBTZW50OiBTYXR1cmRheSwgRmVicnVhcnkgMTgs
IDIwMDYgNjoyNSBQTQ0KPiBUbzogZGV2LWNwcC11c2Vyc0BsaXN0cy5zb3VyY2Vmb3JnZS5uZXQN
Cj4gU3ViamVjdDogW0Rldi1DKytdIERvZXMgYW55Ym9keSB1c2VzIEtPT0xQTE9UIHRvZ2V0aGVy
IHdpdGggREVWLUMrKyA/DQo+DQo+DQo+IERvZXMgYW55Ym9keSB1c2VzIEtPT0xQTE9UIHRvZ2V0
aGVyIHdpdGggRGV2LUMrKyA/DQo+DQo+IEhpLA0KPg0KPiBJJ2FtIHVzaW5nICBEZXYtQysrICB2
LiA0LjkuOS4yLg0KPg0KPiBTaW5jZSBJJ3ZlIGRvd25sb2FkZWQgYWN0dWFsIFdpbkJHSW0gZmls
ZXMgZnJvbSBoZXJlDQo+DQo+IGh0dHA6Ly93d3cxNC5icmlua3N0ZXIuY29tL2FkaXRzdS9jb25z
b2xlDQo+DQo+IEkgaGF2ZSBubyBwcm9ibGVtcyB3aXRoIFdpbkJHSW0gZ3JhcGhpY3MgdXNlZCB0
b2dldGhlciB3aXRoICBjdXJyZW50DQo+IERldi1DKysgdmVyc2lvbi4NCj4NCj4gSSBoYXZlIGp1
c3QgZm91bmQgb3V0IHRoYXQgZXhpc3QgQy9DKysgcGxvdHRpbmcgbGlicmFyeSBuYW1lZCBLb29w
bG90DQo+IHdoaWNoIHVzZXMgV2luQkdJbSBncmFwaGljcyAtIHNlZSB0aGlzIHBhZ2U6DQo+DQo+
IGh0dHA6Ly93d3cuY29kZWN1dHRlci5uZXQvdG9vbHMva29vbHBsb3QvaW5kZXguaHRtbA0KPg0K
PiBJIGhhdmUgY29waWVkIGZpbGVzICBrb29scGxvdC5oLCBQbG90ZGF0YS5oLCBhbmQgIFBsb3Rz
dHJlYW0uaCB0bw0KPiBEZXYtQysrIGluY2x1ZGUgZGlyZWN0b3J5IGFuZA0KPiBsaWJrb29scGxv
dC5hIHRvIERldi1DKysgbGliIGRpcmVjdG9yeSBhcyBpdCBpcyB3cml0dGVuIGluIHRoZSBhYm92
ZQ0KPiBtZW50aW9uZWQgcGFnZSwgYnV0DQo+IEknbSBub3QgYWJsZSB0byBjb21waWxlIHRoaXMg
ZWFzeSBleGFtcGxlIC0gc29tZSBjb21waWxlciBvciBsaW5rZXIgZXJyb3JzDQo+IGFwcGVhcnMu
Li4NCj4NCj4gI2luY2x1ZGUgImtvb2xwbG90LmgiDQo+IGludCBtYWluKCkNCj4gew0KPiAgIFBs
b3RkYXRhIHgoLTM2MCwgMzYwKSwgeSA9IHNpbih4KSArIDMqeDsNCj4gICBwbG90KHgsIHkpOw0K
PiAgICByZXR1cm4gMDsNCj4gfQ0KPg0KPiBNYXliZSBzb21lIHNldHRpbmdzIG9mIERldi1DKysg
YXJlIG5lY2Vzc2FyeSAuLi4NCj4gQ291bGQgYW55b25lIGhlbHAgbWUgPw0KPg0KPiAgICAgICBN
YXJlaw0KPg0KPg0KPiAtLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t
LS0tLS0tLS0tLS0tDQo+IFRoaXMgU0YubmV0IGVtYWlsIGlzIHNwb25zb3JlZCBieTogU3BsdW5r
IEluYy4gRG8geW91IGdyZXAgdGhyb3VnaCBsb2cgZmlsZXMNCj4gZm9yIHByb2JsZW1zPyAgU3Rv
cCEgIERvd25sb2FkIHRoZSBuZXcgQUpBWCBzZWFyY2ggZW5naW5lIHRoYXQgbWFrZXMNCj4gc2Vh
cmNoaW5nIHlvdXIgbG9nIGZpbGVzIGFzIGVhc3kgYXMgc3VyZmluZyB0aGUgIHdlYi4gIERPV05M
T0FEIFNQTFVOSyENCj4gaHR0cDovL3NlbC5hcy11cy5mYWxrYWcubmV0L3NlbD9jbWQ9ayZraWQQ
MzQzMiZiaWQjMDQ4NiZkYXQSMTY0Mg0KPiBfX19fX19fX19fX19fX19fX19fX19fX19fX19fX19f
X19fX19fX19fX19fX19fXw0KPiBEZXYtY3BwLXVzZXJzIG1haWxpbmcgbGlzdA0KPiBEZXYtY3Bw
LXVzZXJzQGxpc3RzLnNvdXJjZWZvcmdlLm5ldA0KPiBUTyBVTlNVQlNDUklCRTogaHR0cDovL3d3
dzIzLmJyaW5rc3Rlci5jb20vbm9pY3lzL2RldmNwcC8NCg0K

The sample line:
       #include <sub_dir>/<koolplot.h>
should be:
       #include <sub_dir/koolplot.h>

/pwm

On Wed, 22 Feb 2006, Guillermo Gutierrez wrote:

> hello,
> if you placed the include files in the dev-cpp include directory, you mig=
ht want to try replacing the "'s with <>'s.
>
> example:
>
> change
> =09#include "koolplot.h"
> to
> =09#include <koolplot.h>
>
> if you placed them in a subdirectory, then make it:
>
> =09#include <sub_dir>/<koolplot.h>
>
> hope this helps some.
>
> Guillermo
>
> -----Original Message-----
> From: dev...@li... [mailto:dev-cpp-users-adm=
in...@li...]On Behalf Of Marek Mal=FD
> Sent: Saturday, February 18, 2006 6:25 PM
> To: dev...@li...
> Subject: [Dev-C++] Does anybody uses KOOLPLOT together with DEV-C++ ?
>
>
> Does anybody uses KOOLPLOT together with Dev-C++ ?
>
> Hi,
>
> I'am using  Dev-C++  v. 4.9.9.2.
>
> Since I've downloaded actual WinBGIm files from here
>
> http://www14.brinkster.com/aditsu/console
>
> I have no problems with WinBGIm graphics used together with  current
> Dev-C++ version.
>
> I have just found out that exist C/C++ plotting library named Kooplot
> which uses WinBGIm graphics - see this page:
>
> http://www.codecutter.net/tools/koolplot/index.html
>
> I have copied files  koolplot.h, Plotdata.h, and  Plotstream.h to
> Dev-C++ include directory and
> libkoolplot.a to Dev-C++ lib directory as it is written in the above
> mentioned page, but
> I'm not able to compile this easy example - some compiler or linker error=
s
> appears...
>
> #include "koolplot.h"
> int main()
> {
>   Plotdata x(-360, 360), y =3D sin(x) + 3*x;
>   plot(x, y);
>    return 0;
> }
>
> Maybe some settings of Dev-C++ are necessary ...
> Could anyone help me ?
>
>       Marek
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log fi=
les
> for problems?  Stop!  Download the new AJAX search engine that makes
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=103432&bid#0486&dat=121642
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/

hello,
if you placed the include files in the dev-cpp include directory, you =
might want to try replacing the "'s with <>'s.

example:

change=20
	#include "koolplot.h"
to=20
	#include <koolplot.h>

if you placed them in a subdirectory, then make it:

	#include <sub_dir>/<koolplot.h>

hope this helps some.

Guillermo

-----Original Message-----
From: dev...@li... =
[mailto:dev...@li...]On Behalf Of Marek =
Mal=FD
Sent: Saturday, February 18, 2006 6:25 PM
To: dev...@li...
Subject: [Dev-C++] Does anybody uses KOOLPLOT together with DEV-C++ ?


Does anybody uses KOOLPLOT together with Dev-C++ ?

Hi,

I'am using  Dev-C++  v. 4.9.9.2.

Since I've downloaded actual WinBGIm files from here

http://www14.brinkster.com/aditsu/console

I have no problems with WinBGIm graphics used together with  current=20
Dev-C++ version.

I have just found out that exist C/C++ plotting library named Kooplot
which uses WinBGIm graphics - see this page:

http://www.codecutter.net/tools/koolplot/index.html

I have copied files  koolplot.h, Plotdata.h, and  Plotstream.h to=20
Dev-C++ include directory and
libkoolplot.a to Dev-C++ lib directory as it is written in the above=20
mentioned page, but
I'm not able to compile this easy example - some compiler or linker =
errors=20
appears...

#include "koolplot.h"
int main()
{
  Plotdata x(-360, 360), y =3D sin(x) + 3*x;
  plot(x, y);
   return 0;
}

Maybe some settings of Dev-C++ are necessary ...
Could anyone help me ?

      Marek


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log =
files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=103432&bid#0486&dat=121642
_______________________________________________
Dev-cpp-users mailing list
Dev...@li...
TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

 
 

----------------------------------------------------------------------

"Big match at my house!"

"I bring my guys you have yours!"

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Hello everybody,

  I'm using Dev-C++ (v. 4.9.9.2).
  This version of Dev-C++ works with WinBGIm (v.3.52) very
  well.

  http://www14.brinkster.com/aditsu/console

  but now is available WinBGIm (v.6.0) see

  http://www.codecutter.net/tools/winbgim

  and this actual wersion of WinBGIm doesn't
  work with  Dev-C++ (v. 4.9.9.2) very well.
  Some errors were occured when I tried to compile
  sources which I had compiled with WinBGIm (v.3.52) before without
  any problems.

  In other hand WinBGIm (v.6.0) works very well with environment Quincy
  2005

  http://www.codecutter.net/tools/quincy/index.html

  but I prefer Dev-C++ because it is much user-friendly than Quincy.

  So have anyone any idea how make WinBGIm (v.6.0) compatible with
  Dev-C++ (v. 4.9.9.2) ?

  If yes I will be appreciative for advice.

           Marek