dev-cpp-users Mailing List for Dev-C++

Hello Oroszi and all Dev-C++ users,

Sunday, November 24, 2002, 8:52:39 PM, Oroszi wrote as follows:

OB> gcc -c -o temp1.o temp1.c
OB> gcc -c -o temp2.o temp2.c
OB> gcc -c -o temp3.o temp3.c

Try these:
gcc -c *.cpp -s

OB> Some resources (if you have):

OB> windres -i tempres.rc -o tempres.o

Of course resources have to be compiled separately...

OB> Then link together:

OB> gcc temp1.o temp2.o temp3.o tempres.o -o temp.exe -mwindows

gcc *.o temp.exe -mwindows

-- 
regards, Zodiaq

Hello Everyone!

Sunday, November 24, 2002, 5:35:47 PM, Ioannis wrote:
IV> If anything else fails you can place c:\dev-c++\bin in your path and use
IV> g++ from the command line in the style:
IV> g++ temp.cpp -o temp
IV> or for C:
IV> gcc temp.c -o temp

That  is all true, but for a project with more than one file, it won't
work. You have to compile the source files individually to object (.o)
files, then you need to link them together. Something like this:
(The -c flag tells gcc not to link, but just to compile)

gcc -c -o temp1.o temp1.c
gcc -c -o temp2.o temp2.c
gcc -c -o temp3.o temp3.c

Some resources (if you have):

windres -i tempres.rc -o tempres.o

Then link together:

gcc temp1.o temp2.o temp3.o tempres.o -o temp.exe -mwindows

If  you  use common controls (if you call InitCommonControls() in your
program, then you do) use the -lcomctl32 flag too at the linking.

-- 
Best regards,
 Oroszi Balázs                     mailto:or...@vp...

PGP-FP: FB80 8A43 2664 6126 E465  46E2 2546 CFA3 C25B 9F70
finger -l or...@se...

Ok;

Thank u all for the response.

About updating: I was a bit reluctand to do so. I mean. How safe is it two
dyas before the deadline??

Does the updates include any major change on the compiler?

Anyhow. As I said on my last mail. It's struggling; but it's working. So
unless I have another crisis. I think I'll leave it as it is.

Thanks a lot again.
Santi

Yes, my mistake. I wanted to write:
 
or for C:
 
gcc temp.c -o temp
 
 
The g++ thing for C is an error.
 
 
Ioannis Vranos
 
* Programming pages: http://www.noicys.freeurl.com
<http://www.noicys.freeurl.com/> 
* Alternative URL: http://run.to/noicys

-----Original Message-----
From: Marcos Passini [mailto:pa...@ac...] 
Sent: Sunday, November 24, 2002 8:24 PM
To: Ioannis Vranos
Subject: RES: [Dev-C++] In desperate need of help


For C you'd better use *gcc* temp.c -o temp instead of *g++*

-----Mensagem original-----
De: dev...@li...
[mailto:dev...@li...]Em nome de Ioannis
Vranos
Enviada em: domingo, 24 de novembro de 2002 14:36
Para: Dev-C++ Mailing List
Assunto: RE: [Dev-C++] In desperate need of help


If anything else fails you can place c:\dev-c++\bin in your path and use
g++ from the command line in the style:
 
g++ temp.cpp -o temp
 
or for C:
 
g++ temp.c -o temp
 
 
 

Ioannis Vranos
 
* Programming pages: http://www.noicys.freeurl.com
<http://www.noicys.freeurl.com/> 
* Alternative URL: http://run.to/noicys

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of santi
Sent: Sunday, November 24, 2002 2:04 AM
To: dev...@li...
Subject: [Dev-C++] In desperate need of help


Hi,
 
Brand new member of this group.
 
I'm working with Dev c++ (4.9.6.0) under win XP.
(If its of any use. I'm also using Flex and Bison)
 
Anyway; I was doing grate; untill about half an hour ago. Dev c++
started hanging up. And now it won't start.
 
Actually. It does start. But It shuts down when I try to open my
project.
 
I'm 10 mins away from going nuts here. I have a deadline on tuesday.
 
As I said. I'm in desperate need of help, ideas (and above all
solutions)
 
Thx 
Santi
 
****************
 
Now, Only to give U the hole story. It all started a couple of days ago;
when It started crashing (not everytime, but eventually)
when I tryed to access a pointer (p-> )
 
It continued today.
 
On my win Xp; it just shuts down without further notice. 
But on the other machine we are working ( a win 98SE) it crahses the
system.
 
 
 
--------------
 
I have tryed; opening old versions of the project. But the results are
the same.
 
 
 

If anything else fails you can place c:\dev-c++\bin in your path and use
g++ from the command line in the style:
 
g++ temp.cpp -o temp
 
or for C:
 
g++ temp.c -o temp
 
 
 
Ioannis Vranos
 
* Programming pages: http://www.noicys.freeurl.com
<http://www.noicys.freeurl.com/> 
* Alternative URL: http://run.to/noicys

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of santi
Sent: Sunday, November 24, 2002 2:04 AM
To: dev...@li...
Subject: [Dev-C++] In desperate need of help


Hi,
 
Brand new member of this group.
 
I'm working with Dev c++ (4.9.6.0) under win XP.
(If its of any use. I'm also using Flex and Bison)
 
Anyway; I was doing grate; untill about half an hour ago. Dev c++
started hanging up. And now it won't start.
 
Actually. It does start. But It shuts down when I try to open my
project.
 
I'm 10 mins away from going nuts here. I have a deadline on tuesday.
 
As I said. I'm in desperate need of help, ideas (and above all
solutions)
 
Thx 
Santi
 
****************
 
Now, Only to give U the hole story. It all started a couple of days ago;
when It started crashing (not everytime, but eventually)
when I tryed to access a pointer (p-> )
 
It continued today.
 
On my win Xp; it just shuts down without further notice. 
But on the other machine we are working ( a win 98SE) it crahses the
system.
 
 
 
--------------
 
I have tryed; opening old versions of the project. But the results are
the same.
 
 
 

I agree it's about code completion, I had a couple of shut downs (I was
lucky, only twice), and once of them it achieved to launch vRoach which
shows info about what was the state when the error occurred, and there
was an error and the code completion in action, it just closed when I
tryed to type the - of ->.
The best I can say is try updating with vUpdate, you must have it in the
bin directory of dev, it's not a big download, about 2MB, less than five
minutes with my 56kb modem. For that you have to close Dev, since it
changes the name of dev.exe to dev.exe.BACKUP and saves the new version
as dev.exe. Now we are at 4.9.6.9 and I didn't found that bug again
since 4.6.9.1.

santi escribi=F3:

> Hi, Brand new member of this group. I'm working with Dev c++ (4.9.6.0)
> under win XP.(If its of any use. I'm also using Flex and
> Bison) Anyway; I was doing grate; untill about half an hour ago. Dev
> c++ started hanging up. And now it won't start. Actually. It does
> start. But It shuts down when I try to open my project. I'm 10 mins
> away from going nuts here. I have a deadline on tuesday. As I said.
> I'm in desperate need of help, ideas (and above all
> solutions) ThxSanti **************** Now, Only to give U the hole
> story. It all started a couple of days ago; when It started crashing
> (not everytime, but eventually)when I tryed to access a pointer (p->
> ) It continued today. On my win Xp; it just shuts down without further
> notice.But on the other machine we are working ( a win 98SE) it
> crahses the system.   -------------- I have tryed; opening old
> versions of the project. But the results are the same.

Hi everyone,

I would like to use a dll library that I built with the borland C++ =
builder.
But I have 2 problems:
    I can't debug with dev-cpp
    The soft crashes in the library code, and I cannot find why, since I =
cannot bebug....

Does anyone have a solution ???


            Erwan

Hi;

Me again, a little more calm now :-)

I don't really know what happend; but I managed to "trick dev c++ into =
work".

Now; before I open my dev project. I open another file (not a project =
file but a .c from the project)
and then proceed to open de project file.

I am still getting unexpected errors and shut downs from dev; but at =
least It its leting me work.

Anyway. If anybody outhere could give me a more scientific solution to =
my problem I'd apreciate it.

Thanks
Santiago


  ----- Original Message -----=20
  From: santi=20
  To:    =20
  Sent: Saturday, November 23, 2002 9:03 PM
  Subject: In desperate need of help


  Hi,

  Brand new member of this group.

  I'm working with Dev c++ (4.9.6.0) under win XP.
  (If its of any use. I'm also using Flex and Bison)

  Anyway; I was doing grate; untill about half an hour ago. Dev c++ =
started hanging up. And now it won't start.

  Actually. It does start. But It shuts down when I try to open my =
project.

  I'm 10 mins away from going nuts here. I have a deadline on tuesday.

  As I said. I'm in desperate need of help, ideas (and above all =
solutions)

  Thx=20
  Santi

  ****************

  Now, Only to give U the hole story. It all started a couple of days =
ago; when It started crashing (not everytime, but eventually)
  when I tryed to access a pointer (p-> )

  It continued today.

  On my win Xp; it just shuts down without further notice.=20
  But on the other machine we are working ( a win 98SE) it crahses the =
system.



  --------------

  I have tryed; opening old versions of the project. But the results are =
the same.

Hello santi and all Dev-C++ users,

Sunday, November 24, 2002, 1:03:55 AM, santi wrote as follows:


s> On my win Xp; it just shuts down without further notice. 
s> But on the other machine we are working ( a win 98SE) it crahses the system.

Looks like class browser is going nuts... try to disabling it in
options... also if this does not help delete devC++ ini, and if you
have some problems opening you project make it again - not everything
form the scratch, but make new one and copy old .cpp and .h files, and .rc
if you have it... then add these files to your new project...

Hope these helps...
-- 
regards, Zodiaq

Hi,

Brand new member of this group.

I'm working with Dev c++ (4.9.6.0) under win XP.
(If its of any use. I'm also using Flex and Bison)

Anyway; I was doing grate; untill about half an hour ago. Dev c++ =
started hanging up. And now it won't start.

Actually. It does start. But It shuts down when I try to open my =
project.

I'm 10 mins away from going nuts here. I have a deadline on tuesday.

As I said. I'm in desperate need of help, ideas (and above all =
solutions)

Thx=20
Santi

****************

Now, Only to give U the hole story. It all started a couple of days ago; =
when It started crashing (not everytime, but eventually)
when I tryed to access a pointer (p-> )

It continued today.

On my win Xp; it just shuts down without further notice.=20
But on the other machine we are working ( a win 98SE) it crahses the =
system.



--------------

I have tryed; opening old versions of the project. But the results are =
the same.