dev-cpp-users Mailing List for Dev-C++

Hello William,

There  are two points to be made but, please consider my two forms:

// stdmain.cpp
/* this will complie but  To disable this warning use -Wno-deprecated
     otherwise ok for Learning pactice.
 */
#include<iostream.h>
#include<stdlib.h>  //system()
  void main()
  {
      cout<<"Hello Dolly\n";             system("pause") ;
      return;                               // Main is not expecting
  //anything but  still have to return control to OS !
  }


 // stdmain.cpp

#include<iostream>
#include<cstdlib.h>  // All standard C libraries  are presented with 'c'
                                //inserted for compatabillities !!
using namespace std; // to qualified  ( standard C++ libraries files only).
  int main()
  {
      cout<<"Hello Dolly\n";      
       system("pause") ;
      return 0;          // Main is not expecting
                        //anything but   return value of 0  to OS !
  }


A good C&C++ complier is ISO standard. cut & paste it and try.
I hope this  have help you. I heard that < cprogramming.com  >is a good
resource website.  

Regards
  Rudolph


----- Original Message -----
From: "William W Cridland" <wa...@ju...>
To: <dev...@li...>
Sent: Monday, December 29, 2003 9:16 PM
Subject: [Dev-C++] re+ Public Domain C++ IDE

Hello William,

There  are two points to be made but, please consider my two forms:

// stdmain.cpp
/* this will complie but  To disable this warning use -Wno-deprecated
     otherwise ok for Learning pactice.
 */
#include<iostream.h>
#include<stdlib.h>  //system()
  void main()
  {
      cout<<"Hello Dolly\n";             system("pause") ;
      return;                               // Main is not expecting
  //anything but  still have to return control to OS !
  }


 // stdmain.cpp

#include<iostream>
#include<cstdlib.h>  // All standard C libraries  are presented with 'c'
                                //inserted for compatabillities !!
using namespace std; // to qualified  ( standard C++ libraries files only).
  int main()
  {
      cout<<"Hello Dolly\n";      
       system("pause") ;
      return 0;          // Main is not expecting
                        //anything but   return value of 0  to OS !
  }


A good C&C++ complier is ISO standard. cut & paste it and try.
I hope this  have help you. I heard that < cprogramming.com  >is a good
resource website.  

Regards
  Rudolph


----- Original Message -----
From: "William W Cridland" <wa...@ju...>
To: <dev...@li...>
Sent: Monday, December 29, 2003 9:16 PM
Subject: [Dev-C++] re+ Public Domain C++ IDE


> I have downloaded your C++ IDE 1991 and looks great . However after
> having taught C++ for the past 6 years . All the simple code I input to
> your IDE seems to fail with notes such as antiquated etc etc. Code is as
> follows you cannot get more  simple than this.
>
>
>                                                      #include<iostream.h>
>
>                          void main()
>
>                   {
>                                             cout<<"Hello Dolly\n";
>
>                                      // you dont need a return at this
> level of code, also
>                                     // Main is not expecting anything
> back  !
>                  }
>  Would apreciate any help advice or perhaps you could steer me to a
> tutorial which would elaborat or give examples that work with your
> compiler !!. Regards
> Bill Cridland WA1HMW Bolton MA
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________

Hi all ::

Trivial defence ... I recall several months !!  Dealing with this on the =
Microsoft compiler at transition time circa. 1997 and '98.

I much prefer the "\backward" folder stuff that gcc(?) or is it a DEV =
CPP factor -- Use.

I had several project managers dumping on me for "risking' everything -- =
Mind you we delivered on time, etc, etc.  (Because we allowed for the =
'pain').

Enjoy someone's forward thinking of the compiler set-up.  It will save =
you money !

Good show folks.

Happy 2004 .... Will.
  ----- Original Message -----=20
  From: P.D. van Zelst=20
  To: 'William W Cridland' ; dev...@li...=20
  Sent: Tuesday, December 30, 2003 6:22 AM
  Subject: RE: [Dev-C++] re+ Public Domain C++ IDE


  The C++ you're using is pre-standard C++. In 1998 a C++ standard was
  finalized and became official, which altered a few things you might be =
used
  to. For instance, namespaces have been added, and are now enforced by =
most
  compilers. The standard C++ library functions, types and objects are =
now
  stored inside a namespace called "std". "void main" has never been =
standard
  C or C++, and thus has always been wrong. The newer versions of GCC =
simply
  don't accept it anymore. Furthermore, the standard C++ library header =
files
  are now extensionless, to avoid confusion with standard C library =
header
  files.
  So, applying all these changes, here is what your code should look =
like now:

  #include <iostream>
  using namespace std;

  int main()
  {
      cout << "Hello Dolly\n";
      return 0;
  }

  Hope this helped.

  Regards,


  Paul

  -----Original Message-----
  From: dev...@li...
  [mailto:dev...@li...] On Behalf Of =
William W
  Cridland
  Sent: Monday, December 29, 2003 10:16 PM
  To: dev...@li...
  Subject: [Dev-C++] re+ Public Domain C++ IDE

  I have downloaded your C++ IDE 1991 and looks great . However after
  having taught C++ for the past 6 years . All the simple code I input =
to
  your IDE seems to fail with notes such as antiquated etc etc. Code is =
as
  follows you cannot get more  simple than this.
                                  =20

                                                       =
#include<iostream.h>

                           void main()

                    {
                                              cout<<"Hello Dolly\n";
                                          =20
                                       // you dont need a return at this
  level of code, also
                                      // Main is not expecting anything
  back  !
                   }
   Would apreciate any help advice or perhaps you could steer me to a
  tutorial which would elaborat or give examples that work with your
  compiler !!. Regards
  Bill Cridland WA1HMW Bolton MA



  -------------------------------------------------------
  This SF.net email is sponsored by: IBM Linux Tutorials.
  Become an expert in LINUX or just sharpen your skills.  Sign up for =
IBM's
  Free Linux Tutorials.  Learn everything from the bash shell to sys =
admin.
  Click now! =
http://ads.osdn.com/?ad_id=3D1278&alloc_id=3D3371&op=3Dclick
  _______________________________________________
  Dev-cpp-users mailing list
  Dev...@li...
  TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
  https://lists.sourceforge.net/lists/listinfo/dev-cpp-users




  -------------------------------------------------------
  This SF.net email is sponsored by: IBM Linux Tutorials.
  Become an expert in LINUX or just sharpen your skills.  Sign up for =
IBM's
  Free Linux Tutorials.  Learn everything from the bash shell to sys =
admin.
  Click now! =
http://ads.osdn.com/?ad_id=3D1278&alloc_id=3D3371&op=3Dclick
  _______________________________________________
  Dev-cpp-users mailing list
  Dev...@li...
  TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
  https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

Can you give us some examples of these error messages? What happens if you 
do an even more simple piece of code (without the iostream library) such as

int main(int argc, char** argv)
{
    int SmlNumber = 5;
    int BigNumber = 50;
    int TempNumber;

    TempNumber = SmlNumber + BigNumber;

    return TempNumber;
}

Also I do hope you are not teaching students to use depreciated styles of 
coding (the .h extention for example).


>From: William W Cridland <wa...@ju...>
>To: dev...@li...
>Subject: [Dev-C++] re+ Public Domain C++ IDE
>Date: Mon, 29 Dec 2003 13:16:08 -0800
>
>I have downloaded your C++ IDE 1991 and looks great . However after
>having taught C++ for the past 6 years . All the simple code I input to
>your IDE seems to fail with notes such as antiquated etc etc. Code is as
>follows you cannot get more  simple than this.
>
>
>                                                      #include<iostream.h>
>
>                          void main()
>
>                   {
>                                             cout<<"Hello Dolly\n";
>
>                                      // you dont need a return at this
>level of code, also
>                                     // Main is not expecting anything
>back  !
>                  }
>  Would apreciate any help advice or perhaps you could steer me to a
>tutorial which would elaborat or give examples that work with your
>compiler !!. Regards
>Bill Cridland WA1HMW Bolton MA
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: IBM Linux Tutorials.
>Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
>Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
>Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
>_______________________________________________
>Dev-cpp-users mailing list
>Dev...@li...
>TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

_________________________________________________________________
Sign-up for a FREE BT Broadband connection today! 
http://www.msn.co.uk/specials/btbroadband

Hi Michal,

you wrote:

> the devpak repository project is opened
> at http://molhanec.net/devpaks/.

Great work. But I think there should be some limitation in creating new 
categories. First they should be general, like 3d Graphics, 
Multimediaplatfrom or Framesets. Second not everyone should be allowed 
to create new categories, maybe only a 'moderator' can create new, if 
there are in one category too much devpacks of the same kind. So far so 
_very_ good.

> It tries to be repository of links
> to devpaks, so go and add your devpaks
> there :-).

Maybe the project could be moved to a opensource platform like 
http://www.berlios.de/index.php.en or http://savannah.nongnu.org/. Then 
all the DevPacks could be hosted on these pages without any 
bandwidthproblems.

so long

Tim

The C++ you're using is pre-standard C++. In 1998 a C++ standard was
finalized and became official, which altered a few things you might be used
to. For instance, namespaces have been added, and are now enforced by most
compilers. The standard C++ library functions, types and objects are now
stored inside a namespace called "std". "void main" has never been standard
C or C++, and thus has always been wrong. The newer versions of GCC simply
don't accept it anymore. Furthermore, the standard C++ library header files
are now extensionless, to avoid confusion with standard C library header
files.
So, applying all these changes, here is what your code should look like now:

#include <iostream>
using namespace std;

int main()
{
    cout << "Hello Dolly\n";
    return 0;
}

Hope this helped.

Regards,


Paul

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of William W
Cridland
Sent: Monday, December 29, 2003 10:16 PM
To: dev...@li...
Subject: [Dev-C++] re+ Public Domain C++ IDE

I have downloaded your C++ IDE 1991 and looks great . However after
having taught C++ for the past 6 years . All the simple code I input to
your IDE seems to fail with notes such as antiquated etc etc. Code is as
follows you cannot get more  simple than this.
                                 

                                                     #include<iostream.h>

                         void main()

                  {
                                            cout<<"Hello Dolly\n";
                                         
                                     // you dont need a return at this
level of code, also
                                    // Main is not expecting anything
back  !
                 }
 Would apreciate any help advice or perhaps you could steer me to a
tutorial which would elaborat or give examples that work with your
compiler !!. Regards
Bill Cridland WA1HMW Bolton MA



-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
Dev-cpp-users mailing list
Dev...@li...
TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

It's a common problem: the C++ standard is changed and so your program, as
most of those learned by students, is incorrect. The actual C++ standard
library, as described in Stroustrup 3rd edition, has the following
form for an hello-world program:

#include <iostream>

int main() {
	std::cout << "Hello world!" << std::endl;
}

The old library is still present, but in a backward compatibility
directory that is not guaranteed to be supported in future.

Bye, Ferdinando

I have downloaded your C++ IDE 1991 and looks great . However after
having taught C++ for the past 6 years . All the simple code I input to
your IDE seems to fail with notes such as antiquated etc etc. Code is as
follows you cannot get more  simple than this.
                                 

                                                     #include<iostream.h>

                         void main()

                  {
                                            cout<<"Hello Dolly\n";
                                         
                                     // you dont need a return at this
level of code, also
                                    // Main is not expecting anything
back  !
                 }
 Would apreciate any help advice or perhaps you could steer me to a
tutorial which would elaborat or give examples that work with your
compiler !!. Regards
Bill Cridland WA1HMW Bolton MA

    Hello all,
the devpak repository project is opened
at http://molhanec.net/devpaks/ .
It tries to be repository of links
to devpaks, so go and add your devpaks
there :-).

Michal

hello.
I've been using McAfee with vShield activated on my W98se, on my old pentium 
II - 350Mh, 64MB RAM, and no problem at all when compiling. (Although, for 
better performace, I had unselected to scan "outbound files" in system 
scaning properties).
bye.


>From: "Tom Craig" <jat...@gm...>
>To: <dev...@li...>
>Subject: Re: [Dev-C++] MAJOR bug
>Date: Sat, 27 Dec 2003 18:08:42 -0000
>
>Are you running an anti-virus program? I had to disable Norton when
>compiling or the entire system would crash. I've since changed to McAfee 
>and
>have to disable that too, or my floppy drive is repeatedly scanned for a
>disk. I too am using WinME.
>

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*. 
http://join.msn.com/?page=features/featuredemail

P.T. Waugh MA wrote:

> What should I be modifying to allow me to save output files to a 
> sub-directory, but without mandating the extension so that the 
> compiler will use the appropriate .s or .o as required.

Try using -save-temps then.


Daniel K. O.

Found this stuff on the GNU site, actually had it all along.

Patrick

At 20:35 28-12-03, P.T. Waugh MA wrote:
>Not really, I have GSView as well.  Does nothing more than what Distiller 
>will do.  What I require is documentation in a different format than .ps 
>or .pdf, ie. text.
>
>Patrick
>
>
>At 18:40 28-12-03, Nathan Smith wrote:
>>Ghostviw or something should be useful. I have no idea what platforms
>>but I'm guessing most.
>>----- Original Message -----
>>From: "P.T. Waugh MA" <pt...@ea...>
>>To: <dev...@li...>
>>Sent: Monday, December 29, 2003 12:26 PM
>>Subject: [Dev-C++] gcc docs in other than ps
>>
>>
>> > Hi,
>> >
>> > I downloaded the gcc docs, but they are in PS formated on A4.
>> >
>> > I used Acrobat's Distiller to convert them to .pdf, but the text is
>>barely
>> > readable, and since it is in A4 format, I cannot easily print it.
>> >
>> > I'm looking for the docs in some other format so that I might be
>>able to
>> > better manipulate them into the form I need to be able to read it.
>> >
>> > Where might I find some other format?  I have a FreeBSD machine at
>>my
>> > disposal as well.
>> >
>> > Thanks, Patrick
>> >
>> >
>> >
>> > -------------------------------------------------------
>> > This SF.net email is sponsored by: IBM Linux Tutorials.
>> > Become an expert in LINUX or just sharpen your skills.  Sign up for
>>IBM's
>> > Free Linux Tutorials.  Learn everything from the bash shell to sys
>>admin.
>> > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
>> > _______________________________________________
>> > Dev-cpp-users mailing list
>> > Dev...@li...
>> > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
>> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>>
>>
>>
>>
>>-------------------------------------------------------
>>This SF.net email is sponsored by: IBM Linux Tutorials.
>>Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
>>Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
>>Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
>>_______________________________________________
>>Dev-cpp-users mailing list
>>Dev...@li...
>>TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
>>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: IBM Linux Tutorials.
>Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
>Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
>Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
>_______________________________________________
>Dev-cpp-users mailing list
>Dev...@li...
>TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
>https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

Forget these errors.  I determined the problem I was having there were do 
to specifying
-std=gnu99.  Still when using the -S compiler option it mandates that the 
file have the .o extension which is a pain.  I'd rather have a .s file 
created so it is persistent, and now think the only way to do this is to 
manually setup a dependency and rule.

Patrick

At 04:58 29-12-03, P.T. Waugh MA wrote:
>Using this hand modified makefile:
>
>CPP  = g++.exe
>CC   = mingw32-gcc.exe
>WINDRES = windres.exe
>RES  = X01_private.res
>OBJ  = object/main.o $(RES)
>LINKOBJ  = source/main.o $(RES)
>LIBS =  -L"C:/bin/cpp/lib" -mwindows
>INCS =  -I"C:/bin/cpp/include"
>CXXINCS =  -I"C:/bin/cpp/include/c++"  -I"C:/bin/cpp/include/c++/mingw32" 
>-I"C:/bin/cpp/include/c++/backward"  -I"C:/bin/cpp/include"
>BIN  = exe/X01.exe
>CXXFLAGS = $(CXXINCS) -std=gnu99
>CFLAGS = $(INCS) -std=gnu99
>
>.PHONY: all all-before all-after clean clean-custom
>
>all: all-before exe/X01.exe all-after
>
>
>clean: clean-custom
>         rm -f $(OBJ) $(BIN)
>
>$(BIN): $(LINKOBJ)
>         $(CPP) $(LINKOBJ) -o "exe\X01.exe" $(LIBS)
>
>object/main.s: source/main.cpp
>         $(CPP) -c source/main.cpp -S $(CXXFLAGS)
>
>X01_private.res: X01_private.rc
>         $(WINDRES) -i X01_private.rc -I rc -o X01_private.res -O coff
>
>on the simple attached (automatically generated app) main.cpp where I 
>completely removed the main.o lines and inserted a rule to make the asm 
>source yields this console output:
>
>C:\Documents and Settings\patrick\My Documents\Shop>make
>g++ -I"C:/bin/cpp/include/c++"  -I"C:/bin/cpp/includ
>=gnu99   -c -o source/main.o source/main.cpp
>In file included from c:/bin/MinGW/include/objbase.h
>                  from c:/bin/MinGW/include/ole2.h:9,
>                  from c:/bin/MinGW/include/windows.h
>                  from source/main.cpp:1:
>c:/bin/MinGW/include/rpcndr.h:123: non-local functio
>    NDRSContextMarshall(<anonymous struct>*, void*, v
>    anonymous type
>c:/bin/MinGW/include/rpcndr.h:124: non-local functio
>    NDRSContextUnmarshall(void*, long unsigned int)'
>c:/bin/MinGW/include/rpcndr.h:315: non-local functio
>    NdrServerContextMarshall(_MIDL_STUB_MESSAGE*, <an
>    (*)(void*))' uses anonymous type
>c:/bin/MinGW/include/rpcndr.h:336: non-local functio
>    NdrServerContextUnmarshall(_MIDL_STUB_MESSAGE*)'
>make: *** [source/main.o] Error 1
>
>C:\Documents and Settings\patrick\My Documents\Shop>
>
>*********************** output end
>
>This error seems strange to me as I'm not asking for any .o file, and in 
>fact deleted the main.o rule to see if I could get rid of this error, 
>which was stopping me inside the GUI as well.
>
>Again, my goal is simple.  I'd like to just be able to turn on the -S 
>option and then get .s files as output, rather than asm in .o files.
>
>Right now, I'm doing this merely to groke the GUI and see the relationship 
>to the Makefile.win it creates, etc.
>
>Anyway, if anyone can set me straight about this I'm grateful.  It just 
>does not appear to be working the way I would expect.  I notice that in 
>the Makefile.win created by Dev-Cpp, that it does not use a macro for the 
>.o rule.
>
>I assume what I want to do is possible with a standard makefile, and 
>therefore should be possible with the Dev-Cpp GUI.  Maybe I need to 
>manually enter an additional rule?
>
>Patrick
>
>
>
>
>

It is not the compiler. It is the linker in combination with
the design of the c++ library.

If you strip the binary, it will be a bit smaller, but you will still get
a bit of extra from the RTL.

/Per W

On Mon, 29 Dec 2003, Kevin Sopp wrote:

> Hi,
> using a simple Hello World program and the appropriate compiler flags
> (-O3) and without any debug info the executable is about 440KB in size.
> The compiler doesn't seem to be doing any dead code removal. I remember I
> had this problem a long time ago when I used cygwin but I don't remember
> my solution.
>
> --
> Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

Hi Kevin,

you could try strip, for example 'strip -s filename.exe'. If you think 
your executeable is still too big, you could give upx (upx.sf.net) a try.


so long

Tim

Kevin Sopp wrote:
> using a simple Hello World program and the appropriate compiler flags 
> (-O3) and without any debug info the executable is about 440KB in size. 
> The compiler doesn't seem to be doing any dead code removal. I remember 
> I had this problem a long time ago when I used cygwin but I don't 
> remember my solution.

This is not a problem, and there is no real "solution" to it.

One alternate "solution" might be to use simple C code for a Hello World 
program. That will get you a 20 KB exe :)

However, if you wish to reduce the size of your exe, use UPX.
http://upx.sf.net

The size growth for C++ is because stdc++ is linked statically into the 
exe, however when using simple C code, the exe is linked dynamically to 
Windows DLLs (like msvcrt.dll, etc.)

--
Greetings,
   Balázs

Hi!

If you use SH (SuperH) family, You should try to use

KPIT GNU SH ToolChain and KPIT free support

http://www.kpitgnutools.com

There are GCC 3.3.1 for SH, H8/300, H8S and quite
good, fast and FREE support.

You can download this tools for free.
It consists some examples.

Greetings,
Collins




----- Original Message ----- 
From: "Smitha V. Babu" <smi...@so...>
To: "Per Westermark" <pw...@ia...>; "Smitha V. Babu"
<smi...@so...>
Cc: <dev...@li...>
Sent: Monday, December 29, 2003 1:39 PM
Subject: RE: [Dev-C++] write a startup code


> i don't know how to setup the processor register or what value i have to
> give for it..
> we are using the hitachi chip..
> is there any good tutorial with which i can start...
> Expecting help...
> regds
> smitha
>
> > -----Original Message-----
> > From: Per Westermark [SMTP:pw...@ia...]
> > Sent: Monday, December 29, 2003 5:50 PM
> > To: Smitha V. Babu
> > Cc: dev...@li...
> > Subject: RE: [Dev-C++] write a startup code
> >
> > There is nothing magic about it.
> >
> > All you have to do is setup the processor registers. Then you may call
the
> > _main function and perform the rest of the hardware initialization
there.
> >
> > What type of processor are you using? If it is a 386 or higher you might
> > have to initialize processor to proper memory mappings and then enter
> > protected mode before calling _main.
> >
> > /Per W
> >
> > On Mon, 29 Dec 2003, Smitha V. Babu wrote:
> >
> > > hi ..
> > > thank you for your instant reply..
> > > I am writing startup code for my gcc compiled program for SH on custom
> > made
> > > board. The code that is been generated is fine. But now, I want to add
> > my
> > > own startup code.
> > > What i have to do..does I need to write a small piece of
"free-standing"
> > > code, i.e. it will contain its own startup code .
> > > can u give some guidelines..
> > > how i have to start
> > > regards
> > > smitha
> > >
> > > > -----Original Message-----
> > > > From: Per Westermark [SMTP:pw...@ia...]
> > > > Sent: Monday, December 29, 2003 5:21 PM
> > > > To: Smitha V. Babu
> > > > Cc: dev...@li...
> > > > Subject: Re: [Dev-C++] write a startup code
> > > >
> > > > You have to come back with more information. Are you building some
> > > > embedded system or? That is the only reason to write own startup
code.
> > > >
> > > > /Per W
> > > >
> > > > On Mon, 29 Dec 2003, Smitha V. Babu wrote:
> > > >
> > > > > hi ,
> > > > > Does any body know how to write startup code..
> > > > > How i can tell the processor to go to main function execute a
> > particular
> > > > > function..register exit functions...
> > > > >
> > > > > regards
> > > > > smitha
> > > > >
> > *********************************************************************
> > > > > Disclaimer: The information in this e-mail and any attachments is
> > > > > confidential / privileged. It is intended solely for the addressee
> > or
> > > > > addressees. If you are not the addressee indicated in this
message,
> > you
> > > > may
> > > > > not copy or deliver this message to anyone. In such case, you
should
> > > > destroy
> > > > > this message and kindly notify the sender by reply email. Please
> > advise
> > > > > immediately if you or your employer does not consent to Internet
> > email
> > > > for
> > > > > messages of this kind.
> > > > >
> > *********************************************************************
> > > > >
> > > > >
> > > > > -------------------------------------------------------
> > > > > This SF.net email is sponsored by: IBM Linux Tutorials.
> > > > > Become an expert in LINUX or just sharpen your skills.  Sign up
for
> > > > IBM's
> > > > > Free Linux Tutorials.  Learn everything from the bash shell to sys
> > > > admin.
> > > > > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> > > > > _______________________________________________
> > > > > Dev-cpp-users mailing list
> > > > > Dev...@li...
> > > > > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> > > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > > >
> > > *********************************************************************
> > > Disclaimer: The information in this e-mail and any attachments is
> > > confidential / privileged. It is intended solely for the addressee or
> > > addressees. If you are not the addressee indicated in this message,
you
> > may
> > > not copy or deliver this message to anyone. In such case, you should
> > destroy
> > > this message and kindly notify the sender by reply email. Please
advise
> > > immediately if you or your employer does not consent to Internet email
> > for
> > > messages of this kind.
> > > *********************************************************************
> > >
> *********************************************************************
> Disclaimer: The information in this e-mail and any attachments is
> confidential / privileged. It is intended solely for the addressee or
> addressees. If you are not the addressee indicated in this message, you
may
> not copy or deliver this message to anyone. In such case, you should
destroy
> this message and kindly notify the sender by reply email. Please advise
> immediately if you or your employer does not consent to Internet email for
> messages of this kind.
> *********************************************************************
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

Hi,
using a simple Hello World program and the appropriate compiler flags 
(-O3) and without any debug info the executable is about 440KB in size. 
The compiler doesn't seem to be doing any dead code removal. I remember I 
had this problem a long time ago when I used cygwin but I don't remember 
my solution.

-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

Using this hand modified makefile:

CPP  = g++.exe
CC   = mingw32-gcc.exe
WINDRES = windres.exe
RES  = X01_private.res
OBJ  = object/main.o $(RES)
LINKOBJ  = source/main.o $(RES)
LIBS =  -L"C:/bin/cpp/lib" -mwindows
INCS =  -I"C:/bin/cpp/include"
CXXINCS 
=  -I"C:/bin/cpp/include/c++"  -I"C:/bin/cpp/include/c++/mingw32" 
-I"C:/bin/cpp/include/c++/backward"  -I"C:/bin/cpp/include"
BIN  = exe/X01.exe
CXXFLAGS = $(CXXINCS) -std=gnu99
CFLAGS = $(INCS) -std=gnu99

.PHONY: all all-before all-after clean clean-custom

all: all-before exe/X01.exe all-after


clean: clean-custom
	rm -f $(OBJ) $(BIN)

$(BIN): $(LINKOBJ)
	$(CPP) $(LINKOBJ) -o "exe\X01.exe" $(LIBS)

object/main.s: source/main.cpp
	$(CPP) -c source/main.cpp -S $(CXXFLAGS)

X01_private.res: X01_private.rc
	$(WINDRES) -i X01_private.rc -I rc -o X01_private.res -O coff

on the simple attached (automatically generated app) main.cpp where I 
completely removed the main.o lines and inserted a rule to make the asm 
source yields this console output:

C:\Documents and Settings\patrick\My Documents\Shop>make
g++ -I"C:/bin/cpp/include/c++"  -I"C:/bin/cpp/includ
=gnu99   -c -o source/main.o source/main.cpp
In file included from c:/bin/MinGW/include/objbase.h
                  from c:/bin/MinGW/include/ole2.h:9,
                  from c:/bin/MinGW/include/windows.h
                  from source/main.cpp:1:
c:/bin/MinGW/include/rpcndr.h:123: non-local functio
    NDRSContextMarshall(<anonymous struct>*, void*, v
    anonymous type
c:/bin/MinGW/include/rpcndr.h:124: non-local functio
    NDRSContextUnmarshall(void*, long unsigned int)'
c:/bin/MinGW/include/rpcndr.h:315: non-local functio
    NdrServerContextMarshall(_MIDL_STUB_MESSAGE*, <an
    (*)(void*))' uses anonymous type
c:/bin/MinGW/include/rpcndr.h:336: non-local functio
    NdrServerContextUnmarshall(_MIDL_STUB_MESSAGE*)'
make: *** [source/main.o] Error 1

C:\Documents and Settings\patrick\My Documents\Shop>

*********************** output end

This error seems strange to me as I'm not asking for any .o file, and in 
fact deleted the main.o rule to see if I could get rid of this error, which 
was stopping me inside the GUI as well.

Again, my goal is simple.  I'd like to just be able to turn on the -S 
option and then get .s files as output, rather than asm in .o files.

Right now, I'm doing this merely to groke the GUI and see the relationship 
to the Makefile.win it creates, etc.

Anyway, if anyone can set me straight about this I'm grateful.  It just 
does not appear to be working the way I would expect.  I notice that in the 
Makefile.win created by Dev-Cpp, that it does not use a macro for the .o rule.

I assume what I want to do is possible with a standard makefile, and 
therefore should be possible with the Dev-Cpp GUI.  Maybe I need to 
manually enter an additional rule?

Patrick

i don't know how to setup the processor register or what value i have to
give for it..
we are using the hitachi chip..
is there any good tutorial with which i can start...
Expecting help...
regds
smitha

> -----Original Message-----
> From:	Per Westermark [SMTP:pw...@ia...]
> Sent:	Monday, December 29, 2003 5:50 PM
> To:	Smitha V. Babu
> Cc:	dev...@li...
> Subject:	RE: [Dev-C++] write a startup code
> 
> There is nothing magic about it.
> 
> All you have to do is setup the processor registers. Then you may call the
> _main function and perform the rest of the hardware initialization there.
> 
> What type of processor are you using? If it is a 386 or higher you might
> have to initialize processor to proper memory mappings and then enter
> protected mode before calling _main.
> 
> /Per W
> 
> On Mon, 29 Dec 2003, Smitha V. Babu wrote:
> 
> > hi ..
> > thank you for your instant reply..
> > I am writing startup code for my gcc compiled program for SH on custom
> made
> > board. The code that is been generated is fine. But now, I want to add
> my
> > own startup code.
> > What i have to do..does I need to write a small piece of "free-standing"
> > code, i.e. it will contain its own startup code .
> > can u give some guidelines..
> > how i have to start
> > regards
> > smitha
> >
> > > -----Original Message-----
> > > From:	Per Westermark [SMTP:pw...@ia...]
> > > Sent:	Monday, December 29, 2003 5:21 PM
> > > To:	Smitha V. Babu
> > > Cc:	dev...@li...
> > > Subject:	Re: [Dev-C++] write a startup code
> > >
> > > You have to come back with more information. Are you building some
> > > embedded system or? That is the only reason to write own startup code.
> > >
> > > /Per W
> > >
> > > On Mon, 29 Dec 2003, Smitha V. Babu wrote:
> > >
> > > > hi ,
> > > > Does any body know how to write startup code..
> > > > How i can tell the processor to go to main function execute a
> particular
> > > > function..register exit functions...
> > > >
> > > > regards
> > > > smitha
> > > >
> *********************************************************************
> > > > Disclaimer: The information in this e-mail and any attachments is
> > > > confidential / privileged. It is intended solely for the addressee
> or
> > > > addressees. If you are not the addressee indicated in this message,
> you
> > > may
> > > > not copy or deliver this message to anyone. In such case, you should
> > > destroy
> > > > this message and kindly notify the sender by reply email. Please
> advise
> > > > immediately if you or your employer does not consent to Internet
> email
> > > for
> > > > messages of this kind.
> > > >
> *********************************************************************
> > > >
> > > >
> > > > -------------------------------------------------------
> > > > This SF.net email is sponsored by: IBM Linux Tutorials.
> > > > Become an expert in LINUX or just sharpen your skills.  Sign up for
> > > IBM's
> > > > Free Linux Tutorials.  Learn everything from the bash shell to sys
> > > admin.
> > > > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> > > > _______________________________________________
> > > > Dev-cpp-users mailing list
> > > > Dev...@li...
> > > > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> > > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > > >
> > *********************************************************************
> > Disclaimer: The information in this e-mail and any attachments is
> > confidential / privileged. It is intended solely for the addressee or
> > addressees. If you are not the addressee indicated in this message, you
> may
> > not copy or deliver this message to anyone. In such case, you should
> destroy
> > this message and kindly notify the sender by reply email. Please advise
> > immediately if you or your employer does not consent to Internet email
> for
> > messages of this kind.
> > *********************************************************************
> >
*********************************************************************
Disclaimer: The information in this e-mail and any attachments is
confidential / privileged. It is intended solely for the addressee or
addressees. If you are not the addressee indicated in this message, you may
not copy or deliver this message to anyone. In such case, you should destroy
this message and kindly notify the sender by reply email. Please advise
immediately if you or your employer does not consent to Internet email for
messages of this kind.
*********************************************************************

There is nothing magic about it.

All you have to do is setup the processor registers. Then you may call the
_main function and perform the rest of the hardware initialization there.

What type of processor are you using? If it is a 386 or higher you might
have to initialize processor to proper memory mappings and then enter
protected mode before calling _main.

/Per W

On Mon, 29 Dec 2003, Smitha V. Babu wrote:

> hi ..
> thank you for your instant reply..
> I am writing startup code for my gcc compiled program for SH on custom made
> board. The code that is been generated is fine. But now, I want to add my
> own startup code.
> What i have to do..does I need to write a small piece of "free-standing"
> code, i.e. it will contain its own startup code .
> can u give some guidelines..
> how i have to start
> regards
> smitha
>
> > -----Original Message-----
> > From:	Per Westermark [SMTP:pw...@ia...]
> > Sent:	Monday, December 29, 2003 5:21 PM
> > To:	Smitha V. Babu
> > Cc:	dev...@li...
> > Subject:	Re: [Dev-C++] write a startup code
> >
> > You have to come back with more information. Are you building some
> > embedded system or? That is the only reason to write own startup code.
> >
> > /Per W
> >
> > On Mon, 29 Dec 2003, Smitha V. Babu wrote:
> >
> > > hi ,
> > > Does any body know how to write startup code..
> > > How i can tell the processor to go to main function execute a particular
> > > function..register exit functions...
> > >
> > > regards
> > > smitha
> > > *********************************************************************
> > > Disclaimer: The information in this e-mail and any attachments is
> > > confidential / privileged. It is intended solely for the addressee or
> > > addressees. If you are not the addressee indicated in this message, you
> > may
> > > not copy or deliver this message to anyone. In such case, you should
> > destroy
> > > this message and kindly notify the sender by reply email. Please advise
> > > immediately if you or your employer does not consent to Internet email
> > for
> > > messages of this kind.
> > > *********************************************************************
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.net email is sponsored by: IBM Linux Tutorials.
> > > Become an expert in LINUX or just sharpen your skills.  Sign up for
> > IBM's
> > > Free Linux Tutorials.  Learn everything from the bash shell to sys
> > admin.
> > > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> > > _______________________________________________
> > > Dev-cpp-users mailing list
> > > Dev...@li...
> > > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> > > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> > >
> *********************************************************************
> Disclaimer: The information in this e-mail and any attachments is
> confidential / privileged. It is intended solely for the addressee or
> addressees. If you are not the addressee indicated in this message, you may
> not copy or deliver this message to anyone. In such case, you should destroy
> this message and kindly notify the sender by reply email. Please advise
> immediately if you or your employer does not consent to Internet email for
> messages of this kind.
> *********************************************************************
>

Yes, I can successfully change the object/output directory, no problem.

The problem is that there is apparently no way to just have MinGW just 
output the asm file as .s, rather than .o, so it looks like an object vs. 
and asm file (without forcing it with the -o command option).

That is to say that when I throw the switch (-S in this case) I really want 
to see it output a .s file automatically, rather than .o.  Apparently, 
however, the GUI does not permit this as it puts in a non-removable -o 
option regardless mandating output be .o.  I even tried disabling this by 
editing the compile command with override, and removing the -o part.  If I 
do this, then it simply fails altogether.

So, I guess it is just a limitation and that if I want this behavior, I'll 
have to create and manage my own make file.

Patrick

At 03:31 29-12-03, Piotr Olszewski Z.E.SiMS wrote:
>----- Original Message -----
>From: "P.T. Waugh MA" <pt...@ea...>
>To: "Dev - C++" <dev...@li...>
>Sent: Monday, December 29, 2003 6:36 AM
>Subject: [Dev-C++] -S solution to viewing .asm
>
>
> > Hi,
>
>Hi
>
> >
> > Ok, after managing to read more of the manual I have found the reason I
> > didn't see the .s file was a -o file command telling the compiler to save
> > as .o anyway.
> >
> > I really just want the compiler to use the appropriate extension, but
> > suspect this is the result of my specifying a directory for 'object'
>files.
> >
> > What should I be modifying to allow me to save output files to a
> > sub-directory, but without mandating the extension so that the compiler
> > will use the appropriate .s or .o as required.
>
>Have you tried
><MainMenu/Project/Project Options/Build Opti..../Object file output
>directory>?
>
> >
> > Thanks, Patrick
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: IBM Linux Tutorials.
> > Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> > Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> > _______________________________________________
> > Dev-cpp-users mailing list
> > Dev...@li...
> > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users

hi ..
thank you for your instant reply..
I am writing startup code for my gcc compiled program for SH on custom made
board. The code that is been generated is fine. But now, I want to add my
own startup code.
What i have to do..does I need to write a small piece of "free-standing"
code, i.e. it will contain its own startup code .
can u give some guidelines..
how i have to start
regards
smitha

> -----Original Message-----
> From:	Per Westermark [SMTP:pw...@ia...]
> Sent:	Monday, December 29, 2003 5:21 PM
> To:	Smitha V. Babu
> Cc:	dev...@li...
> Subject:	Re: [Dev-C++] write a startup code
> 
> You have to come back with more information. Are you building some
> embedded system or? That is the only reason to write own startup code.
> 
> /Per W
> 
> On Mon, 29 Dec 2003, Smitha V. Babu wrote:
> 
> > hi ,
> > Does any body know how to write startup code..
> > How i can tell the processor to go to main function execute a particular
> > function..register exit functions...
> >
> > regards
> > smitha
> > *********************************************************************
> > Disclaimer: The information in this e-mail and any attachments is
> > confidential / privileged. It is intended solely for the addressee or
> > addressees. If you are not the addressee indicated in this message, you
> may
> > not copy or deliver this message to anyone. In such case, you should
> destroy
> > this message and kindly notify the sender by reply email. Please advise
> > immediately if you or your employer does not consent to Internet email
> for
> > messages of this kind.
> > *********************************************************************
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: IBM Linux Tutorials.
> > Become an expert in LINUX or just sharpen your skills.  Sign up for
> IBM's
> > Free Linux Tutorials.  Learn everything from the bash shell to sys
> admin.
> > Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> > _______________________________________________
> > Dev-cpp-users mailing list
> > Dev...@li...
> > TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> > https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
> >
*********************************************************************
Disclaimer: The information in this e-mail and any attachments is
confidential / privileged. It is intended solely for the addressee or
addressees. If you are not the addressee indicated in this message, you may
not copy or deliver this message to anyone. In such case, you should destroy
this message and kindly notify the sender by reply email. Please advise
immediately if you or your employer does not consent to Internet email for
messages of this kind.
*********************************************************************

You have to come back with more information. Are you building some
embedded system or? That is the only reason to write own startup code.

/Per W

On Mon, 29 Dec 2003, Smitha V. Babu wrote:

> hi ,
> Does any body know how to write startup code..
> How i can tell the processor to go to main function execute a particular
> function..register exit functions...
>
> regards
> smitha
> *********************************************************************
> Disclaimer: The information in this e-mail and any attachments is
> confidential / privileged. It is intended solely for the addressee or
> addressees. If you are not the addressee indicated in this message, you may
> not copy or deliver this message to anyone. In such case, you should destroy
> this message and kindly notify the sender by reply email. Please advise
> immediately if you or your employer does not consent to Internet email for
> messages of this kind.
> *********************************************************************
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________
> Dev-cpp-users mailing list
> Dev...@li...
> TO UNSUBSCRIBE: http://www23.brinkster.com/noicys/devcpp/ub.htm
> https://lists.sourceforge.net/lists/listinfo/dev-cpp-users
>

hi ,
Does any body know how to write startup code..
How i can tell the processor to go to main function execute a particular
function..register exit functions...

regards
smitha
*********************************************************************
Disclaimer: The information in this e-mail and any attachments is
confidential / privileged. It is intended solely for the addressee or
addressees. If you are not the addressee indicated in this message, you may
not copy or deliver this message to anyone. In such case, you should destroy
this message and kindly notify the sender by reply email. Please advise
immediately if you or your employer does not consent to Internet email for
messages of this kind.
*********************************************************************